Liczymy pasujące modele…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…
I didn't see any replacement parts for the MK3S on here so I decided to upload them for easy access. I didn't like having to go to the Main Prusa page to get these files individually so I put them all into their respective folders for…
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
I changed it a little. Added the hexagons for looks and a small chamfer around the model. Printed the brace with 30% infill. G-code is with standard Prusament 0.20 profile for PETG.
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
We purchased a secondhand Hi Ho! Cherry-O game... and the spinner was missing! This is the first model I have ever created– I used Fusion 360 and PrusaSlicer. Parts can be superglued together or pressure-fit– I recommend first gluing the…
Some users may find the +/- variants fit their machine's alignment marks and materials better than others. Luckily, these are quick to print and easy to swap out! I like to keep spares around as well. For ~$0.50 for a set of 2x5sizes, why…
Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…
This is a replacement connector for vertical roller blinds with a ball chain. Ball diameter: 4.5mm Ball distance (center-center): 6mm The pieces usually stick together well, but a small drop of super glue can be used if you want. If you…
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Update [2024-11-12]: Just to make clear, there are several versions to use according to printer capability: 0.20 clearance 0.35 clearance 0.50 clearance Original Also changed the position of the model, to half-open, so it is easier to…
After some time, my CAME TOP-432NA remote controllers started to fall apart. Since the electronics inside were fine I decided to 3d print a new housing for them. I made 2 versions because I had 2 versions of the controller mainly…
Replacementpart for PSU from Prusa MK4. If you want to place your PSU not on the foreseen place you can use these replacementpart. For example if you want to place your PSU outside of an enclosure. Recommend to Print in temperature…
A stiff brace replacement for black PSU of Prusa i3 mk3s. No additional fasteners but 2 hooks connects the brace to the top side of extrusion. It can be used together with my Squash ball feet for Prusa i3 mk3s (…
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Somehow we manage to lose one of these hinges, so there was either designing/printing a new one or buying the whole trashcan again. We opted to for the harder way :-) There is a left and right variant, so look at which one you have…
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
This model is a replacement casing for a USB-A SanDisk Ultra-Fit. This holds the tiny circuit board. The tight fit allows this case to be used without glue. The Fusion 360 parametric model is included if your printer requires different…
Hallbar pull out frame For some reason I lost the pull out frame for my Hallbar 10L bin. This Frame is holding the bin bag in place. Ikea Germany don't have Replacements for lost Polypropylene Frames. So lets go and create a new one… It…
As soon as I discovered the logo plate was removable from the new drawers I bought for my packout, I knew I needed to replace it with something. A couple hours later, I had everything I needed. The latches will probably break when being…
I have printed them with 100% infill. So far, they have proven to be surprisingly robust.
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
In case you broke your tokabo lamp I left you a replacement for the glass part. It will be necessary to remove the retaing tabs as you can see on the picture and the botom part it is holding in place with hot glue. I recomend supports to…
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
This is a replacement for the feed door on the back of the Bird Buddy Bird Feeder. This replacement features hooks on the sides that keep the door from falling open when refilling with seed. This model prints in 3 parts, one for each side…
It would be nice if you post your make. Thank you
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
When using the original tools, I was bothered by the heating block's great freedom of movement and the tool's poor grip on the fan screws. After damaging the thermistor, I wanted to remedy the situation. I added material above and below…
This is a replacement part for the board game trouble/frustration! I printed using 0.2mm layer height and stock PrusaSlicer PLA settings.
The clear plastic clip broke on my Wera Tool-Check PLUS (one of my favourite tools!) so I designed and printed a replacement part.
I am currently using this side mounted spool holder for my Qidi X-Max-3, but I wanted to take advantage of Vlad's non enclosed spool holder replacement but with an upgrade so that it uses bearings to allow the spool to rotate smoother. I…
We found this cool Grave Digger toy abandoned at the park with a broken off wheel so I took it home and got the tire off with a heatgun and did some measurements and research and found the linked model that was almost the right design to…
This jeans button works great. It holds even in a frayed hole, is very stable, and can also be removed again without destruction, for example, for washing. Especially when the original button of a pair of jeans is lost, the hole that…
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
I drew the top of the extruder fan for replace the old fan with a screw sopport broken. No supports are needed.
