Liczymy pasujące modele…
I designed this wall mount for a Fritz!Box 5690 Pro using Tinkercad. I printed the model in PLA without supports (5 walls, 25% infill). However, I recommend using PETG or ASA if available. Note that the STL file needs to be mirrored for…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
simple leg to place the FRITZ!Box 7590 in an upright position. Print instructions You need to print two pieces. Update Added a version with legs approx. 14 mm longer for better clearance with thicker cables.
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
This wall mount for the FRITZ!Box 5690 Pro is a refined remix designed with enhanced stability and ease of installation in mind. Unlike the original, this model includes a connecting center section to keep the brackets perfectly aligned,…
My good old lawn mower (push-mower BRILL RazorCut Premium 38) didn't work any more properly, because one of the gear pinions (Sperrritzel) was a bit worn and the wheel didn't drive the spindel reliable any more - it stopped every now and…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
I needed a mount for my AVM FRITZ! WLAN Mesh Repeater 3000 . Dont wanted to stand on the floor. With this you can mount it on the Wall or even Ceiling. This works also for the 6000 Version
Der Wandhalter dient zum aufhängen einer FRITZ!Box 7530 AX. Am Rahmen sind kleine Laschen, mit denen man die Kabel mithilfe eines Kabelbinders aufhängen kann.
Wallmount for AVM FritzBox Router with cable management 7590 7590 AX 6660 Cable 7530 5530 8850 6850 6660 6890... It keeps the Fritzbox cool and ensures better WLAN Performance due to fewer reflections from the wall. Affiliate Links for…
Replica of the original Aperol Spritz illuminated retro sign, about half the size. Printed all the letters separately (top and bottom part), in orange PLA. The letters can be screwed onto the back plate with M3 screws. I split the sticks…
I remixed a Fritz!Box stand for the 7590. Made it higher so the connectors fit underneath. Also added a second version where the Fritz!Box is leaning a little bit backwards. Remixed from this:…
Wandhalterung mit Kabelzuführung von Unten und guter Belüftung der Fritzbox. Gedruckt mit 65% Infill in ABS. Stützen aktviert um die “Nasen” der Halterung sauber zu drucken.
Support to put the AVM FRITZ!box 7530 and 7530 AX in a vertical position. You need to print 2 pieces. I also uploaded the .STEP file of someone wants to make some modifications. PS: from the comments, it also works for the 7230 and 5530…
Hope you enjoy! Will be building myself soon!
Vertical stand for the Fritz!Box 6660 cable. Inspired by https://www.printables.com/model/43735-fritzbox-7590-stand If you have a different model check if it has the same housing. The diameter should be around 54.5mm
Hallo, darf ich vorstellen, das ist Fritz Frosti . Fritz Frosti möchte euch Spass und Freude bringen. Er bringt auch noch seinen Tannenbaum mit. Je mehr Brüder er bekommt, desto glücklicher wird er. Spielt mit ihm, tut ihn in den…
English I created a simple wall mount for the Fritz!Box 4060, this uses the original mounting points of the box. If you like the design, feel free to buy me a beer ;-) Versions There are 2 different versions, a smaller version and a…
Mein erster Entwurf zur Wandmontage meines Fritz! Repeater 3000. Category: Other
Printing work with supports use a lot of cooling!
Use these brackets to mount the Fritz!Box 5690 Pro to a wall, shelf or cupboard with screws or power strips. The existing model has been optimized as follows: Slopes were added to enable printing on the side without support, reducing the…
Stand for the AVM FRITZ!Repeater 1200 (AX). An Europlug extension cord is needed to fix the repeater to the stand. Make sure the extension cord fits the cutout on the back as they differ in size and shape. I've used this one from REV…
Rackmount für die FritzBox 7590 im 19 Zoll Serverschrank. Dabei können die Anschlüsse der FritzBox über bis zu sechs Keystone Adapter nach vorn herausgeführt werden. Folgendes wird zur Montage der beiden Teile benötigt: 8x…
Hey guys i'd like to share my recent bigger project with you, my 10 inch Network Rack. I was always disappointed when i saw all the mess and not really organized cabling and setup of my network devices at home. Inspired by another 10inch…
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
With this Decorating Tip / Spout you are able to decorate your cakes and cupcakes. The diameter is about 10mm.
