Liczymy pasujące modele…
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
3D print that makes your princess smile can you imagine having a Louis Vuitton 3d printed bag! https://youtube.com/shorts/QiX06X8ADd0?feature=share Excellent TEST printing ...which makes you understand your printer better! easy to print…
Drain Hole removed, negative volume body improved for easier printing. large overhangs reduced inside the bag. Printed with PETG prusament with 5 % giroid infill and 3 outer walls.
Douille complète en fichier STEP pour utiliser lors d'un design afin de calculer si les dimensions sont exactes et positionner son ampoule correctement. Je ne trouvais pas ce genre d'objet en step ou F3d donc je l'ai fait pour fabriquer…
Louis Vuitton logo in 3D. 5mm high.
Say bonjour to tiny Chef Remy! 🐭👨🍳✨ Tiny model of Remy from Ratatouille. Handle with care - he’s so tiny, he might get ripped off the printing bed - added a brim setting that keeps this chef firmly in place. (The first attempt came off…
Louise Belcher : Bob's Burgers – Keep your eyes peeled for Louise Belcher nightmare version. Done: Fine it here: https://www.printables.com/model/932971-nightmare-louise-belcher
🇺🇸 Welcome to St. Louis! This model was created by Dany Sánchez . The Gateway Arch is a 630-foot (192 m) monument in St. Louis, Missouri , United States. Clad in stainless steel and built in the form of a weighted catenary arch, it is the…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Spirit of St Louis This is another plane for your collection : the incredible Spirit of…
Pochoir Louis Vuitton , décoration de mur ou autre objet. Le pochoir est fin afin de permettre un certaine souplesse lors de son utilisation.
Color sequence is as follows red, yellow, white, navy blue.
Just a fun little project I did to make a gift set for somebody.
Why another design First of all thanks to Ruvy for his design . But unfortunately I had to realize that the diameter and thickness of his design did not correspond to the dimensions of my Looping Louie game. That's why I created my own…
may your bird bath in luxury. included mounting ring must be glued to the bath.
Introducing the exclusive Louis Vuitton Labubu design! Bring high fashion into your 3D printing studio! ✨ This charming designer toy, featuring a bucket hat and overalls, is characterized by the iconic monogram pattern. A perfect model…
3d miniature of New Orleans, Louisiana! Check out my collection of other miniature cities: https://www.printables.com/@jarvizar/collections/1124416 Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and…
The adapter plate is pretty simple to print, it only has a few places with straightforward overhangs. No additional hardware besides a phillips head screwdriver is required. After the print is finished, you need to unscrew the base of…
Halloween spirit, are you there ? For a lot of fun with friends or Halloween decoration ! Be careful, I do not take responsibility for the spirits that may have lapped in your places ! Print with no MMU.
The LOUISE vase has a classic spherical shape with a sleek ribbed pattern that catches the light beautifully. The narrow neck gives the vase an elegant appearance. It's a design that feels timeless. Place this vase on your sideboard or…
I saw @JohnAustin_465615 ‘s amazing Halloween Coffins model and was wowed by the design. But the original models were designed for use in a multi-material capable printer, specifically printers from Bambu. So I remixed them to be…
Love the St. Cardinals? This great raised logo that you can have at your desk! Printed at .2mm layer height, 20%infill (you could use more), and 1 color change (at layer 60 or about 12mm)
peut être imprimer en 1 ou 2 couleur
IMPORTANTE No hace falta Soportes en ningún archivo MEDIDAS X. Ancho: 35,96 mm Y. Largo: 34,75 mm Z. Alto: 05,87 mm APROXIMADAMENTE IMPRESORA: Creality Ender 3 pro Louis Vuitton: 17min
gucci, kanaal en louis vuitton-logo
(((-- Si vous appréciez ce partage, pensez à cliquer sur "j'aime". Ça m'aide à proposer du contenu --))) Ce récupérateur de douilles fonctionne avec quatre aimants 5x4mm que vous devez coller à l'intérieur des emplacements prévus. Il…
Louisiana, USA (LA) Topographic Relief Map with Rivers and Coastal Waters Louisiana, USA bays, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Bust of Louisiana Creole practitioner of Voodoo. Also included are Planter Versions. Note: Some of the files are for just the bust and some files are for the Planter version. Stunning. One of my favorites.
I made this pedestal for a colleague, and i think it turned out nicely. I made it simple so it's easy to color change between the pedestal and the logo. I made it for the Prusa mini, but works for all kind of printers. My settings and…
مرحبا بكم في تونس marhabaan bikum fi tunis Bienvenue en Tunisie! Wecome to Tunisia! A "ksar" is a fortified granary built by the Berber, a native ethnic group from Northern Africa. This one is modeled after Ksar Ouled Soltane , located in…
This is a St Louis skyline silhouette I made and printed. It is broken down into three sections to be printed larger.
