Liczymy pasujące modele…
Phone Stand with honeycomb structure, it also has a place for charging your phone. I recommend you print this on its side, I printed it with some custom supports. However, I don't think you'll need supports if you print it on its side. I…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
How to use Validation Matrix (Tyler Schubert) https://youtu.be/GL-9Ia0SibQ The Validation Matrix must be printed with 4 or less base exposures for a correct test result. ------------------------------------------------------ The…
Headphone Stand by MakerBot - Thingiverse
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
Added a version with the accent embedded in the model MMU or AMS is needed unless you want to try and do a manual filament change The stand is designed to hold the phone with or without a case. Accents on the side are printed separately…
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
Mobile phone stand in a modern curved design. The picture shows the stand with an iPhone 11 Pro Max. Also check out my curved iPad holder and other designs.
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…
I wanted a phone holder for me so I design it and I print it. Print Settings : Support : tree support Brim : ON Layer height : 0.2mm Instagram: @roiku3d
keychains for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. I used this filament: http://recreus.com/es/ Advise: choose…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
Inspired by nature's powerful rhythms and ever-changing dynamic beauty, this headphone stand is my abstract interpretation of the power of "waves" and "Onami". The form draws from the sweeping power curves of crashing waves, translated…
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand. I like to design things and i also like to challenge myself ! So one thing leads to another even if the design is complete madness ;-) Be…
Keychain Phone Stand! Take your phone stand wherever you go with this sleek and compact 3D-printable keychain design! Perfect for phones up to 13 mm or 18 mm thick, this stand supports both portrait and landscape orientations, making it…
No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. PS: only works with the phone in…
Polymaker Phone Holder designed by Gulsifer and print tested by Zombiehedgehog and Pezliz: https://www.printables.com/@Gulsifer It was designed as a giveaway print for MRRF 2023 Join our Discord for more community awesomeness:…
Capybara Version v1.3 - 07 VII 2025 There is a front (head in front of the screen) and reversed (head behind phone) model and a full model without a hole for a phone Additionally there are keyring addons (to front or back) that you can…
Geared Phone stand 2 I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things - a new gear pattern , a new more finely graduated locking mechanism , charging holes…
Foldable phone stand: easy to print and easy to assemble
Compatible with charger . Added arreting screw . Your phone stand will not ever fall again! 🤯 Added support legs for better mobile stability. The gears fit together better, which allows for more comfortable tilting. Smooth design. No…
Modular Desk Organizer System – Standard Set This Desk organizer design includes four interchangeable components sized to fit together naturally. The set consists of a Classic Phone Stand , Pen Holder Module , Storage Cup Module and a…
Just a simple phone stand. Enjoy. Credit to…
headphone stand · reDesk modern minimalist headphone stand with grid patterns the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position , and will…
Inspired by the energy of waves and the elegance of natural rhythm, this sculptural phone stand merges functional balance with fluid aesthetics . Part of the Meyui Onami series , this piece explores how motion and stillness can coexist in…
About the Streamline Phone Stand: The Streamline Phone Stand is designed to be both functional and stylish. With a height of approximately 66 mm and a width of 56 mm, it offers a very compact, stable base for smartphones. The curved lines…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
A cat phone stand for all of us animal lovers. Was originally posted on Thingiverse by I don't remember who, and when I wanted to reprint I couldn't find this model again so I uploaded the one on my computer to share it over here for more…
iPhone 17, iPhone 17e, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) -…
phone stand with flexible design
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
A headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.…
If you're looking for my Bambu print profiles, they're at MW . Voronoi Mobile Phone Stand V3 (No Supports!) A lightweight, stylish phone stand built around a Voronoi lattice pattern that looks great on a desk and prints easily without…
Two minimalistic headphone stand designs. Both designs come in two variants, one for smaller printers where the base is detached and a full one.
¿Quieres un soporte para teléfono móvil simple y fácil de imprimir? Presentamos: el soporte plegable para teléfono en forma de nido de abeja. Este soporte de impresión in situ también se puede imprimir en piezas separadas para una…
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
headphone holder / headphone stand Printable without support
PROJECT PRESENTATION This project is a tripod allowing to maintain a phone in all possible positions thanks to a ball joint . The assembly is done without any screws , which however does not affect its robustness. The goal for me is to…
🆕 17.08.2025 A stronger clamp has been added to the Basic set. 🆕 28.02.2025 new parts ⬇ All parts can be rotated by 22.5°. Arm The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm . Each arm has a connection with a hole on one…
After my Simple Universal Phone Stand that got featured I got a new phone. So I made a phone holder version 2 for bigger phones and other improvements. You can print it on the side as shown in the picture. NOTE: If your phone is to big…
Simple phone stand with hole for charging cable. Four versions Material: PLA Layer high: 0,3 or lower No support needed. Brim recommended Rev 2 is with bigger hole for charging cable. Rev 3: Added version with bigger hole for charging and…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
This unique Batman headphones stand is a perfect accessory for fans of the Dark Knight. The Batman inspired design makes the stand not only practical but also a stylish addition to any desk. It keeps your headphones safe, organized, and…
Another photo studio! There are quite a few of these online, however most are tailored to smaller backgrounds, normally A3 paper sized. When I photograph my props or larger items, I quickly find the limitations. Available now is a…
We designed this to mount cell phones of any size to camera tripods, even if you have a phone case and a pop socket attached. The best part is that it is almost 100% 3d printed! You just need a 1/4"-20 hex nut and, optionally, two short…
These are two phone stands (one with a voronoi pattern and the other without) that can be printed without support material. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate…
UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide. UPDATE: The "Long" version of the screw could grip on to a 1mm…
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
There are so many different phone stands on the Internet, so it's hard to come up with something new, but I believe the TCV stand is unique. It is T iltable C omliant mechanism printed in V ase mode. It provides 5 different positions…
Designed to attach to your keychain, it folds into a compact form when not in use. Function Simply unfold the stand to create a stable support for your phone. It allows both: Vertical viewing (e.g. scrolling, video calls) Horizontal…
Update 18/12/2022 Added another version with a bigger gap. Versions: 10 and 11mm gaps (original) 12 and 13 mm gaps ------------------------------ I really liked the original design by Shepp 3D . The modifications I made: From the original…
This phone charging stand prints on it's side with no supports and features a cool knurled pattern on the backside! It provides a perfect viewing angle for watching YouTube or checking your email! * Check out the new side accent version…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
The charging cable can be used while in the stand. I use an Apple leather case and that fits good. Printed on the side. No supports needed!
