Liczymy pasujące modele…
This is a fast-to-print paper holder uses the gravity and a rolling gear to hold the paper in place. This is an addition to the existing Honeycomb storage wall and a remix of the Gravity Broom Holder (only for paper or similar). I…
The original design didn't fit my shelves, it was to loose. I redesigned it and reduce the radius of the curve in other to make it more tight.
Easy 10min Print NO SUPPORTS Containers From Amazon LINK⬇ TUZAZO 4 Oz Plastic Containers with Lids and Labels BPA Free, Clear Empty Refillable Round 4oz Plastic Jars with Lids for Cosmetics, Lotions, Body Butter, Slime & Beauty Products…
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Peça de substituição, batente fechadura de gaveta autocaravana Burstner que se estragou. Replacement part, Burstner motorhome drawer lock stop that was damaged.
Keychain with the Brotherhood of Nod symbol from the Command and Conquer games. Print the first half in red and the second half in black. I added a 3mf file with a material change.
A great Lamp. Print. Turn on LED Stripes. Infinite Cubes. Math.
For better audio quality, I purchased a Rhode VideoMic for my GoPro Hero 10 Media Mod. The audio is definitely better, but the microphone is always in the picture due to the wide angle of the GoPro. I found the design of @flazer where he…
This a model for the state flag of Rhode Island. No filament switcher is required for this model. Using manual layer change switching start with White, switch to Yellow at layer 16 then Blue at 19 (for 0.2mm layer height). See the…
An easily removable universal musicstand beerholder. Works with multiple music and tablet stands Part 2 can be attached to the standard with a cable tie (Mount with arrows pointing up) Part 1 slides on part 2
Hauptcharakter aus dem Videospiel Splatterhouse
This model is fully print-in-place and does not require assembly. This is a great model to test your clearances, bed adhesion, and overhangs. The clearances are 0.3 mms on both models. If you'd like to see more of my designs , check my…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
A simple low-poly design of a rhombus structure pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
This model started as a heavy remix from rowiac on thingiverse, then I made the skeleton printable for 3D and added the barding and other details. Original file located here: https://www.thingiverse.com/thing:4646612
I designed this, because I really wanted one, but only had a small printer. (150x150x150) So I cut it into smaller pieces, and gave it a go! I used Acrylic brown paint, with a black wash. I think it turned out pretty Good!!
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Decorate the frames of your doors
When I am running, sometimes my AirPods Pro are falling, so I have designed this ear holder. I have added 7 different sizes. Print it with support (for the arm) in some flex materials like TPU. You can print in PLA or PETG but it is less…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a redesign of the original Gjallarhorn uploaded here. With this redesign it prints faster and is much sturdier. Some elements were taken from the original gjallarhorn to help me make it faster. This uses a 75mm / 2 ½ inches PVC…
I saw a wooden version of this floating around instagram - a puzzle made of rhombuses, which when combined can fit into the hexagonal base. There are apparently, multiple solutions where all the rhombii will fit within the base, but only…
I recently uploaded a version of this, that was sliced into 3 pieces, and I got some requests to make an unsliced version, so here we are! Thanks everyone for your kind words and feedback! *please note, that the photos are from a sliced…
I used support for the helmet and chest armor
TinyMtn Free Pack 14 - Alps This is a package with sets of 3D model files for four iconic mountains in the Alps. Mont Blanc, 4810 m / 15,781 ft Eiger, Jungfrau, Mönch, 4158 m / 13,642 ft Matterhorn, 4478 m / 14,692 ft Monte Rosa, 4634 m /…
You may subtract a part of the sphere with negative volume in Slicer and sit it on any lightbulb as a lampshade. For impressive shadow projection make sure your light is as small as possible. Avoid diffuse bulbs, better go for pointlight…
The door holders wear out over time to the point of being non-functional, so I constructed more robust ones in the same dimensions: The upper part (female) measures 98 x 22 and has a hole spacing of 78mm. The two lower parts (male) have…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
English: This door hook is a remix. Well, more or less. I rebuilt it from scratch in Onshape, and instead of the original file of 13.5 mm, I integrated a distance of 14.5 mm, because our doors are a bit wider. This stable door hook can be…
Some time ago, I noticed that the remains of last year's rhododendron flowers are looking quite strange through a macro lens. That is what this plant is based on. I proudly present to you: The Rhododendron Nostril Plant These are big…
A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…
This is a vase designed out of pure Golden Rhombi discovered by Stanko Bilinski. I remixed this vase from: http://demonstrations.wolfram.com/OctahedralVase/
After numerous visits to campsites I decided to design and print a suitable water filling system that allowed easy water filling at the camp water points. The design includes capability to fill from hose connection or water containers via…
Gridfinity holder for sandpaper for an orbital sander (⌀: 125mm)
Print laying flat For best look use the filament change function in the slicer to make the logo dual color I changed the bridge angle in the advanced settings to 45°
This model prints flat, then folds along the edges to form a rhombic dodecahedron. The inner sides snap together, as shown in the video below, to hold the shape without additional connectors. If you change filament mid-print, you will…
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open! I rounded the edge at the end of the mounting holes to make it more stable. I have also added additional straight…
This is a reupload of a model I found on Thingiverse. All credit goes to the original poster as well as the artists over at Bethesda.
