Liczymy pasujące modele…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
replique du ballon d'or football en 10 cm personnellement je l'ai print en 23
Wydruk około 11,05 €–13,51 € nettoWstępna wycena jednego wariantu
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Wydruk około 5,59 €–6,83 € nettoWstępna wycena jednego wariantu
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Wydruk około 7,37 €–9,00 € nettoWstępna wycena jednego wariantu
V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like. If you print this model, please post a make! Replica US Model 1918 Mk 1 Trench Knife. Based on the original patent…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
LATEST MODEL Since 2025-07-13 I recommend using this model instead: Ultimate Magnetic Bed Scraper With Replaceable Blades This is a spatula for removing objects from the print bed, with easily replaceable printable blades. When one side…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some users may find the +/- variants fit their machine's alignment marks and materials better than others. Luckily, these are quick to print and easy to swap out! I like to keep spares around as well. For ~$0.50 for a set of 2x5sizes, why…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
My daughter is a big fan of the Monster High dolls, and sometimes she manages to brake their legs, arms or hips. Daddy to the rescue to fix them :) This is a knee articulation replacement should fit all (?) with some preparations. Print…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Spare part for Shelly TRV. This part can be used in place of the original part, which can break if there is a collision with the TRV.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a work in progress release of my take on the short sword (dagger) Sting, from the Hobbit and Lord of the Rings. It's overall length is 560mm (22") with a blade of 380mm (15"). As of this release there are no elvish writing on…
Wydruk około 5,76 €–7,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Wydruk około 4,88 €–5,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallbar pull out frame For some reason I lost the pull out frame for my Hallbar 10L bin. This Frame is holding the bin bag in place. Ikea Germany don't have Replacements for lost Polypropylene Frames. So lets go and create a new one… It…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
Wydruk około 6,87 €–8,39 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
When using the original tools, I was bothered by the heating block's great freedom of movement and the tool's poor grip on the fan screws. After damaging the thermistor, I wanted to remedy the situation. I added material above and below…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement part for the board game trouble/frustration! I printed using 0.2mm layer height and stock PrusaSlicer PLA settings.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
A Filament Roll to replace a broken Filament Roll. Printed without top and bottom layers and honeycomb Infill will make this look gorgeous.
Wydruk około 3,98 €–4,87 € nettoWstępna wycena jednego wariantu
Just replacement of broken power button.
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I drew the top of the extruder fan for replace the old fan with a screw sopport broken. No supports are needed.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swiss Army Knife Replacement Toothpick for Large Pocket Knife. For Small Swiss Army knife replacement toothpick see: https://www.printables.com/model/321610-toothpick-replacement-for-small-swiss-army-knife…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in ABS with 100% infill
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two separate models that fit pretty well together. Posting them together in case anyone needs to replace both pieces. The drip tray is a low-profile version that allows for bigger cups.
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
I made this in Fusion 360 to fix the broken button on my Air Canada carry-on, and avoid having to buy a new one. Printed in PETG on Prusa mini, using supports underneath to print “upright” as it would be installed. I recommend printing…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Wydruk około 10,50 €–12,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a tiny stand inspired by those for test tubes that keeps the individual bottles safe and organised. I printed it with PLA at .15mm (quality) with 15% infill on a Prusa Mini but honestly you could go much less precise as it's not a…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
The combined power and volume switch of my Shokz OpenRun Pro 2 stopped working. First it lost its tactile click, then it ceased to function entirely. I assume the two little plastic plates beneath the rubber got dislodged. I carefully…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
scraper with replaceable blades with magnetic grip on metal surfaces and hexagonal design
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D Printed print bed scraper tools are great, they don't damage the print surface, are safer to use, and can be produced when needed! The drawbacks are that plastic blades are much less durable than metal ones, and printing a complete…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
Background As the uploaded pictures show, the knob on my OLFA model L-1 utility knife broke. Rather than throw the knife out, I opted to create a replacement part myself. This part is more interesting than it looks, it's doesn't just set…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!! Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Here is a bed scraper with a replaceable “Blade”