This a simple holder for the AVM FRITZ!Box router designed for the IKEA SKADIS pegboard. It perfectly fits the mounting holes on the back of the router so it can easily be put into position. As far as I know, all the currently available…
Spritzschutz für den Thermomix TM5 oder TM6. Kann als Alternative zum Garkörbchen verwendet werden. Sollte in einem hitzebeständigen / lebensmittelechten Material (z.B. PETG) gedruckt werden. Ich habe den Spritzschutz mit 80% Füllung…
Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…
Ceiling and wall mount for the Fritz! 3000AX Repeater. The 3000AX Repeater is slightly brighter than the non-AX version. update 12.10.2023: added different sizes, for wall mount better use 15mm or 20mm variant.
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
This is an stand for Fritzbox! 7590 (don't fit to 7590ax) it provides the folloging features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should…
Beim Saugen im Haushalt und besonders beim Auto stößt man immer wieder auf Ritzen, die zwar voll von Dreck sind, aber auch so schmal sind, dass die üblichen Staubsaugerdüsen nichts nutzen. Hierzu habe ich diese Düsen konstruiert und mit…
For the Fritzbox 4060 router to attach it to the wall. I did it relatively precisely and the bracket clamped over the feet below
Mounting solution for the FRITZ!Box 7530 with additional space for cable management solutions.
I've always been looking for an affordable spray shield for my garden sprayer, which I can mount without changing the nozzle. Eventually I created my own. It's primarily designed for the Gloria pressure sprayers, but might fit other…
Extension for the rear fender of the Apollo City / Trittbrett Fritz E-Scooter. Protects the rear suspension from getting dirty. Printed in whatever you like, add supports. See Pictures for print orientation! German Community Thread:…
In-Place Upgrade for the front fender of the Apollo City / Trittbrett Fritz E-Scooter. Protects the front suspension from getting dirty. Printed in PLA, No supports, add brim. German Community Thread:…
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
für das Fritz!Dect 440 Modul. Einfach Reinstecken, hinstellen und fertig... Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports: Yes Resolution: Infill: 20% Filament: Sunlu PLA+ weiss Custom Section no Category:…
10" inch Mount for your FritzBox 7530 AX in a 10 inch network cabinet. Nozzle: 0.6 mm Print Settings Printer: UT5050 Rafts: Yes Supports: No Resolution: 0.4 Infill: 12 Filament: M4P PLA natur PLA natur Category: Other
Summary This is the one-size-fits-all repeater stand for all the wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a Euro plug extension cable. Compatibility list - all wall plugged AVM Fritz!Repeater (article…
“Geld-Spritze” als originelle Verpackung für Geldgeschenke. Einen (oder mehrere) Geldschein(e) zusammenrollen und in den aufgeschraubten Spritzenkörper einschieben. Spitze wieder aufschrauben - fertig… Montage: Der “Druecker” wir von…
This is a replacement Battery Cover for the FRITZ!Fon MTF. You definitely need to enable supports for Printing.
Printed from one piece and 18mm shorter
Spritzenhalter für 20/10/5ml Spritze
Quick remix to install it onto a 34 mm / 32.5 mm valve. Includes the adapter extension pin.
Please see below for English version ----------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- Edit 09/2024: Auf…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Wall Mount for Fritzbox different Models.
Seriously, I only needed the stand to place the Fritzbox 6670 vertically in the cabinet due to lack of space. The model should also work for the Fritzbox 6660.
