Liczymy pasujące modele…
This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…
Źródło oznaczyło ten model jako treść 18+.
EDIT 02-Sep-2025 : New revised motorized and furthermore engineered version published: https://www.printables.com/model/1398207-re-remodel-of-pastamatic-filament-spool-winder-for EDIT 20-Aug-2025: in a couple of days there will be a new…
I used blender to make the original model more like actual dogs (and especially my own). Smaller snout, less pronounced eyebrows, thinner paws and legs, more wavy hair on the back. That's most of the changes I made. I printed mine small…
Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…
V2: Remixed David's newer chain since I was having sag problems. Remodeled it and raised it up by 8mm. STL is already in correct print orientation.
IMPORTANT. Print using PETG and with TREE SUPPORTS so that the figure and the parts dont get shot down in flight by the government. (11/4/25 UPD: Thickened the arms and legs since it wouldn't load correctly in Orca Slicer.) (MEGA-UPDATE…
Both Rochas313 and Geometry John Doe Skins for the silly fans. :3 Print in PETG or get IMPLAED. Or tree'd idk. (MEGA-UPDATE 11/21/25: Added new joint design)
Note, I posted this on Thingiverse as a remix here: https://www.thingiverse.com/thing:5438660 but had a problem associating it with my list of account models there so I moved it to Printables. -- Remixed only from the OBJ files posted by…
Basic wing clamp for old work electrical boxes. Over time I've had a few of these break, so instead of replacing the entire box, just print a new clamp to hold it in place. I've printed them in PETG and they are strong enough to be used…
Presenting the rocket ship from Myst! Although I labeled this (for attribution purposes) as a remix of the rocket published by Cyan_Inc, I've actually remodeled it from scratch specifically for 3D printing. The rocket prints without…
This is another version of my old model but with better joints, and the model is updated, with the newest forsaken model of John
This is a merged ground plate model from models https://www.printables.com/model/417892-ender-3-s1-s1-pro-heating-bed-cable-chainholder-gu/files https://www.printables.com/model/502004-ender-3-s1-pro-heated-bed-cable-chain/files I have…
Original model wasn't showing as watertight and had lots of holes so if you have issues slicing that 3mf try this one. Recommend 3 or 4 for max stability but only 1 is modeled so replicate as necessary.
Thanks for the start, @Velocity_2177 ! I wanted to flex the PrusaXL and color my first model for 5 colors. The blue in the model is coded for PETG in the .3mf file as that's what I had on hand. I scraped the surface of the boot-up screen…
Skeletor's Havoc Staff from remixed parts from Thingiverse. Sources include: https://www.thingiverse.com/thing:473590 https://www.thingiverse.com/thing:4619647 https://www.thingiverse.com/thing:4962040 Uses 3/4" inch PVC pipe. I used nice…
length: 7.143 width: 11.870 height: 19.610 this is in inches. i remade the old giant lego because it didn't fit or there was an issue.
Fun little pug remodeled to be more flexible and easier to print multicolor. You can print it with any material. At 100% scale it takes around 40mins to print. For best results with multicolor I recommend splitting the mesh to parts in…
Remodeled tray with a solid bottom instead of modeled grids. Using slicer options to recreate the grid. Easier and faster printing. I have used PETG instead of ABS/ASA as recommended by the original author. I do see the sagging.
The original base for this model used the Nutella jar as a sweet container. Kilner jars(mason jar regular mouth) are obtainable in various sizes. I bought the small one from Sainsburys. I redrew the top half containing the thread in…
I love the Nutella Candy Dispenser but didnt have the correct glass jar so I made or adapted existing parts so that a 190g Douwe Egberts coffee jar could be used. This jar has a stopper design so I made it a push fit into the “coffee ad…
I found slider parts a bit loose and re-modeled those. Also I used 10mm magnets instead of author's 8mm
It is better to print it with structure
Instructions are on the original page!
20% infill, PLA is ok about 50C without problem, 0,4 mm nozzle
Good torso joint for 1/60 scale mechs. Print with PETG for best expirience. I recommend 0.4 nozzle with 0.12 layer for good fitting. With these settings fits tough and works properly.