This is a variation of The Rhododendron Nostril Plant which I published before this one. It features some flower-like thingies instead of the thorns. I guess, it really depends on the paint job if this one is dangerous, beautiful - or…
3D Model of the Matterhorn (Mountain in Switzerland). The model is based on Google Maps Data.
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
There are many Rhombic Dodecahedron models but this one is mine. Onshape model here - https://cad.onshape.com/documents/93ba8776109c61d7d17b3a96/w/c3fbc13e38bff88b61c2eff1/e/1e6ad75df001c75085a09624 The STL file is a 25mm Rhombic…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🎉 Hey Adventurer! 🐉⚔🧙♂ If you love this 3D model – you're just scratching the surface! 🌟 🔥 The full collection from this series (and tons more!) is waiting for you over on my Patreon :…
If you want to support my work, you can buy me a coffee . Also check out my other models .
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
This is a reproduction of "The Dana Set of Wooden Crystal Models" originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). triclinic monoclinic orthorhombic hexagonal/trigonal tetragonal cubic I recreated the models based…
I bought something similar and loved it, but it broke quickly. I redesigned it and printed it in PLA, but would recommend PETG.
You may encounter leaks. To prevent it from happening, place two silicone or rubber o-rings on both ends and also some teflon tape on the outer threads. This will seal the potential leaks. This adaper is to allow you to connect a…
The previously shared Portable Air Horn produces a monotonous sound. By using a larger or smaller horn, the pitch can be slightly changed. By moving the hand/finger in the opening you can also change the pitch. But since your hand is in…
Section of the Matterhorn according to swisstopo data
This type of component is used to stake down tent doors on certain types of tents. Usually the part consists of a small anchor type hook and a line tensioner sewn together via a small webbing strap. With 3D- Printing this can be rolled…
This is a model of the Boeing F/A-18 Superhornet jet, feel free to share this with your friends!
Approximate size of this design is: 120mm x 120mm x 120mm. The time to print and fully assemble is approximately 6 hours. Gears and core may be printed in any material. Clips were designed to be printed in PETG. Once the clips are…
cone for electroculture spirals to be used with 3 mm 3.5 mm aluminum wire. The spiral (half or full return) is recommended with 7 (14 if double) turns from left to right or with anti-clockwise winding (right-handed) under penalty of…
This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…
Screwdriverholder for Gridfinity. Holds 2 medium sized screwdrivers
Rhode Island, USA (RI) Topographic Relief Map with Rivers and Coastal Waters Rhode Island, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
While designed to solve the problem of having no cup holders in my Motor Home this cupholder could be used in many places/vehicles. It hangs on door pockets, dividers, dashboard etc. Best printed in PETG for strength but also fine in a…
English (Deutsch weiter unten) A fan that fits into the Dometic Mini-Heki (40x40xm). Inside width: 382mm. Printing: Print in ASA or ABS only, for temperature stability. Required parts: 2x Corsair RS140 MAX 140mm ( Link ) 1x PWM Fan…
F/A-18E/F Super Hornet entered fleet service in 1999, as the replacement for the F-14 Tomcat. The Super Hornet is the second major model upgrade since the inception of the F/A-18 aircraft program highly capable across the full mission…
Repair part for the popular Hartal waste bins fitted to caravans, motorhomes and camper vans. My waste bin broke after only months of use, rather than buy a new bin which would probably break again I decided to design and print this…
The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…
Matterhorn, one of the most spectacular mountain in the world. Build its model in your sandbox. Whether just for fun and play or for educational reasons. Learning about geography will be more fun for children. Model your own Alps in the…
Modeled after a 1977 Rhodes Mark 1 Stage 73 Piano hammer. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Infill: 100 Category: Music
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Powerhouse Dual Fuel Lantern Travel Case. Hardware…
Mit diesem Anschlag könnt ihr wiederholgenau schmale Leisten auf eurer Tischkreissäge sägen. Ausgelegt ist er für eine Bosch GTS10, könnte aber auch auf anderen Tischkreissägen passen. Ich habe den Anschlag mit FreeCAD gezeichnet, die…
Color order: White, Black Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing…
Save your GPU and mount the adapter to your Valve Index. I made one model with tread inserts and one with nutpockets so you can choose the one you prefer. Printed with Prusament PETG 0,30 mm draft. Hope you like it.