This is a 3D printable vertical stand designed for the FRITZ!Box 7530 and 7530 AX routers. It allows you to place the router vertically on either side , depending on your setup needs, improving both space efficiency and ventilation. ✅…
Wallmount for fritz repeater
Printed the letters A,L and Z seperatly and PE, RO, SP and RiT already together. I have glued them together with “Rovell Contacta Professional”. The letters fitted really nice nearly without gaps. I used clamps to hold them together…
Resized 1U Rackmount 19" for the FritzBox! 7590AX. Keystones on the right side
A simple tray for weighting coffee beans. Optimized for 18g of beans: no overlap when leveled, which is ideal for “spritzing” them with water before pouring them in the grinder. Optimized for a 0.4 nozzle.
Hallo Zusammen, ich möchte hier einen Spitzschutz für die Teleskopgabel des Elektrorollers Silence S01 (baugleich: Seat Mo 125) vorstellen. Dieser wird mit drei Kabelbindern von unten an der Gabelbrücke der Teleskopgabel befestigt. Auf…
Rieju mrt 50 ritsel abdeckung
My router sits right above a cable gland and all the network stuff is on the other side of the wall. To hide the cable gland and the cables i designed this cover, which fits between the round things on the 7590 but doesn´t cover the…
Spare gasket for Bestway Lay Z Spa screwed air connection. It fits on Lay Z Spa "St. Moritz". Pump: Bestway Model: S100101 I don´t know, if it fits on other pumps.
This minimalistic vertical stand lets the FRITZ!Box 6660 cable modem stand fully upright like a skyscraper, instead of the long edge up like the other models I could find. This stand will friction fit around the modem and provide a flat…
This is a 19" rack mounting bracket for 7490 style FRITZ!Box internet routers including mounts for a 5 port PoE Switch by TP-Link and 3 slots for russrosss awesome raspberry pi mount. I have also included the Freecad file so you can…
The AVM Repeater is designed to be plugged directly into an electrical outlet, but I preferred to attach it to a wall and connect it with a power cord. That's why I designed an alternate back cover. Similar to the original, this back…
ABS no supports. Printed in the same way as it is fixed to the wall.
Habe eine einfache Wand / unterm Tischhalterung für eine FritzBox 5530 (Fiber)/7530 AX gebaut. Sie wird einfach nur mit 4 schrauben befestigt. Es gibt keine besonderen Druckeinstellung. Drucker : Prusa MK4s Filament : Prusa Galaxy Balck…
English This is a specially designed mount for securely and space-efficiently installing the Fritz!Box 7590 AX (V1) in a 10" server rack. It is ideal for use in IT environments where organized and tidy storage of networking equipment is…
Cooling Base for your AVM FRITZ!Box 7530 (AX) Got a spare PC case fan you aren't using? Print this cooling base for your router! Two variants for use with 120mm and 140mm case fans available. Print the optional standoff feet, when using…
This is my version for a mount for AVM FritzBoxes. It should fit the following devices: 7490, 7590, 3490, 6490, 6890, 5491, 5490. I have a 7490 and it fits perfectly. I made sure to use as little material as possible. The holder fits very…
A quick'n'dirty remix of a FritzBox Wallmount with flat backplate for double sided gluetape
Printed at 50% infill in Prusament PETG Galaxy Black. I cut it in 2 pieces in the slicer to fit the bed and will probably glue the top on. Or not. We will see. It will print without supports if you dont mind minor cosmetics on the…
Ständer für die Fritzbox 5530 leicht zu drucken
The stand for the switch and display Fritz!DECT 440 by avm is shown in photo No. 1. Simply place the display on the stand and you are done! The display resting on the stand is shown in photo No. 2. The stand may optionally be used with…
Hallo, habe im Internet so ein AVM Fritzbox Rackmount gesehen gehabt und fand das ganz cool also eben selbst eines gezeichnet. Habe auch für einen gekauften Fachboden, nur die Keystone Halter mit hochgeladen, und eine Kappe um die Löcher…
