Liczymy pasujące modele…
This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
clips on to my 2023 xsr700, i've included the fusion360 file, so you can adapt it
Futaba R7008SB receiver Holder Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 35% Filament: Tesla Filament PLA RED Category: 3D Printing
This does require supports.
Bleed funnel for newer Shimano brake leveler for use without adapter. Use the original washer. Should fit all M4 brake leveler: Dura Ace ST-R9120 / ST-R9170 Di2 Ultegra ST-R8020 / ST-R8070 Di2 105 ST-R7020 / ST-R7025 Category: Sport &…
Futaba R7014SB mount plate with 4 M3 bolts and a scotch to keep the receiver in place V2 has better scotch channel Use supports from build plate If you found this useful, please donate what you think it is worth to my paypal.me. Help…
TP-Link WR702N Wallmount in 2 Varianten: M4 Schrauben innen oder außen.
I didn't like the look of the skinny chrome forks. Yamaha designed a simple cover for the newer models which requires taking the forks out of the tripleclamp, something I didn't want to do. So I desinged them in two separate pieces to…
A 19" Rackmount for the TP-Link Omada ER707-M2 V1 The The screw and hex connectors is adapted from Mauker's systems Also included a blank panel if you dont need the keystone panel. Parts 3x M5 screws 3x M5 hex nuts happy printing. Thx…
The TP-Link ER707-M2 router is just slightly wider than a 10 inch rack slot. This design is one way to mount the router in a 10 inch rack with a serviceability trade-off. It takes an opening of 4U to insert/remove the router using about a…
Holder for Futaba R7008SB FASSTEST receiver.
This is the Base and spring for the shell of the above mentioned robotic mowers, since they are all the same with a different shell. The original Rubber Part gets brittle and rusty over time. The replacment part is 8€ *4 plus shipping,…
English below Nachdem ich frustriert war, wie teuer die Einbaudosen für Brüstungskanäle sind, habe ich meine eigenen designed. Diese hier sind für die BR 70 aus dem Bauhaus gedacht (Hersteller: Licatec). Den Bildern nach zu urteilen,…
I used the free SolidWorks demo time to remix this and adjusted the diameters of the central part that holds the spring and the two ears that stick out into the slots on the valve body and slot into the index point of the valve holder,…
Just a bracket to fix a TP-link mini Wifi AP / nanorouter (model TL-WR702N) on a wall.
VESA 100 mount for a Netgear R7000 router. Enables mounting router on back of LCD Monitor. Saves desk space. I swapped out the router middle antennae with an remote/extension wired antennae, so the middle antennae wasn't in the way of the…
A reciever mount for the R7008SB
Modeled in Fusion. Designed to be printed face down. Only difference between left and right files is the text, you can just print two of the same side and it will work so long as you don't mind the text being upside down on one.
An AR7000 Spektrum receiver will snuggly fit in this holder. There is also a backer plate and a snap on band. With the servo extensions attached the edges are held by the holder. I will post photos soon. I listed it as work in progress…
An accessories clip for the Buture JR700 cordless vacuum cleaner that attaches to the main pole. Can hold 2 accessories. Printed in PETG at 2.8 layer height with no issues with 0.4 nozzle. Adjust the Z height in your slicer if you would…
Als Basis dient dieses Model: https://www.printables.com/model/1331221-rotating-wheel-base-for-gardena-r40li-and-similar Hierfür habe ich ein schwenkbares Hinterrad konstruiert. Man benötigt vier Kugellager 608 (8x22x7mm). Für die…
Filament Rollen Halter für 2,5kg Rollen ( 100mm) ENDLICH EIN ABROLLER OHNE GEDRUCKTE ROLLEN !!!!! gedruckt mit 100% Füllung benutzte U Nut Rollen = 8x40x20,7 mm https://www.amazon.de/dp/B08TTDPZFS?psc=1&ref=ppx_yo2ov_dt_b_product_details…
Ein Ersatzdämpfer für Gardena Rasenmähroboter R40li, R70li und weitere Modelle. Wenn der Dämpfer zu weich ist meint der Mäher ständig irgendwo dagegen zu fahren. Wenn der Dämpfer zu starr ist, merkt der Mäher nicht mehr, wenn er anstößt.…
I had just created an Mountig-Plate for an Futaba R7018SB 18.Channel- Receiver for an Friend of mine. The Receiver will just Snap right in an will stay in Place. So the is no additional Tape or Vecro needed. The Mount is to be skewed with…
This is a model of one of the two different brackets. The other one I used was from here https://www.thingiverse.com/thing:5894963 . The handle uses two different brackets. I created this one.,
Das Magazin bietet Platz für 2 Wolfmesser, den Vorschneider, der Distanzring 15mm sowie 7 Wolfscheiben. Gemacht für einen R70 Fleischwolf, Unger-System. Optional kann es auf eine Bodenplatte geklebt werden, die perfekt in einen Lock&Lock…
A simple wall mount for the Woox R7051 Zigbee siren. For use with home automation software like Home Assistant. Prints solid, backside down. No supports. Is taped to wall with double-sided tape. Has holes for cables and buttons. If you…
I accidentally threw that part in the trash (I have no idea why). I threw away the barrel adjuster screw itself too, so after a long search, I found it on AliExpress. But I couldn't find just the plastic knob. The manufacturer themselves…
Simple Spacer for the NRG Style QR70 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
As posted on reddit Very basic model that I created in Prusaslicer. Please adjust the height to your preference. The front risers are 25mm eye to eye. The rear spacers are 40mm eye tot eye. I instructed the printer to print them one by…
For this project I used a mt3608 boost converter to boost the 5V from the USB-C power source to 7V. Assembly is pretty much straight forward. Print 1 bottom and 1 top half, then 2 contact holders of which 1 has to be mirrored. The…
Bottom is a little bit thicker than the original, so there are no supports needed. Printed without supports with 0,8mm nozzle. Material was Sunlu PETG.
