427 modeli
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
A photogrammetry scan of a Sphinx statue in Prague Rudolfinum. Postprocessed in Blender 2.8 The photogrammetry software used is free and here's the video guide: and an article guide:…
Wydruk około 11,05 €–13,50 € nettoWstępna wycena jednego wariantu
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Photogrammetry scan of Antonin Dvorak's statue, which stands in front of Prague's Rudolfinum. The pictures for photogrammetry were taken with a Panasonic GH5 and Meshroom was used to reconstruct the model following this tutorial:…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
These brackets work perfectly for my DIY version of the VFLAT World photography brackdrop/background system. I made mine out of wallpaper, posterboard, and foam board from the Dollar Tree. Works great! Print 2 for a complete system.…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Photogrammetry scan of the Sitting Woman Stute by Václav Bejček from 1967. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with a Panasonic GH5 and Meshroom was used to…
Wydruk około 5,19 €–6,34 € nettoWstępna wycena jednego wariantu
-NON PRINTABLE : *2 M5 screw as many rubber band as you need The DIY telescope phone holder is a clever solution that allows astronomy enthusiasts to easily document their celestial observations. Made from plastic, this holder securely…
Wydruk około 2,70 €–3,29 € nettoWstępna wycena jednego wariantu
ZM-1, aka Monique l'aventureuse des étoiles Approximative cost : 350€ (with printed parts and electronics) Weight : 1.6 kg Usable charge : TbD, 3kg expected BoM 3D parts PETG parts (60g) : carter + support_batterie PC-CF parts (400g) :…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A measure with two pointed tips 10cm apart from each other for use as a scale reference in photogrammetry work.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips a fixed metric distance apart for use as a scale reference in photogrammetry. Designed flat so you don't have to worry so much about stepping on it.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips a fixed amount of inches apart for use as a scale reference in photogrammetry.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Simple stand/insert to store the photographers figurines in the box.
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Time-lapse photography trigger earphones for elegoo neptune 4 pro. attaches to the edge of the x-axis with a hot glue gun. printed with white PETG plastic
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print recommendations : Material : PLA Layer height : 0,3mm Brims : 5mm Perimeters : 4 infill : 15% Number : 3 Details : Printing time (for 3 models) : 21min Filament used (g) : 4 Note : The models shown on the picture are the "20mm…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
Photographic background stand
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
EDIT 9/27/26: Added new, basic assembly instruction and updated (incomplete BoM) EDIT 3-7-26: Uploaded files for the new, Linear Bearing 3D Printed Focuser! The focuser drawtube runs on two LWL7B Linear Bearings with a T5 Lead Screw for…
Composition guide to look through when framing photos
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Print Base in PLA with 5 or more perimeters for optimal stability. Print Foam pieces from TPU. I used VarioShore at 240 °C. Assemble with 2x M5 threaded insert and 2x M5x25mm cylinder head bolts.
