Liczymy pasujące modele…
Description: Here's a little vase I designed called Blossom. I was inspired by organic, generative design when I came up with it. Included you will find 3 variations with different amount of twist as shown in the preview image. The…
It's a fully printed, pocket size crossbow Have fun! don't hurt anyone How to make it print the file kitcard_crossbow.stl seperate all the parts (maybe using a small wire cutter) take the part with the R and put the pins in connect the…
EDIT 6/8/2020 - Added my S3D FFF configuration in the Files section in case anyone wants to download it Gcode to print a 3DBenchy sliced in S3D Chris Elkin profile with retraction changed to 6mm @ 60mm/s Honeycomb infill 20% Jerk 10,…
This print in place cat toy contains a rattling ball that looks impossible to get inside the toy. Luckily all you have to do is print it place with no supports and you have a toy your cats will love. Oliver Tested and Approved!
A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required…
What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
This is a remix from DavVvEs design from here: https://www.thingiverse.com/thing:3950437 My changes: - cut in 2 halfs to make it printable without to much supports - added “thick axes” so the spoke rims will hold the 3mf & gcode contains…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Give some life to your business card with the embosser system. 1 Design Included: Lightning Wanna make your own Custom Rollers? Fusion360 files + video tutorial → FUSION360 FILES Get the FULL 13 PATTERN PACK here:…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
Our Father WHO are in heaven Cross 0.3mm layer high ,100% infill, 0.3/0.3/0.3mm walls
The main parts are FDM printed, while I used SLA to print the dies and the backstop, mainly to get the surface finished I wanted. I printed most parts on a Markforged printer with CFF Kevlar reinforcement, but they would probably work…
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
Edit July 17 2023: Added symbols $ % # € ! ? & Edit August 6 2023: Added special characters like Ü Ö É Ç Å At 100%, the letters are roughly 13mm tall (or about ½ inch). I tried scaling down to 65% (8mm letters) and that still worked. Try…
For this to work you have to download the casing from my Business card Embosser (LINK!) Hexagons are the bestagons! Hexagon / honeycomb Rollers for the Business card embosser! (Only rollers, no casing) More rollers will be added in the…
The Design Since some have asked for other shapes, here is Version 3 of the Impossible Passthrough/ Vortex Thread Illusion with an Octagonal Base This also fits perfectly with Impossible Pyramid Passthrough, Greater Clearances give smooth…
A Jesus cross for you wall...
For the “Last Meters” contest i thought it would be fitting to print something that not only uses a little of plastic, but also something that is actually good for the environment. If personally hate using floss and instead use…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
XY Size Compensation on the Inner Piece at -0.4mm
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I used coin artwork from the Pokemon card…
Description For this to work you have to download the casing from my Business card Embosser (LINK!) For al electronics and PCB entheusiasts! PCB / Circuit board Rollers for the Business card embosser! (Only rollers, no casing) More…
Verleihen Sie Ihrem Indoor-Garten mit dem Moosstab-Set eine elegante und präzise Lösung zur Verbesserung des Wachstums und der Präsentation von Kletterpflanzen. Das umfassende Set enthält einen sorgfältig gestalteten Moosstab – Dieses…
Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…
Here's my take on the painter's pyramid. I've designed it in three sizes, measured by the long edge of the triangle. The design is meant to be 3D printer friendly such that you should not need supports to print this. Update: I printed 6…
Moss pole You may also liked some of these projects: https://wivry.gumroad.com ------------------------------------------------------------------------------------------------------------- If you want tu support me, you can buy me a cup…
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength. BOM and instructions are in the provided pdf assembly…
Squid Game - Osselet Set [Updated] Ready to Print Squid Game-Inspired Jacks Game (Osselet) from Netflix Dive into the thrilling world of Squid Game with our unique jacks game! Inspired by the intense challenges of the hit series, this…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad Here is vase number 7, it is a unique twisting and…
Original part : https://www.thingiverse.com/thing:4946522/files Enjoy
Hello everyone! We have exciting new products for you. With the plant repotting season arriving, we’ve prepared something special. We’ve designed three plant support models in the popular "Bøje' style! They are modular and customizable to…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
XY Size Compensation on the Inner Piece at -0.4mm
Tic Tac Toe in a box Easy to print without supports Print one base and lid, and 5x Cross 4x Nought Make sure you have 'print thin line' checked when printing Use some 1.75mm filament for the hinges Category: Games