Buture JR700 Accesories Holder
The case for the WSR703.org Altimeter Tester project. The project is described in detail at MacModeler.net and includes a video of its use. The Arduino code files for the electronics are at GitHub/memcbride The download includes the .stl…
[DE] Dieser Rahmen verbindet das NPR70-Modem von F4HDK mit einer geeigneten (von ihm empfohlenen) PA des Typs “Retevis RT91” bzw. VR-P25D (die PAs sind baugleich). Ziel war es, die Geräte als eine Einheit zu betrachten und zu nutzen um…
Battery slot cover for Canon Legria HF R706, when DC power supply is used. Fits other Canon camcorder models - with battery BP-727 / BP-709 / BP- 718
The Wixey WR700 digital readout for saw fence positioning uses a an extruded rail for sliding the readout. The ends of the rail are open, so this design is for left and right endcaps to give it a finished look. It can be just pushed into…
Needed a new ammo thing for my airsoft but didn't want to buy a new one. Part ammo goes to support is hard to remove You need the original nut and screw. Thingiverse: https://www.thingiverse.com/thing:6846204 Cults3D: Wait
adaptation de produit nicoll plus vendu
The venerable Netgear R7000 “Nighthawk” prosumer routers are a versatile piece of network gear, especially outfitted with DD-WRT, which is quite stable on that platform. My R7000 is no longer capable of doing what I need in wireless…
This is a model for the ASUS Hyperion GR701 case. I wanted a holder for my Thermalright 9.16 inch screen. I took the https://www.thingiverse.com/thing:7045125/files model and i revised it to hold my screen. I created 5 variations. Some…
Half-circle protractor, radius 70 mm: a tick every 1°, numbers every 10° in both directions and a centre hole. 140 × 78 × 2.4 mm Inner and outer scales (0-180 and 180-0) Ø1.5 centre hole How it was checked Checked with an overhang audit…
Fairing for an XSR900 mounted to a first gen XSR700. Amazon listing: https://www.amazon.com/Headlight-Windshield-2022-2025-Motorcycle-Windscreen/dp/B0G5YS6S37/ref=sr_1_4?sr=8-4 I recommend printing this in PETG or ASA. (I used ASA without…
Recommended settings: 6 wall loops 6 base/top layers 40% infill gyroid No support No brim/skirt Tray with base on build plate and front panel with front on build plate
This is shared for archival purposes. This was a one-off fabrication job from the previous owner of my friend's bike, which the welds failed, so I redid his design in 3D printed form. The wiring was already complete, so unfortunately, I…
Ein Ersatzdämpfer für Gardena Rasenmähroboter R40li, R70li und weitere Modelle. Wenn der Dämpfer zu weich ist meint der Mäher ständig irgendwo dagegen zu fahren. Wenn der Dämpfer zu starr ist, merkt der Mäher nicht mehr, wenn er anstößt.…
Als Basis dient dieses Model: https://www.printables.com/model/1331221-rotating-wheel-base-for-gardena-r40li-and-similar Hierfür habe ich ein schwenkbares Hinterrad konstruiert. Man benötigt vier Kugellager 608 (8x22x7mm). Für die…
These lug nut covers will fit on the Ford Transit AWD (not RWD), on Method MR701/MR703 wheels, with factory nuts. Very unlikely to fit other configurations. Friction keeps them in place nice and tight, no need for more (e.g. magnets).…
These lug nut covers will fit on the Ford Transit AWD (not RWD), on Method MR701/MR703 wheels, with factory nuts. Very unlikely to fit other configurations. Friction keeps them in place nice and tight, no need for more (e.g. magnets).…