A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
A simple cable management comb for ZWO ASI cameras with a 90mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
Miniature photographer for your diorama, architectural miniature or as a figurine. Man | Photographer | Tourist | Architectural figurines | People The photographer is wearing field clothes including a hat. He is suitable for 3D models of…
EDIT - Read full description below as some parts have changed. Please join the discord if you have questions as I may not see them here in a timely manner! - https://discord.gg/QdPa9ed6Jq Building of the success of the DBS114 , I now…
0.4mm nozzle -QUALITY- 0.08 Layer height Ironing Type - All Top Surfaces -STRENGTH- 5% Infill Gyroid infill pattern -SUPPORT- Enable Tree supports auto
Simple display made from hexagons. Sized to suit most scales of miniatures around. The plattforms fit up to 40mm bases. I recommend using a brim when printing as the sides tend to lift slighty due to the shape. Note:…
I wanted to design a few backgrounds that could be backlit for small model photography. After printing, you can back with a filter material or paper. I ended up using white index cards. The stands should be press fit, but may require a…
Printing instructions So far I have printed this model up to a size of 40% scale of the upload. At that size, it was already sensible to support the middle of the belly with some support. But I do not recommend support at the head or the…
This set of extension tubes enables macro photography using your existing Sony E/FE lenses on your Sony E/FE mirrorless camera. I've provided tubes in 7mm, 12mm, 24mm and 35mm lengths Since there are no electrical contacts, you won't be…
Downloaded PolyCam and just started scanning a bunch of figures and sculptures around my house and loved how this one turned out and how relatively easy it was to capture. I Recommend this app, unlocks a whole new way to 3d print and view…
Composition guide to look through when framing photos
So, what's this then? If you do any kind of photogrammetry, markers are great for ensuring that the software ‘recognizes’ what areas are shared between images. While scale markers make it far easier to lock said scans to the correct…
Composition guide to look through when framing photos
Miniature photographer for your diorama, architectural miniature or as a figurine. Man | Photographer | Tourist | Traveler | Architectural figurines | People The photographer is wearing field clothes including a hat. He is suitable for 3D…
Miniature photographer for your diorama, architectural miniature or as a figurine. Man | Photographer | Tourist | Architectural figurines | People The photographer is suitable for 3D models of nature, city or as a tourist. Printable for…
Using my phone to take pictures, and some photogrammetry software I reconstructed a lost pair of earrings for a friend. After cleaning up the model in Blender I printed it in resin (Mars 2 Pro). I used Vallejo Model Paints for the wood…
Tired of constantly finding squished bananas in your photo bag? With these photo scales the "banana for scale" is history. Five different scales with 1cm² squares, which are simply printed with a color change. 100mm 200mm 250mm 100x100mm…
This starfish was scanned and exported into a stl file that is perfectly textured.
One of my first tries in photogrammetry, with a really basic stand. My mother really likes the series, so I had to try it. The model is still a bit rough at some spots, but I did what I could with my limited skills. Original sculptor is:…
These are border pieces for the photo background panels by @TripleGWorkshop which allow for a gap-less box when creating a photography background using their panels. Set includes three varieties of edge-strips to avoid visual repetition…
Choosing backgrounds for your photographic endeavours can be tiresome, but it doesn't have to be! With this Expandable Photography Background Stand it's easy! Whether you want a plain green background to be able to key out in photoshop or…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
This is my first time creating a model. I would be happy to see your feedbacks and makes. I designed this model to use it during the photo taking process of my models at printables.com. The model's original size is for A4 paper. Here are…
This bread photogrammetry 3D model is a highly-detailed and realistic representation of a freshly baked loaf of bread. The model was created using advanced photogrammetry techniques, which captured every detail, contour, and texture of…
Start by making my 4x microscope adapter for your camera: https://www.printables.com/prints/143754-microscope-adapter-for-4x-macro-photography-with-s Then add this particular 4x objective (only this one is supported) to it:…
A huge set of customizable Photography Composition Guides. Use the attached OpenScad script to create your own version or stack several guides together to combine their attributes!
360° Drehteller, Drehständer, Drehplatform, Fotografie, manuell oder elektrisch mit Hintergrund Habe hier einen drehenden Teller für Fotografie oder 3D Scan gebaut. Der Hintergrund ist perfekt zum Fotografieren für Modelle. Passend dazu:…
I needed something quick and easy to create. There were numerous 608 Bearing turntables out there but none that fit my spool, most were too wobbly. I included Step files and a Link to ONSHAPE with parametric variables to drive dimensions…
I needed better case for my 77 mm ND filter, so I designed one. It is designed for cheap ND from ebay (which came with very bad case). My ND filter is 79.2 mm in diameter and 5.7 mm in height. I'm not sure if it will fit some other 77 mm…
Photogrammetry scanned bear that was initially carved out of red wood. Used Meshroom to compile the images of the bear. Print instructions Recommended to use supports for the nose. Will print without them but may be create spaghetti.
