Liczymy pasujące modele…
Some people really like the wheel on the Bosch PBD 40 drill press, others replace it with a traditional 3 axle cross. I got inspired by a different idea by user mbatorowicz over at Thingiverse. He added a knob to the wheel. However there…
I liked the design by Andreas Gohr and changed a few things to my taste: chamfers on the mounts one mount with hex nut trap, so now two different mount pieces exist only 1 mm gap between the mounts that disappears if screwed tight BOM is…
T-Nut drucken mit PETG infill 100% ohne Stützen Düse: 0,4mm Schichthöhe: 0,2mm Die Fläche mit dem Sechskant auf das Druckbett. Zwischen Sechskant und dem Loch ist eine Drucklage um das Loch drucken zu können. Nach dem Druck einfach mit…
An meiner PBD 40 von Bosch ist der Hebel für den Tiefenanschlag kaput gegangen. Also habe ich mir einen neuen erstellt. Ich habe zwei Versionen dafür zur Verfügung gestellt. Einmal die Version als Vollmaterial und einmal innen hohl.…
This is a sturdy hand feed lever for my new Bosch PBD 40. Design All my design done in Autodesk Fusion 360: https://a360.co/3L7jFKj The 3mf files include all settings. I opted for 6 perimeters and 30% infill for stability. The ball has an…
La perceuse à colonne Bosch PBD 40 (comme les autres) est dépourvue de système d'aspiration. Mais sa pince à serrage rapide offre une possibilité évidente d'aspirer au plus près du trou. Voici donc un “sabot d'aspiration” qui se fixe sous…
suction adapter mount on the base "rod"
I have a very small workshop, so I have to get creative with my tools. I am using the drill press as a rotary sander and needed a way to quickly attach dust collection. It works perfectly! If you want the same setup, just buy the sanding…
Drill press vacuum adapter for Bosch PBD40 including Bosch Click and Clean hose plug
A set of inserts for the Bosch PBD40 drill press table. Using each drill bit with a matching insert (e.g. 10mm drill bit with 10mm hole insert) will help to get clean edges where the drill bit comes out of the material (wood). Use a sharp…
Hallo! Ich habe mir mal endlich einen kleinen Absaugring für meine Bosch PBD40 gebaut! Ich habe einen Schwarnenhals mit M8 Gewinde verbaut! Gibt es bei eBay oder Amazon in verschiedenen Längen Support habe ich nur von der Druckplatte…
This is a remix of the knog from this project https://www.printables.com/model/153460-bosch. I only added the Bosch logo
Drill bit and accessories holder for Bosch PBD40 ( or any other 46mm drill press shafts ). Hollowed bottom for material savings. Clamping area left .2mm larger for you to stick some sort of non-slip tape on ( not necessary ). It consists…
This version is significantly improved - position is set independently on the column, size (and filament) was reduced, nozzle is independent part (sometimes can be destroy by drill bit) Additional parts: threaded rod M8 - 85-88mm DIN912…
Material: PLA+ Druckereinstellung: Layerhöhe 0,25 mm / Infill 70 % / Support 5% Zusätzliches Material / additional material: Schraube / screw M4 x 35 mm Mutter / nut / DIN934 Gutes Gelingen und über ein Like würde ich mich freuen. Good…
A 3D printed replacement ring for the wheel on your Bosch PBD 40 drill press. This new ring includes 3 easily accessible knobs that in my mind is missing on the original design. There are for sure several add-on designs for knobs, but…
Replacement lever for Bosch PBD40
Very simple rubber feet to prevent scratching the desk surface that the Bosch PBD 40 bench drill stands on. Printed from hardest TPU I had (68D). Print multiple parts at once or slow down print to avoid melting of narrow upper part.…
The Bosch PBD 40 drill press comes with a stop angle for easier drilling. The only problem is that there is no way of storing this stop angle on the drill press itself. And this if what this holder is for. It provides an easy way of…
Wobble Reduction Support Kit Compatible with Bosch PBD 40 A 3D-printable stabilizer kit compatible with the Bosch PBD 40 bench drill, designed to reduce unwanted forward-and-backward movement and wobbling during use. The kit adds an…
Did you know that you can use this stand drill as an arbor press? It works surprisingly well for kydex rivets and snap buttons. DIMENSIONS: Fits two differently sized round base tools diameters: 20mm (Fits a kydex riveting tool base) 24mm…
The Bosch PBD40 is a modified version of the handle design for the drill, adapted to the M8 rod with some changes. Print Settings PLA 4 walls 5 bottom and top layers 0.2mm layer height 40% infill density Material list 180mm x 3 M8 Rod 3x…
Install the toolbox inside the main column and use the original lid. The fit into the column may be a bit tight. If needed take a sandpaper and adjust the fit. I put a plastic bag with allen wrenches and spare carbon brushes inside the…
I have added a better bolts ends for easier arms attachment to the main part use super glue to glue two bolts in each end of the hexagonal hole one deep inside the hole glue it then one at the edge of the hole this way it give it more…
I was always annoyed that there was no holder for the included Allen key. That's why I designed this mount, which can be attached to the back using the original screw in place of the cable clip. The cable can still be secured as before. I…
Loved the original model but wanted them labelled. So this is a quick and dirty remix to add some markings.
A 3D printed replacement ring for the wheel on your Bosch PBD 40 drill press. This new ring includes 3 easily accessible knobs that in my mind is missing on the original design. There are for sure several add-on designs for knobs, but…
The Bosch PBD40 is a modified version of the handle design for the drill, adapted to the M8 rod with some changes. Print Settings PLA 4 walls 5 bottom and top layers 0.2mm layer height 40% infill density Material list 180mm x 3 M8 Rod 3x…
I modified VerbalInsurec_260682's design to make a wheel spinner that fits my Bosch drill press. It is a useful upgrade for the hand wheel that is otherwise difficult to use. Instead of pausing the print to insert the bearing and then…
The Bosch PBD 40 drill press comes with a stop angle for easier drilling. The only problem is that there is no way of storing this stop angle on the drill press itself. And this if what this holder is for. It provides an easy way of…
Having used following feed lever for over a year and being very pleased with it, I wanted to have a stiffer version. It works nicely but I ended up often retightening the screw in an effort to prevent some slippage when higher forces are…
This support is specifically designed for use with the Bosch PBD 40 bench drill press. It provides reliable support for long workpieces during machining operations. The guide ensures precise alignment and stable positioning of both round…
I modified VerbalInsurec_260682's design to make a wheel spinner that fits my Bosch drill press. It is a useful upgrade for the hand wheel that is otherwise difficult to use. Instead of pausing the print to insert the bearing and then…
3D Model of the Bosch PBD 40 drill press depth gauge.
This is a modification of the lever handle. Fitted with a pocket nut, the M6 threaded rod fits strongly.
I created this insert to adapt the original design to the https model://www.printables.com/it/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc I am very satisfied with both, let's see how it will behave over time. The model…
It's a nice little machine, but the lever used for switching between setting the rough height and drilling immediatly anoyed me. It feels loose and does not work well for an application were you need to rotate more than 90 degrees. And…
I wanted to create my own lever replacement, but found this nice wheel by by wololooo . I thought that it's kinda difficult to print such model, so I modified it for less hassle printing.
Wall-mounted support for the Bosch PBD40 pillar drill. Unfortunately, the column of the Bosch PBD40 isn't as stable as it appears. Especially when force is applied while drilling, the column bends slightly backward. This can be…