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Surface model of the T7 replisome complex as described in Gao et al., Science 10.1126/science.aav7003 (2019). All components were printed separately and glued. Proteins subunits were printed in PLA, while nucleic (DNA, RNA, and dTTP) in…
Wydruk około 2,88 €–3,53 € nettoWstępna wycena jednego wariantu
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This little cog from the Emsa Basic Salad Spinner seems to brake quite easily: … so I made this replacement part. Works well again, don't know yet how durable it will be… Printed in PETG, supports are needed like shown in the 3mf file.…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pouring resin and/or IPA back into the bottles is a clumsy mess (for me at least). These funnels screw onto the bottle and have a replaceable filter, making for a more stable target to pour into. Warning: If you change the parameters…
Wydruk około 4,39 €–5,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Project is still ongoing! At some point those flimsy Cardboard pieces will wear down or you already have lost them. In that case you can print replacements! Ill be updating the Collection over time. at the moment im testing and modeling…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
These plugs are designed to fill the screw holes of an RSL brand glass entry door. Many glass doors have screw holes for securing the inner and outer trim/frame around the glass pane. Here's the website for the door frame:…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
This is 1 side of Ethan A's Bull Elk Rack Antlers model. I have scaled it up and cut it into 3 pieces. As you can see in the picture, I printed one with Red, White, & Blue for the 4th of July. Each model uses pins to help reconstruct the…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands. Once, I broke one element by twisting the arm too much so maybe you did it too or will ;p Version Description Date A.1 Initial…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Because it broke and would break again, I designed this hitch raplacement eliminating further frustration. Trailer part in PLA surprisingly rigid even with the openings. more beefy grips firmly easy to use for the kids much freedom when…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[EN] Replacement of the inner part of the case buckle for Nikon Nivo 5.M/Focus6/Focus8/Trimble M3 total station. Tested on Nikon Nivo 5.M case only - see photos. The entire buckle including this inner part can be ordered at…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 17 Pro Replica sized as the original
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to fit a Jensen CS10 Powered Bookshelf Subwoofer cabinet, but easily scaled to fit other audio equipment. The original rubber leg had a steel washer to make the screw hole rigid, but I've been able to skip that piece. The screw…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
A replica from the coin of the german TV Show "Wer stiehlt mir die Show?", by ProSieben. Diameter of the coin: 150 mm Height of the coin: 10 mm Material: PLA (Copper) Print Time: 4h04min. (with 0,3 mm layer height)
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
Replacement for pedal top of a sewing machine. (Necchi 559). After the pedal fell off a table, the top part was broken. I designed a replacement part so the safe operation of the pedal was possible again. Material: PETG or PC (The used…
Wydruk około 8,62 €–10,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
Wydruk około 3,96 €–4,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple replacement lid for the KINGrinder manual coffee grinder (will fit models K0, K1, K2, K3, & K5). Useful if you have misplaced or broken the original lid, or if you would just like to customize your grinder with a different color…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Wydruk około 13,62 €–16,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another fireplace charger for smaller phones like the iPhone 8, second and third gen SE’s. Glue the surround to the hearth and the bricks together. Slide the mag charger into the dovetail into the hearth.
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use case In combination with easy-to-get and nicely prices suction cups, this part replaces the Garmin suction cup holder for their navigation devices with 17.3mm ball joint. The original Garmin suction cup holder is not great and falls…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Server rack screw and cage nut replacement. I remixed this to for 1.3U items that fit on a standard 19" server rack. This is just the 1.3U Mount you will need the nut from Spartan's Server Rack 1U and 2U Mounts (Screw and Cage Nut…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed it as follows: > 20% fill > Standard resolution 0.16 > 100% speed > PLA+ 220C, 66C bed These are knobs for my capacitor tuned crystal radio. https://www.thingiverse.com/thing:6191252 https://youtu.be/VJ80Nm9KSkE
Wydruk około 2,97 €–3,64 € nettoWstępna wycena jednego wariantu
The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: I bought water canisters from Campinggas a year ago. These had a tap at the base for drawing off water. However, this was never completely tight, so 1 year ago I designed a cap for this opening. (See…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Replacement for the battery cover at the back of my Fluke 17B. It's missing the direction markings for the batteries but it's pretty much impossible to put them in the wrong way anyway… The example was printed in Prusament Galaxy Black…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
![V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*](https://media.printables.com/media/prints/1063837/images/8051042_4dbcd059-28ff-4873-a9ae-ae9c975cb571_2dfe49e3-f5d3-408a-8202-62989a22972f/20241105_191539.jpg)