Récupérateur de douilles pour CZ457 LRP 2 versions, une à "cliper" dessus, et une avec ressort. Pour la version à ressort, il vous faut, donc, un petit ressort, et coller ( ou visser M2 ) les pièces, Casings recuperator for CZ 457 LRP 2…
Imprimé en PLA à 40% pour être sur de ne pas déformer le moule. Pour plus de détail en 0.12 Faciliter le coulage en commençant par la queue, le refermer et ensuite continuer la couler par le haut.
🖤 Louis Vuitton Logo with Stand Chic decorative piece for fashion lovers – conic LV logo as a sleek 3D print with base. Perfect for shelves, desks, or display cases.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Gardena water tank fill cap for a McLouis RV MY2010. Update: added a new version "Verstevigd" where the tabs are wider so they don't break anymore. I used this for the last 4 weeks without any issues so I released it to the public. Print…
A simple model to prop up plant cuttings! Use it with empty Oui yogurt jars. The lid fits in loosely into the top. I printed it on the Bambu textured PEI plate with a 0.1x0.1 fuzzy skin and 10% gyroid infill. I welcome your ideas on how…
This is my 3D Printed Version of the Remy for a Linguini costume from the movie Ratatouille. It has articulated arms that can be connected to your arms with fishing line or something similar to mimic the puppet movement of Remy…
socket e14 to use in your projects where to transform a bust into a lamp for example
Had a bunch of small glass jars and didn't know what to do with them. Also wanting to start some home gardening so I've created these nets for Oui Yogurt glass jars. Designed in such a way that I can print 2 at a time on my QIDI Tech…
Re-upload notes This is my favorite Oui yogurt lid design. I like printing it in PETG at 0.2mm layer height with 15-20% infill. If you're using transparent filament, gyroid infill makes a neat wavy design. You might want to put the Z seam…
I lost the files for my original Alph figure so I thought "might as do it all again" (also throwing in Louie for fun lol) The original figure used an official Olimar amiibo helmet, however since that isn't viable for recreating this in…
Remixed from a model found on Thingiverse. Original here: https://www.thingiverse.com/thing:4538864 Added a flat stand and the “Cardinals” stylized font from the official logo.
Quand vous télécharger un j’aime sa fait toujours plaisir ! si vous avez perdu votre clé, vous pouvez l'imprimerie très rapidement imprimante elegoo neptune 4 remplissage 70% pla 220° plateau 60° support a votre goût / oui (pour garder la…
Ideálně tisknu ve velikosti 29 mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The team is at it again with more counter surveillance tools. OUI SPY by colonelpanic.techcolonelpanic.tech SMA mount or no_SMA just to add your own m3 spacer to replace standoff. Battery holder add-on for 1000mah battery. Switch mod for…
Printed in Black PLA on the Elegoo Neptune 2 (I know my print quality is trash) Print in smaller layer height to capture details 100% scale approx. 25mm diameter mouth side approx. 67mm height 100% infill No supports necessary Make sure…
Blaster from Space Patrol Orion Blaster from Space Patrol Orion (Raumpatrouille Orion), a German 1960s' Science Fiction TV series that never gained traction outside Germany since it was produced in black and white in a time when everyone…
me❤the clipper lighter lemme know what ya think bout it 🤞 plz share ur makes ❤ ==> check out my other Clipper Sleeves <== 🡇 printer: Bambulab P1S 🧱 infill: 10% 🧬 support: no Category: Fashion
Revised 6 October 2025 Added endcap to attach the antenna to the top of a fiberglass driveway marker. This is easy to deploy: just push the driveway marker into the ground and slide the antenna on top! In the photos, this is the orange…
The Louis Vuitton Logo for a perfect fit on your Beanie, Car, Computer, Jacket, Or where ever you would like to put it! **Pictures are 3D renders**
This great scan was made by Rigsters using photogrammetry: https://sketchfab.com/models/d5e6b6a11da646f68a5fcba661dcae99 # I edited the mesh a bit, scaled and oriented it and made a flat base. https://www.3dwp.nl More info: Lion Crushing…
Lake Louise is world famous for its turquoise lakes, the Victoria Glacier, soaring mountain backdrop, palatial hotel, and incredible hiking and skiing. Surrounded by a lifetime's worth of jaw-dropping sights and adventures, Lake Louise is…
Its a board game named ouija board To play a Ouija board, sit opposite another person, placing the board on your laps or a table. Lightly rest your fingertips on the planchette. Ask questions clearly, allowing time for the planchette to…
LOUISE - BOBS BURGERS - WALL ART
pour ranger les douilles ou autres accessoires avec un carre de ½" et 3/8" comme c'est pour la mécanique c'est mieux d'utilisé un filament résistant aux produits chimiques , j'ai utilisé du petg le fichier pour freeCAD est fournit buse :…
About There is no text included in the .stl file. On the example photo letter stickers are used. The original dispenser holds a maximum of 42 (three rows of 14) bouillon cubes. The cubes should have a size of 37 x 22 x 10 mm to fit. These…
taquet de remplacement pour golf 3 volkswagen locking tee for vw golf mk3's doors Category: Automotive
I had way too many yogurt jars and instead of recycling them, I decided to use them to store and organize my tools. Now i just need to print 10 more of these! I printed these upside down with supports (support placement: touching…
It cuts cookies and imprints the louis Louis Vuitton on the cookies. It is backwards on the cutter so that the imprint is correct
Puzzle d'une grenouille composé de 18 parties, facile à assembler dimensions: 128,5mm x 120,5mm x 110,5mm résolution 0,20 remplissage 33% besoin de support
Louis Vuitton - coffee stencil
This is a model of a St Louis Blues logo for the mmu. Load all models into prusa slicer at once and select yes on the pop up then pick the colors you are printing with on the right and happy printing. Hope you enjoy.