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Just another take on a phone mount for your car or truck. I made this for the Samsung s20 FE, and a case. It is a rather large phone, so it could accommodate various other phones as well. Internal dimensions are roughly 6.5" x 2" External…
My dbrand grip case broke and I don't really want to get another one because they are expensive. I made this model based off of the dbrand grip with a couple of my own touches. You can expose the infill on the bottom to create a unique…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
Print in PETG at least. Some parts are a tight fit, the spacer plate and the vent clips. Everything else should have enough clearance. use 4 M3x8 screws for the cover. For phone widths from about 62 to 102mm, it is really a fiction…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
A simple stand for iPhone 11, 12, 13, 14, 15 and 16. I use an Apple leather case and that fits good. Cutout in the front to still be able to swipe up. I added a second version for those who use an apple wallet on thier phones Printing…
This is a second remix from the amazing Universal Phone Tripod mount by jakejake, as well as my first remix(tripod phone mount, no nut is needed). I printed it using Polycarbonate carbon fiber(PC-CF) as the temperature inside the car…
It's a very simple print of a portable phone stand. The hook allows it to snap to your keychain and deploy the phone stand when needed. Please measure and choose the size that fits the thickness of your phone. I recommend printing these…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
Print at 0.16mm Supports: yes
I designed this phone stand with two positions for your tablet or phone. It can be printed in a single colour or in two colours to bring out the side features as I have done using the Orca multi colour setting. It is designed so no…
The phone stand should fit on almost all printers and does require supports. I recommend you print at 0.15mm layer height and at 15% infill.
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
These models are from the (new) iPhone 14 Pro. The .obj file is for renders. (Usdz file is available but i couldn’t upload it here.) The .3mf file and stl are for 3D printing. If you just want your dummy in one single color, then you can…
Write in the comment your name and I will modify the name “Marco” with something else. Please write in the comments anything you want. Settings: You can print without supports everything apart from the frame. For that I have use very…
This is a tea dispencer box in the shape of the iconc red telephone box found all around in the U.K. when mobile phones were still science fiction. Particularly, this design mimics the K2 model of the telephone box, which was mainly…
A Harry Potter Phone Stand printed in three parts that slot together. Prints without supports
Harry Potter Headphone Stand Would make a great gift Easy to print, slots together. Use supports for the top Stands just over 20cm tall UPDATE: I have updated the top file to a thickened version that is easier to slice. The original…
The Gryphon is a mostly 3D printable, hobby-grade, Nerf semi-automatic flywheel blaster. Its main design features are as follows: Uses 130 to 180 sized 20.4mm , brushed DC motors. Semi-auto by rack and pinion with 1:3 gear multiplication.…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
This stand is fully printable and has a knob to tilt your phone. It also features a recess in order to have your charger attached while using. Print all parts in the given orientation and use a layerhight of 0.2 for the threaded parts…
Adjustable phone stand with spring-loaded hinge and mechanical lock. The curved herringbone contact surface supports the device across a wide area while maintaining grip and controlled positioning. The indexed side knob compresses the…
Onami Series Phone Stand draws from the energy of waves and the rhythm of nature, translating sculptural fluidity into a practical desktop object. This standard-height version offers a grounded, stable presence while preserving the…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
This update is based on Gavitka's remix of the updated original Modular Mounting System . This is a remix of the clamp of the Modular Mounting System . I really like the clamp but I wanted to be able to mount it on a tripod. So I add a…
With this innovative support, your pinky finger will no longer have to hold your smartphone. In addition to providing a secure grip for using your smartphone with one hand, you can always carry it with you. Its design allows you to place…
New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…
✨ RIBBON PHONE STAND ✨ I wanted to make a phone stand that looks interesting without making it complicated. That’s how Ribbon came together — a simple shape that looks like one continuous strip folded into a stand. It prints as one piece…
Deskmate is a clean, modern modular desk organizer that keeps your workspace stylish and clutter-free. 🔹 Holds pens, markers, and styluses 🔹 Phone stand fits most smartphones 🔹 Tray for USB drives, paper clips & small accessories This is…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