Red Dead Redemption 2 is one of my favourite games. I've made this model using Meshroom and in-game photo mode screenshots. You can watch the whole process here: https://www.youtube.com/watch?v=cCq9qCuH7FM Model processed in blender later…
This stand is mainly intended for top-down shots , like photographing documents, sheet music, manuscripts or book pages. You can use smartphone apps to take pictures without touching the shutter button—some even allow voice-activated…
About the Film Canister Holder: This is a simple remix of the base Gridfinity template adjusted to fit very precisely most common film photography canisters. Sizes: The hole is 32mm to best fits film canisters of 31mm of diameter (most of…
ATTENTION: CONTAINS ONLY THE TRIPOD MODEL; THE PHONE HOLDER HEAD IS EXCLUSIVE TO CLUB MEMBERS. Designed specifically for video and photography enthusiasts, this desktop tripod arm is both functional and stylish. Using 3D printing…
Foldable Pocket Reflector: Your Portable Photography Tool Product Description: Introducing the Foldable Pocket Reflector, the ultimate portable tool for photographers. This reflector folds down to fit conveniently in your pocket, making…
Hello, I have a Photo booth for model photography for you. Suitable for taking pictures of a model before displaying it in an e-shop or just on the net. You have 2 types from me, U and L. Both types have 2 sizes according to your needs.…
3D Print your Macro Photography In Brief This adaptor allows you to take macro photographs with Canon EF or EFS lenses. It was designed with kit zooms in mind. All examples use a kit 18-55mm kit zoom. Heavier lenses may need support. The…
A spiral sea shell I captured via photogrammetry. This was only my third attempt at photogrammetry and came out well. I have not printed it though prusa slicer accepts it. When it asks you to convert units for meters to mm accept the…
I created this slider for macro photography. It uses widely available 3D printing hardware for the most part, and it's fully open source! You can see the design workflow and the slider in action here: The best part of using a 2020…
Simple photo booth, brace rod connects between the two pieces with M4 screw. Category: Hobby
I wasn't sure if I should post this in everyday essentials. However, for some of us working in fields where we need to be able to share and pass around objects, be it for education, research, design, etc, having the ability to digitise…
Say Cheese! – Cute Squirrel Photographer 🐿📸 Meet your new favorite shelf buddy — an irresistibly chonky squirrel caught mid-click with its trusty camera in hand! Some supports are needed. I used organic-style supports, which peeled off…
👋 Introduction In Macro Photography, you rarely have enough light as you need to close the aperture very far in order to get enough depth of field. To counteract this, many photographers use a flash to illuminate their scenes.…
U can use a diameter of 10mm round rod or tube for fixation, Fixed round rod is not necessary, you can selectively print
Bahtinov mask designed for either a telescope or a camera lens. The main difference between this and other masks I've found is that this one is designed to work on either a normal camera lens or a telescope. That means allowing a very…
This was inspired by BrockLockers thing to help my wife with painting compositions. I found Brocklockers thing when printed not quite true in proportion to how I understand the Golden Ratio so I recreated my own in Fusion 360 (This may…
Hi there, here is a scale for photography it is not printed perfectly, but still better than a potatoe or banana. It is suppoesed to be 10 cm, I've measured 9.85 cm with my calipers. I would not use it for measurements, rather for giving…
Printing with PLA is recommended for optimal strength. No supports needed. I also suggest printing 2 or 3 pieces with variant colors for different chemical substances (developer, stop bath and fixer) to avoid mixing chemicals.
I designed this turntable for my son, as he wanted to display his toys and just play around with it. It could also be used for photography, preferably for products or as a 3D scanner. Although I've not used it for the latter. I made…
Small dovetail bar that can be inserted into common guide scope "shoes". Measurements in mm are shown in the attached screenshot. I used it to mount my OpenAstroGuider (see…
Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear…
In use you can hardly spot them:
Dirty simple adapter for action camera mount to standard photo thread. Thread is printable and may be a little tight but after first few attempts to thread it works smooth. Works great with mini tripods like manfrotto pixi.