There was 7 wonder in the ancient world. One of them is the Colossus of Rhodes. It stood in the city, and build for the sungood, Apollo, after the failed siege of Demetrios Poliekretes. This is a modern reproduction of it, made for…
Rhombelle is a compact cotton pad and swab organizer for your vanity, dressing table or cosmetics shelf. A recessed diamond pattern meets a smooth surface along one continuous diagonal. The rounded body and clean edges give the design a…
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
Keder hook for Awning, e.g., on a motorhome Haken für Kederschiene, z.B. Wohnmobil PETG is recommanded
Customizable tube with rhombus holes. You can configure length, diameter of the tube and the number and size of the rhombus holes in OpenSCAD .
Just a simple filter holder to suit your moccamaster. .stp file included Print Settings Printer: Tevo Tarrantula Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: Kitchen & Dining
This adapter is used to connect a Motorhome 40mm outlet to a corrugated pipe to release grey water waste. This is needed when no drive over drain exists at a campsite. Designed in Fusion 360 file included should you wish to change the…
This is a part of our Grimworld: Battle for Underholme project! Join the fight on the side of one of the mighty dwarf armies. More information on our website - sign up to get 2 additional models! Subscribe to the pre-launch page on…
A remix of the honeycomb paperholder with a simple Skadis hook to hang your gravity paperholder on your Ikea pegboard.
Holder for a bottle of beer. Can be attached to the wall with 4 screws. Has held up on my wooden wall for several years. Halter für eine Flasche Bier. Kann mit 4 Schrauben an der Wand befestigt werden. Hält bei mir seit mehreren Jahren an…
Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron Truncated Cuboctahedron Truncated Icosahedron Truncated Dodecahedron Rhombicosidodecahedron Snub…
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 1 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
I took over this rudder horn from the Multiplex Indoor Extra, because I was very happy with it. Before printing you have to enlarge the part by 100 times. I hope you enjoy building :) Print instructions Unassociated tags: rudder horn…
Adorno Navidad Rombos / Chistmas Ornament Rhombus
This is the UnderHook! A multi-hook system that sits under your kitchen cabinet and holds mitts, towels, oven gloves and whathever you want to hang, and keep everything in order. The print is straightforward (just lay it flat, slice and…
Matterhorn mountain no surprises. Fully manifold too!
This model features a Level 3 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra. Looks pretty trippy and prints great with no supports! 😁 I've included a 3MF that will produce the print shown in the photos. Here are the…
This is my modified housing for the filament sensor on the Orbiter 2.0. I added an ECAS fitting and compared to the original, I only used an Omron D2F microswitch with a ball. There are two variants, for 5mm and 5.5mm. Print 0.2mm layer,…
External housing to convert an internal 12v socket to an external power outlet. Fits both external and internal cable management. Best printed in ABS or PETG to coupe with the varm enviroment in the camper. I have been using a socket from…
This easy to print model fits together nicely and is robust enough to handle the play of my 2-year old daughter who now knows the Neighborhood Trolley from watching the animated version of my old childhood show.
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open!
This a tile holder for Assasin's Creed: Brotherhood of Venice. You can place the roof tiles on it to create a better view of the game. 2020-10-03 Test print came out a bit too small, adjusted it so all sides measure 100x100 mm. Also…
Best printed in a resinprinter, or in av FFF-printer with PETG.
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
Hornet from: http://logic-wizard.art.coocan.jp/fms_e.htm Remixed Superhornet Hint: Scale it to 0.66 if you like (in your Slicer) to cut down your printtime (not less) https://en.wikipedia.org/wiki/Boeing_F/A-18E/F_Super_Hornet source for…
I made this model while exploring fractal geometry using CAD software. Because of the complexity, slicing can take a while and you’ll want a decent PC to handle it smoothly. The print itself is also a long one. The example print shown…
This one is works after printing! The original remixed model had separate ear blades that fit into the head, but the earholes where the earblades were supposed to fit were partially blocked off. (Of course, I figured this out after…
Print in single color or AMS 2 color. Designed to fit the 6mm rings on keychains. From the Fallout video game faction. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