BIG EDITION IMPOSSIBLE PASSTHROUGH FIDGET TOY A BIGGER FIDGET TOY FOR MORE FUN.250MM!!!!!!!!!! WARNING:FOR THE {{{GREEN PART}}} {{{OUTSIDE PART}}} BEACAUSE I HAVE 2 FAILURES WHEN THE PRINT GOES ON 4h30min YOU MUST TURN THE SPEED ON…
For unknown reasons, we were banned by the official administrator for not meeting the conditions of the match. Officials did not give us an explanation for the specific reason. Considering this situation, we are extremely puzzled and…
Paper Embosser Stamp Heart Liked the embosser stamp, but did not find a heart shape, so I made one. The paper may show some creases around the shape, that's normal. It's reversable so you can use it to Emboss or Deboss. Update: Added a…
Stackable Moss Pole v 1.5.1 by MochPoch New Bamboo moss pole system has been released. Click here 🌱 This project came about after a search for a moss pole that has: moisture retention stackability sturdiness reusability The design is in…
Make your own name or message out of moss using the 3D printed self-supporting moss letters. No need to glue as the structure holds the moss in place. Letters can be displayed on a table or hang on the wall. Reindeer moss is natural and…
I wanted to try designing an impossible pass through model and decided to use a simple 20mm calibration cube as a base. The tolerances between the parts measure 0.4mm - so it's rather simple to accomplish a working 3d print. Please…
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
This cat toy is unique and puzzling to comprehend at first glance, but prints all at once with no supports. The ball inside rattles around but cannot be removed from the D20 (trust me, I've torture tested it with my cats). It also makes a…
Color Change: 0.0 - 2.0 white pla 2.2 - 2.6 black pla If you rescale, turn off uniform scaling and put z value back to 100%, otherwise the color settings will change. COMMERCIAL LICENSE ACCESS is available through a patreon membership…
Especially for Valentine's Day, I created a cool version of the rose stem in maximum height (220 cm). The leaves can be shaped using a hot air dryer, as described in the original object…
XY Size Compensation on the Inner Piece at -0.4
This is a fully working crossbow designed to shoot toothpicks ! It is remarkably powerful for something this size, it will penetrate cardboard and has a maximum range of 15 meters. This is a modular design that allows you to fit which…
This design represents a dental floss holder that fixes the main problem of almost all floss holders - tensioning! Floss tends to stretch almost immediately, causing handling problems. My design uses a movable part that serves the…
My wife wanted a simple cross to use in a Sunday School lesson, so I did this really quickly in Fusion 360 for her. Print instructions Category: Models Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Původně určené pro mech, ale ten z lesa může být plný různých brouků, které doma asi nikdo nechce, tak jsem použil sušený Rašeliník Jihoamerický. Modely jsou různě dlouhé, aby je bylo možné vytisknout i na malé tiskárně a jdou kombinovat,…
I designed these three fidgets that are interchangeable. Let me know if you would like any other shapes. NON-COMMERCIAL USE ONLY
What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…
This is a remix of @MattGerman original design. Added a hanging feature and 10mm off set to create floating effect.
XY Size Compensation on the Inner Piece at -0.4mm
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
To print these designs, you can use your regular slicer settings. All the models are pre-oriented and can be printed without supports. Print them in two colors of pla/petg to achieve a stunning two color effect, or do a few color swaps at…
The Design Here's a new Tall mini version of the impossible passthrough! Fully Compatible with the V2- Mini Vortex Thread (see end of gif) The “male” part of the thread seems to defy physics by passing through the slightly larger “female”…
The largest part of the ship is used to test whether your printer can print the entire model. Printing takes more than 30 hours and it is necessary to place suitable supports in it. This is the biggest (test part) of FOSS which is…
Watch the video! https://www.youtube.com/watch?v=dX8qQVWYcw4 Materials needed: 3D Print Files 1mm Metal Rod (Steel, brass, copper, etc.) 1 Mini Rubber Band (Rainbow Loom® or equivalent) Gel Super Glue (For sturdiness, but not strictly…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
A print-in-place crossbow that fits in your wallet. It has 3KG of draw weight allowing it to launch the arrow up to 5M. The model prints excellent in PLA and it has some power too! The arrows are in a separate kit card because you are…
print-in-place Toothpick crossbow with a strong spring! fast and easy print! https://www.printables.com/model/1790509-tripple-toothpic-crossbow-shotgun-15m-range for 2mm diameter of toothpick
Remixed version of Jesus Christ on the cross, nails and thorns can be removed if it cannot be printed that scale (requieres big prints or high resolution resin printer) it is also possible to print Christ separately from the cross, it…
For this to work you have to download the casing from my Business card Embosser (LINK!) A bigger handle for more comfort? That's what a lot of makers of the Business Card Embosser asked for. So I created this handle. Hope this makes…