cadre de 17 cm de nounours LV parfait pour décoration d'intérieur….
Sturdy little basket that fits leca and drops into Oui brand glass yogurt jars. Prints without supports
tenký přívěšek LV
I like to print these logo side down on a smooth sheet.
St Louis Cardinals Oversized Necklace Alternate Logo that I designed. I hope that you enjoy!
j'ai voulu réaliser un model de chucky original a tête de citrouille avec la tête de chucky décapiter dans sa mains
mécanisme déverrouillage de chargeur fonctionnel pour M4 airsoft Category: Sport & Outdoors
louis vuitton plug 20mm nozzle 0.2
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! Bienvenue a Maroc! This model was designed by Dany Sánchez . The Sqala du Port is an artillery platform built in the 1770's in Mogador (today Essaouira), Morocco. It is one of the main…
This is a case for Colonel Panic's OUI SPY that includes SMA antenna and USB socket holes. There is a built in channel under the OUI SPY for cable management. Use the included wedge to help secure the PCB in place. Everything fits best if…
Scroll down for the english translation… “LOUIS” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
'Louis' a 3D name for a good friend in TO. Done with SketchUp using Google's Courgette font. 127 mm long x 45 mm high x 20 mm deep. Print instructions No rafts / No support 0.3 mm resolution at 15% infill
!!!try the upper Download first!!! The other one is a little less optimized and only looks good in cases with rounded out camera buper edges. Looks great, only takes a few minutes to print and works best with completely translucent cases…
Here's another state capitol building I did. Category: Buildings & Structures
This is a bouillon cube dispenseŕ made for the 'KNOR' bouillon cubes. these have a different dimmensions
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
This stylish Louis-Vuitton–inspired threaded container brings a designer touch to your storage setup. Featuring a clean screw-top lid and a premium patterned style, it’s perfect for holding small accessories, coins, jewellery, office…
Here is a minor remix of Fichthorn's Spirit of St. Louis. I've split the plate into parts for three colors - white for the fuselage, wings, tail, and struts, silver for the front part of the plane and propeller, and black for the wheels…
Iconic Movie Moments - Thelma and Louise - The Final Scene - 1991 3D printable model.
I created a Caricature Bust of Louis de Funès just for fun, this actor will live on the silver screen forever. My print settings(PLA): 0,16mm layers / 2walls / 10%gyroid / Tree supports (25°) / Brim Happy printing:)
modèle Louis Vuitton en Nounours de 17 cm parfait pour de la déco d'intérieur
Go Blues! Congratulation for the championship! Here is the phone stand for the fans. Print instructions Category: Mobile Phone
Petit Puzzle sur le thème d'Halloween. Sous PrusaSlicer, décollez les éléments du puzzle pour un meilleur résultat à l'impression. Car selon les filaments PLA il arrive que les pièces collent entre-elles. Et supplément dans les fichiers,…
This model is Louis Tomlinson's signature, his typical smiley face. See more: https://www.instagram.com/p/CIu2buvHi3Q/ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 mm Infill: 100%…
Show your Cardinal pride
I made this model of the University of Louisville Cardinal logo to practice some 3d modeling techniques in Rhino.
I created this as a sort of moonshot project idea after getting my first 3D printer. My goal was to create a scale model of the Gateway Arch by using the same engineering drawings and plans as the original, using Autodesk Fusion as the…
![[Clipper Sleeve] Louis Vuitton](https://media.printables.com/media/prints/1338257/images/10097152_744f5c0f-3308-46bb-9df6-dedac0197bb1_9d523e02-c121-400b-ae94-62d76d598684/large_display_clipper_sleeve_-_louis_vuitton_1338257.png)