This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the wall by two screws. For the new Fritz!Box 7590 I didn't want to drill new holes, so I decided to make an adapter plate…
Meine neue Fritz!Box hat bei Wandmontage die Kabelanschlüsse unten. Das paßt mir nicht und deshalb habe ich eine Wandhalterung mit FreeCAD 1.0 entworfen und mit ORCA gedruckt. Nun muß das Ding nur noch an die Wand und das…
Allows the Fritzbox 7490 to be mounted under an desk. Easy print
My DECT phone, a Fritz!Fon C4 from the Berlin company AVM, had the front housing broken in several places. In further use, then also the speaker failed and you could only call through the speaker for hands-free, which is located on the…
Sep 02, 2021 This is a mounting plate / wall bracket for the Fritzbox 7360, 7430 and identical models with a mounting hole spacing of ~178mm. After fixing the mounting plate to the wall, the Fritzbox can simply be hooked in. The side…
A quick stand I made to be able to set my router up vertically so it takes up less space and hide the cables. Added some decoration for fun. I also included a blank model without the cutouts to fit this specific model so you can remix it…
Meine Frau bat mich ihr einen Ständer anzufertigen, damit sie ohne Hektik und ohne dass ihr jemand helfen muss, den Spritzbeutel befüllen kann. Auch ein verschmutzen der Arbeitsplatte, durch auslaufen des Spritzbeutels, wird dadurch…
This is my Fritzbox 5530 Wallmount with a little dust shield. In addition you need two M4 inserts and two M4*12 screws (maybe some Loctite).
Stand for older FRITZ!Box Router (WLAN 7360 in the picture), to place the router vertically on a table.
printed with support.
Gotta love it when a plan comes together. Printed in polymaker ASA, .6 nozzle as that is what I was using at the time. Holds up well, bends and adapts to the bottle without issue. Using a 16oz spray bottle.
Ein Behälter für Nähreste für eine Gritzner 788 Overlockmaschine. Jedoch 20 mm breiter als der originale! Die angebrachten support Stützen kann man schön mit einem Seitenschneider entfernen. A container for sewing waste for a Gritzner 788…
Fritz Repeater 3000 AX wall mount For four 4 mm screws Screw distance 60 mm
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Fritz!Fon C6 Wandhalterung, sehr stabil. Die Ladeschale des Telefons kann nicht nach vorne raus kippen.
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
A quick-to-print bracket for attaching the Fritz!Box 7490 router to the IKEA Skadis. Printed with PLA 0.2mm layer height and with supports. Pay attention to the alignment of the model, the flattened holding arm should be on the print bed.…
English: This 3D model represents a life-sized Haribo licorice snail designed specifically for 3D printing as a keychain using PLA material. Design Features: Shape and Color: The model faithfully reproduces the shape and color of a real…
Mit dem Halter kann man die Ladeschale des Fritz!Fon C4 an der Wand befestigen. Ich habe sie mit doppelseitigem Klebeband an unsere Fliesen in der Küche geklebt, es sind aber auch 2 Bohrungen vorhanden um sie anzuschrauben. Die…
This is a 10 inch mount that fits a fritz!box 7530, fritz!box 7530 AX and most likely the fritz!box 7520, too. The tested 7530 and 7530 AX used the newer fritzbox design. Their original casing dimensions are 20.5 × 15 × 4.5 [cm] (L×W×H),…
Meine Frau hat mich gefragt ob ich ihr so ein Teil Drucken könnte, weil sie sehr gerne Torten macht. Ich habe aber nix passendes gefunden, also habe ich es schließlich selber gezeichnet . Auf den Fotos die ich hochgeladen habe ist eine…
Wandhalterung für FritzBox 6670; 6591; 6690 um diese mit 2 Schrauben an der Wand zu befestigen. Die Halterung ist für die Wandmontge geeignet mit einem Lochdurchmesser von 5mm und einem Lochabstand von 125mm Drucken im PrusaSlicer: -…