XY Size Compensation on the Inner Piece at -0.4mm
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Safer, Tougher and Easier to play with than other designs Here we have the Pointless Impossible Passthrough Cone. This has been specifically designed to be easier to play with There are no pointy parts on this design and its much less…
I know this is gonna be hella useful for all the spider-man cosplay groups! If im completely honest… 50%of the work was pressing the spacebar real quick to go trough all the trailers frame by frame whenever this was on screen I made this…
Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…
Hi guys, here's my Impossible phone stand! Seeing some of the amazing tensegrity structures on internet I had to give it a try. I wanted to give this stand a floating / hovering sense and make it unlike any tensegrity structure I've ever…
Three numbered pieces interlock to form an impossible-looking cross. No glue, magnets, screws, or additional parts are required. The model prints quickly and requires no supports. The video demonstrates one assembly method, but there are…
Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…
Flexi Cross Key Chain Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2 Infill: 20 Filament: Any PLA Category: Accessories
I saw this awesome illusion in a magazine. I decided to design it in Fusion for 3D Printing. The goal was to make it without needing any supports while keeping it in one piece. While there are other version of impossible cubes on…
The Design Back by Popular demand with a Mini Pyramid Passthrough. Compatible with the rest of the V2 Series Now in the shape of a 3 sided pyramid (a tetrahedron), The “male” part of the thread seems to defy physics by passing through the…
https://youtube.com/shorts/-iw4TS414UA?feature=share https://youtube.com/shorts/D5Yad8CSc_k?feature=share Mini rubber band crossbow with multiple attachments Prints easily with no support and assembles quickly Wear eye protection because…
Floss holder which provides notches for the floss to hold fast and taut. Printed in PETG. Holding power is more effective by pressing a x-acto knife or chisel into the notch.
Finally sharing my first ever designed-from-scratch dart blaster! This one is a stringer, modeled after a medieval crossbow. It is optimized for Nerf Ultra darts (I like them for stringers since the harder foam doesn't get damaged as…
This is not my model or my images, credit to Muzz64 on Thingiverse . Quoted from his item details: "Fish Fossilz are an amazing one piece print that wriggles, twists and bends in all directions. It's an easy print that only uses about…
Easy to print, tought and compact construction. Without supports. Category: Construction Toys
A twist on the famous Moai statues on Easter Island. Use glue stick when printing. Also needs support. I used tree supports with 30 degree threshold angle from build plate only. Remove small overhangs.
XY Size Compensation on the Inner Piece at -0.4
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
structural integrity holds up enough to print in PLA can be printed at any scale, but at double size it became really hard to pull back the firing mechanism even at the regular size these pack a punch, so be careful
XY Size Compensation on the Inner Piece at -0.4mm
Summary This is a model of a Ferrari Testarossa (512 TR) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…
Stackable moss pole with leaf pattern ideal for climbing houseplants. The pole comprises three parts - the anchor, the main pole and the cap. The cap is not necessary, but it closes the pole nicely. All the parts are connected by bayonet…
Simson S51 Werkzeugkasten Der Werkzeugkasten setzt sich aus folgenden Bauteilen zusammen: der Kiste selbst dem Deckel einem Briefkastenschloss 4 kleinen Kabelbindern Das Schloss sollte einen Durchmesser von 16 mm haben und einer Länge von…
What this does Helps you correct XY print scaling issues methodically and repeatably instead of guessing or coarse whole-object scaling. Works for Z too (though this tends to be less of a problem with FDM printers). Gives you an easy way…
At first, this piggy bank appears impossible to open, with a dovetail joint on all four sides. In reality, this is a simple box with two parallel dovetails, spanning the same direction as the coin slot. Print Instructions: Print both…
Printed in PETG for strength but may be usable in PLA. Requires a small elastic band, I used a 1mm thick 40mm diameter band. Fires small safety matchsticks, the attached 3D printable match STLs or similar size projectiles. Ensure you only…
Print Info - Any Material Infill 20% or more Print with the top facing up. No supports. Just over 3" now, use slicer scaling to make it smaller if needed.
Spring is coming! So I made this delicate, floral-inspired tray to elegantly hold your cherished jewelry and small treasures. __________________ Notice: These designs are copyrighted and intended for personal use only. Commercial sales,…
Share a photo of the printed model 🗿 Remember to give me a like 👍 https://www.instagram.com/kuleshow/
![Squid Game Gonggi - Korean Jacks - Osselet Set (Jacks Game) [Updated]](https://media.printables.com/media/prints/1123432/images/8479780_aec8d906-b096-4e90-bd50-58292bb4f8b6_f838fc03-0805-4fb2-898a-edf94517cb3f/screenshot-2024-12-27-221040.png)