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Make your own harmonic drive astrophotography mount. Achieve sub arc/second error rates for well under 500 USD. Unfortunately, projects like this need a large amount of bravery. I would rate this as 8 out of 10 difficulty. You have been…
Stable rotating platform if you need one Designed for 3 x 608 bearings as wheels for better smoothness, but you can use printed ones, they will be fine for this application. 10mm holes in the top plate if you need to print/design any…
Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side. Print vertically for extra strength around the clamping face, using 15% infill with PETG. Will work on tripod legs…
Since my original upload got a lot of downloads, I thought this is only complete if Columbo gets his dog as well. So here it is. Original sculptor is: Géza Dezső Fekete (1939-2021) If you like it, visit Budapest, and check out his life…
Designed to hold the ends of cardboard film boxes to show what is currently loaded in the camera. Was modelled with an XA2 in mind but should fit onto any camera with a flat or slightly curved back. Prints best face down with no supports…
A Simple target used for GCP (Ground control Point) photogrammetry purpose. The hole in the target center maybe used to place the Gps Rtk Trimble (or your..) center mast or to be fixed in the ground with a clamp. For Multifilaments…
A photography fan's best bookmark. Printed in Sunlu silver and Sunlu black PLA. Hope you like it!
This is a lamp cover, made entirely from 3d printed parts, that can hold four lithophane panes. The images can be easily swapped in and out of the lamp in a few seconds. The lamp cover has threads that can screw into the base of the lamp.…
3D Print your Macro Photography In Brief This adaptor allows you to take macro photographs with Canon EF or EFS lenses. It was designed with kit zooms in mind. All examples use a kit 18-55mm and 25:250 kit zoom. The Series The adaptor is…
After performing stop motion and building small gadgets, I wished to show these with an adequate background to bring professionalism. So, it seemed appropriate to design a display scene that looks good and had decent space. Printing For…
This is a manually operated macro rail to assist with precise image capture for focus stacking in macro photography. The winding mechanism has a metric thread with a 1 mm pitch, so a full turn of the knob advances the camera by exactly…
Thingiverse Link: https://www.thingiverse.com/thing:106568 Made By: HPaul (Thingiverse) Original Description: This stand provides a sweep, or curved, seamless background for photographing small to medium sized objects. It will hold…
Digital photography has become mainstream, and film cameras have declined. As a result, the used market is full of obsolete enlarger lenses. Enlarger lenses often have good performance. However, the lens mount for the enlarger is…
UPDATE: Placed all parts flat and in one file. *alligator clip not included First i need to say that the original design of the stage is made by Johan J.Ingles-Le Nobel and you can check the links below for more details:…
In a photography studio, erecting polyboards to bounce or absorb light is a common necessity. You can purchase large polyboards from warehouses, paint one side black, and create a versatile studio prop. However, setting up a 2.4x1.2m…
Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with ETH 0x90016b1b920bde45ea77839f9c0a7b2db05edadbc907e990bbcdc23f2ce1dd2d Support…
This 3D-printed mount is specifically designed to securely attach the MAGCUBIC HY320 projector to a standard photographic tripod. The mount features a custom-fit cradle that perfectly accommodates the dimensions of the HY320 model,…
An easy-to-print item that happens to be quite versatile in retracting the lips and cheeks for dental photography
A simple photography turntable plate that sits on a 140mm PC case fan. I used a Corsair A1425L12S case fan. Printed in PLA with 15% infill and 3 walls.
Dose zum schrauben für Fotofilter mit 58 mm Durchmesser. Die Dose hat innen einen Durchmesser von 64 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
The alligator clip adaptor fits Coder-tronc's fantastic Ball and Socket set . A set of arms and joints that enable flexible and secure placement. In addition, I've created a set of photography fixings that fit the same set 1/4 inch…
![Photographic Sweep Stand [By: HPaul]](https://media.printables.com/media/prints/327328/images/2818357_a8e205bb-ddb1-456e-8c4f-cfcb242d6e39/sweep_setup_preview_featured.jpg)
