Liczymy pasujące modele…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
I was looking for a recirculating carbon filter for my Voron v0.2 printer but encountered some limitations with the Nevermore solution due to space constraints. Instead, I found the MFNano project by MappleLeafMakers, which seemed like a…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
AD5M Recirculating Air Duct - 5015 Fan This model is for adding a Recirculating Air Duct to the Flashforge Adventurer 5M (non-pro) to pull air through the HEPA filter and vent it back into the print chamber to maintain chamber…
This design allows you to add the recirculating duct found in the FlashForge Adventurer 5M Pro to the base model. This is probably only useful if you've already added the enclosure or are planning to as it just recirculates air inside of…
I designed this air scrubber to use a minimum of special parts. Build it today, no magnets, brass inserts, or high performance fans required! Read here about why you should have an air scrubber:…
This is the third version of the filtration system. Main changes: stronger blower fan (45.0CFM, 55.0mm2HO) larger filter volume filament and print time saver lighter easier installation Assembly instruction： Preparation One 12032 blower…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
This is an improved version of my earlier ball slide ( https://www.thingiverse.com/thing:943122 ). It also uses 6mm dia airsoft pellets as bearing balls, but it is lower-profile and runs a little more smoothly. Note that while it looks…
This project upgrades your Core One with an internal recirculating HEPA and activated carbon filter. This is achieved without major modifications to your machine, as the filter fits into the left rear corner and mount directly onto the…
This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…
Welcome to a few days of my life! V2 is now live with a more modular system! This is my version of a recirculating filter for the K series printers by Creality. This design was made to be modular, allowing you to use affordable HEPA…
This model is a recirculating carbon air filter design sized for use with a Flashforge Adventurer 5M with DIY enclosure. It uses two 5015 blowers. No hardware or supports needed for print. Fans are retained by printed pockets with posts…
My toolhead was crashing with the "blower plate". Fixed the issue by rescaling “blower plate” and “mounting flange”. You have to cut one corner off the "intake duct" to get the screw in. Youll notice while assembling.
I made this because the carbon pellets in the stock machine is too small for high VOC printing like with ABS, this recirculating vent holds a LOT of carbon pellets and a hepa filter as well as 4020 blower fans if you want. like the…
The idea behind this riser with recirculating exhaust is great. The front cutout for a glass prop is very smart, but the prop itself could use some improvement. And the exhaust runner doesn't fit on the Qidi Plus 4 build plate so it could…
20260121 UPDATE_1: The use of a klipper expander opens up new possibilities. Example: You can now also operate a 2-pin 6025 fan via the expander, so you don't need to use a special 4-pin fan if you choose this option. Please see:…
Follow the same instructions as the model the is remixed off of, and use the new double walled back plate that is posted here https://www.printables.com/model/1237621-draft-beta-double-walled-backplate-for-insulating
This model is a recirculating air filter using activated carbon pellets and two 5015 blowers. The screen components have honeycomb infill and were printed with only perimeter layers, no top or bottom layers. I built this for use within a…
20260121 UPDATE_2: The use of a klipper expander opens up new possibilities. Example: You can now also operate a 2-pin 6025 fan via the expander, so you don't need to use a special 4-pin fan if you choose this option. Please see:…
This is a recirculating air filtration system for the Prusa Core One printer. This system draws air into the filter from one of the Core One's enclosure fan openings, and exhausts it back into the enclosure through the other fan opening.…
Replacement Filter for Elica Recirculating Hood Carbon Filter. Can be opened again to replace carbon. No additional parts needed (except Carbon filling). First assembly may be a bit fiddly, but after screwing it back and forth a few times…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…
Welcome to a few days of my life! V2 is now live with a more modular system! This is my version of a recirculating filter for the K series printers by Creality. This design was made to be modular, allowing you to use affordable HEPA…
Made this for personal use, but figured I'd share. Provided step files so you can adjust it if you want. The recirculating exhaust port was originally found I think on Thingiverse, but the download was messed up so I fixed it and made it…
This spool holder is attached to the chassis of the MK3 prusa as the original. It keeps the plastic roll by preventing nodes from forming around the axis of the support. No need any ball bearing, the bearing is based on a 6mm soft ball…
THIS IS A WORK IN PROGRESS!!! I wanted to increase the cross section of the filter to: Add a second HEPA Slow down the velocity of the air returning to the print chamber Reduce back pressure against the fan. I'll be working on the lid…
Mounts to the top right side where the stock spool holder is, but on the inside. There is a spacer that you will need to print so that it sits flush. Use the 0.1A 24V 5015 fan for best result. Will need 40mm M4 bolts to mount to the side.…
This model I made to test out different 8-inch sluice mats in a controlled setting, the header box has a ¾ inch hole in it to fit aquarium tubing from an aquarium pump. I printed the model as the cut-up file shows and used a 0.35mm…
BOM: 2 x M3x20 screw 2 x M3x8 screw 2 x M3 Heat Inserts 2 x M3 3030 Drop-in T-Nut