Once I saw the lovely model for a key holder bird house, I knew I had to print one for good friends of mine who were about to move into their new home. However I was really unhappy with the visible screw holes, Thus I took a shot at a…
My timeless 1x1x1x1 model has by far received the most compliments out of all my models, so I figured all you awesome people out there deserve a remodel! this version has better articulation, better-hidden joint pieces, removable swords,…
Dispensing q-tips. Thanks to the originator “@Stadi” Support included, just break out after print. Printed in PLA or PETG. Lid snaps in. Logo is a three color print for a MMU or AMS. I printed on my MK4 with MMU3. Printed seamlessly.…
https://www.printables.com/model/517309-pirates-treasure-chest This is the original from muddymaker. What a great model! @muddymaker: THANK YOU VERY MUCH!!! I downloaded the model and created a further locking mechanism. By turning the…
Loved the design. Reworked the main body to make it easier to print and removed the internal overhangs. I included my fusion document if anyone wants to continue to improve the design.
This is a complete remodeling of the large combination lock by @EGauthierEAO. This version requires no bolts, but rather snaps together It scales nicely to 50% unlike the original Face plate uses sunk numerals for better print Requires no…
Remodeled the original to make it printable.
I have printed Ender 3 S1 Pro Heated Bed Cable Chain and after I have mounted Ender 3 S1 Squash Ball Feet the Ground Plate was too short. Now it's okay. Thanks to https://www.printables.com/de/@Bananenminist_401847 .
LR300 Grip Might not be the most accurate grip you could possibly get but it's free Version 2 Remodel - Grip has been remodeled to be more rounded and far less blocky, - Thinner than the V1, closer to being the real on hopefully
I cosmetically altered the original to my liking: https://makerworld.com/en/models/497751-t-15-tec-9-disc-shooter#profileId-481950 Please like and upload makes. Assembly takes 5 mins. Hardware: 3 rubber bands, M3X20-50 screw Features a…
I dont know what to put here execpt on why i need to remove this once eaadan starts selling print settings: support:tree angle: either 20 or 0 inffil: 100% for the rotors and housing everything else 50-20% Credits to u/WeirdcoreKing for…
A complete ground-up remodel of the legendary RS Watanabe 8-spoke wheels, specifically adapted for 1/10 scale RC drift and touring chassis. Instead of simply scaling down a 3D scan or mesh (which leads to paper-thin structures and…
This is a variation of OpenLock tiles but changed to fit in magnets instead. Magnet side used D3mm x 6mm
the side of the trigger had some proud faces around the hardware so I brought all of the side faces to the same level
as mentioned, I could not remix ‘ MINIMALIST WALL HOOK’ by MdeMAKER as it was not allowed I decided to make my own model with better tolerances. Feel free to give me any feedback and I will update the model!
Just made a new one with some better quad topo :) prints better
To fit JungleTim's version of 3D Printy's design
If you have a xd motor like me this is a remodeled one i kept these for my self but here you go STH-10 GE MOTOR COVER IS IN MY PROFILE
I created this model to use it for the creation of custom Toothbrush stations.
Two close friends had a travel themed wedding and asked me to 3D print centerpieces based on different countries that they had visited including Austria. Based on the scan of the front surface that usharingan uploaded to Thingiverse, I…
This is a variation of openlock tiles but changed to fit in magnets instead magnet side used D3mm x 6mm
Credits to @FanbloxCompany for the spined torso, head, and joint models. Credits to @YourLocalWalmart for the Script Builder John Doe corrupted spike arm. Also, don't judge the model, I am new to making these. Sorry, but the image is a…
Allows users with limited dexterity to cut their own nails. The original model is awesome and is designed for smaller nail clippers (approx 53mmx12mm). Creator was kind enough to provide the link to the OnShape model but alas not in my…
EN | Remodeling timetable This school schedule is 100% re-arrangeable, you can take the pieces out at any time and straighten them according to the new arrangement of timetable without having to cross out or erase anything. Instructions…
I would strongly advise to use supports for this case and outer/inner Brim, if its stands on the two sides were it connects with your new 3ds. You also have to put supports on the latch/locking tabs (see picture with blue circles). If you…
Hi, I was able to acquire a pair of old-but-gold Stax SR-5s. The only problem was that some parts were missing, and what was left was falling apart the plastic was cracking everywhere. But the driver and the "energizer" were working…
Cable organizer. Can be attached by screws or double sided tape.
PREVIEW PHOTOS ARE OUTDATED, FINAL MODEL WILL LOOK MORE ACCURATE. Yes, you read that right. 1/2 scale Model 7. Yes, 9 inch rotor version. Fully printable on a 256 printer. Will not work on a smaller printer, 256 is minimum requirement.…
This cube wired model is made to make the intersection visable to my pupils. You need to print 2 of the models. Perimeters: 3 shells Infill: 10% Cubical You also need 8 magnets with diameter 8mm and height 3mm.
some slight improvements, a small slot to fix a cable (with a knot) and sorta parametric design (only OD works)
X1/P1 Series Side Spool with remodelled Arm. Fitment is easy with either 3x spare nozzle screws or alternatively 3x M3x16mm Screws.