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
I have designed this to replace or enhance the looks of frames around wall sockets. This should be compatible with Gira's system 55. Suitability for any purpose is not guaranteed! Install at your own risk. As always, be very careful when…
We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…
Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…
This is a collection of 3d printable caps to replace the metal ones on a Canon New F1 WARNING: THE PLASTIC PARTS ARE FRAGILE, YOU NEED TO SCREW THEM IN GENTLY WITH THE LARGER TOOL YOU CAN FIT. Otherwise, you'll have to dig plastic out of…
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
I designed this particular clothespin as a replacement for one of ours that had worn out (the wooden part is exactly 73mm long, for reference). I was able to match the profile pretty much exactly and I was quite pleased about that. It's a…
One time use, e.g., you can put it together but you can't take it apart again, if you try and take it apart then it will brake.
This is replacement for plastic nut ( SOAP-NUT-GR ) of a kitchen soap dispenser ( SOAP-JAD-CPB ). The original part cracked and it is hard to buy the part outside of Poland. Printed part is probably compatible also with other McALPINE…
I frequently lose the movable part that enhances the grip on the tip of the Spring Clamp I use at home. This campaign motivated me to try printing replacement parts. ・I tried searching on Google Photos for the model number of this Spring…
A replacement fuse puller for storage in the engine bay with the spare fuses. Print instructions Unassociated tags: fuse puller Category: Hand Tools Print Settings Resolution: .1 Infill: 100% Notes: Small object, so shouldn't take long to…
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Update Versions - “No Magnet - 10mm magnet - 10mm magnet Version 2 - 12mm magnet” Holds the heat block in position vertically and horizontally - files (four versions) can be modified to allow for varying magnet sizes. Small magnets may…
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
You need for each arm 5 M4x14mm nuts. It is recommended to use supports on plate only.
Slightly inspired by this model (https://cults3d.com/en/3d-model/naughties/foreplay-dice), except when you try print text that is embosed to an angled side of the dodecahedron it looks like shit unless you make the dice really huge. Only…
A while ago, I lost the metal key to my Mercedes car key fob which is already a pain enough, but this meant I couldn’t clip it to my keys as the split ring attachment was on that key. As this was problematic, I needed to come up with a…
Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2 Print instructions Category: Electronics Summary Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2…
Printed in ABS with 100% infill
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
The injection molded plastic push button on the top of my SodaStream broke in half. I made this simple replacement (V2) as a temporary fix until I could buy a replacement button. I printed it with Translucent Blue PETG so it would be…
Is one half of the clothespin broken? Here's the other one. (72mm) Attention: There is the newer and more stable version 2.0. is now also down in the files. Print Settings: 0.15mm quality 70% infill gyroid no edge no supports item number:…
A piece for replace your lost tracks connector
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
3D printed tool to replace Honda Tool 07916 - KA50100 Used to remove and install the steering stem nut on 226 different Honda Motorcycles. The nut I designed this part around is P/N: 53229-MN1-650 You can check fitment by clicking here ,…
I just measured the damaged part of the set and put it into a model. I print the model laying down with supports, which in my experience easily break off. I increased the layers (top, bottom, perimeters) to 8 to get a solid model.
Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Remix of KIA car key remote replacement, added symbols to buttons. Added gcode is ready for 2 colours without MMU. Printed in PETG.
This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…
The story behind these sliding hooks/gliders (in Romanian: glisiere pentru călăreți agrafe de perdea) is born out of necessity and frustration. After several of my original curtain gliders broke, I embarked on a seemingly endless quest…
Introducing a robust 3D-printed cover for the Clemsa Mutan Mini remote! After breaking twice, this durable design offers a long-lasting solution. Perfect fit, easy to print, and adds a layer of protection to your remote. Ideal for…
I recently lost the wrench to tighten the different bits on my Dremel 4000. With this 3d part, I can get my machine working again.
We use a range of Ridgid powertools on the mine and the batteries get absolutely battered. Once the batteries clips and mounting plate are broken they are pretty much useless, I have spent many hours painstakingly reverse engineering the…
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Accessories: 1x M8 screw with cup head 100mm 1x M8 lock nut with nylon insert Print instructions Printable without supports. STL: https://www.myminifactory.com/object/3d-print-86835
The core for my standard 3M tape dispenser broke, so I figured I'd create my own replacement. Turns out it's a common enough problem that these things are sold on Amazon… go figure. =) Will need support during printing given it's design,…
Hey there! Here it is! This small Screw for Ikea furniture and other different wardrobes, which is so important to get funitureparts together. As you can see on the pictures i try to copy the design of the original Ikea Cam Screw.…
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
A replacement Ikea HASSJÖN compatible shower curtain ring to help complete your set in case you lose or damage one of your own. In the images with 2 rings mine is the one on the left and the one on the right is the Ikea ring. I printed on…
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Fresh, friction-reduced feet for your fancy Fractal Define 7 XL frame. Cooked these up after realizng that my new case and my carpeted floor didn't get along very well. With these feet bolted on the case stands a bit taller and slides…
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