This is a remodel of the gooseneck, switch and rod for better fit.
Yes, you read that right. 1/2 scale Model 5. This is a 7.5 inch rotor. The C3 1/2 Model 7 is also available on my printables with a 9 inch rotor! Fully printable on a 256 printer. Will not work on a smaller printer, 256 is minimum…
I added his Tie and flattened the back so that it could be placed flat. Though it is not the same size as the.
I remodeled the popular NASA hex piece to greatly simplify the geometry. The original design was not mine, this was my inspired take created in blender. I have included a single instance plus a quad version to make it easier for…
Kia EV2 Cupholder Organizer — £1 Coin Slot Remix A revised version of the Kia EV2 Cupholder Organizer with three separate coin slots sized for UK £1 coins stored on edge. Changes in this remix: Coin slots enlarged to fit £1 coins…
a redesign of my previous build I did this cause I didn't like how the original turned out
1/2 scale Model 3. This is a 6.5 inch rotor. The C3 1/2 Model 7 is also available on my printables with a 9 inch rotor! The C2 1/2 is also available with a 7.5 inch rotor. Fully printable on a 220x220 printer. WILL NEED M3 SCREWS AND…
Lightning connector was too small so i made it bigger so its fits original apple lightning. Use the other parts from sdh
I was having trouble with the thread on the original model so I redid it in Fusion 360
I've been wanting to print the MHQ2 multi copter for a while now. My printer ( Prusa Air 2) and extruder set up only allow for a max build of X 191 & Y 195 and even the MHQ "short" version wouldn't fit on my build plate. So i have re…
The original is cool all I did was make it lighter by hollowing out the upper half.
Like many people, I don't solder that often so I don't have a dedicated space set-up for it. I liked the look and concept of the SF-001 but wanted to add a true H13 HEPA filter and carbon sheet to make sure what little soldering I do…
Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…
IMPORTANT. Print using PETG and TREE SUPPORTS so that the figure and the parts don't blow to bits. (11/4/25 UPD: Thickened the arms and legs since it wouldn't load correctly in Orca Slicer.) (MEGA-UPDATE 11/18/25: Added new joint designs,…
IMPORTANT. Print using PETG and with TREE SUPPORTS so that the figure and the parts dont swiss cheese themselves by accident. For the shoulders, make sure to insert the armor parts carefully onto the shoulder rod. (11/4/25 UPD: Thickened…
This is another version of my old model but with better joints, and the model is updated, with the newest forsaken model of John
I was having trouble with the thread on the original model so I redid it in Fusion 360
A remix of alpokemon's Nostromo Alien SpaceShip, available here , as the original STL was full of slicing errors which made the file unusable. I have fixed the main issue of the right engine being completely hollow in meshmixer by…
IMPORTANT. Print using PETG and TREE SUPPORTS so that the figure and the parts don't blow to bits. (11/4/25 UPD: Thickened the arms and legs since it wouldn't load correctly in Orca Slicer.) (MEGA-UPDATE 11/18/25: Added new joint designs,…
IMPORTANT. Print using PETG and with TREE SUPPORTS so that the figure and the parts dont swiss cheese themselves by accident. For the shoulders, make sure to insert the armor parts carefully onto the shoulder rod. (11/4/25 UPD: Thickened…
Stand for Colt 1911 (with Colt markings, check link Brendan Fezuk for files with other markings) but I took away the part where you put the separate cartridges, found it on thingiverse, not here. I dont know why the surface has these…
![[NEW] Forsaken Timeless 1x1x1x1 figure remodel](https://media.printables.com/media/prints/036d1e40-aa2d-4b1a-9852-c6b394ed3a45/images/12867540_635ccdaf-c5e9-4604-9cfe-f83b2ff30d6c_cb02c3b5-7a3d-49b9-8d68-ccb4a189e636/screenshot-2026-05-08-120339.png)
![LR300 Grip [V2 Remodel]](https://media.printables.com/media/prints/7f1634b6-0f23-4c5d-8dbf-686f1eaeab9a/images/10476375_e54e825c-a5e6-43a2-b01a-c2a5f7d204dd_f963070c-eaaa-44b6-add4-19b6ca83d0c4/lr300-grip.png)
