16 805 modeli
This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
This is a remix of my Flying Copter Toy :) My first ones still last strong but everyone is talking about toroidal rotors. I really like this design and I think it is a meaningful appreciation of the main design. But try it out yourself! I…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring. I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Bed of…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
This 2-digit counter boasts a stylish design! It features a wheel with a satisfying click. Each number comes to a stop with a click. and easy snap on assembly. Assembly: 0. print a total of 5 parts: ‘Case_M’, ‘Case_F’, ‘Spring’,…
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
Found this on Makerworld but it is no longer there so enjoy! Design Concept The Bubu figure is an adorable creature characterized by large enigmatic eyes that rotate, lending an interactive element to the design. The whimsical fur texture…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Clamp X motor cable sleeve (with zip tie) to this and protect cable against mechanical constraints. Points cable down and slightly back.
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
Gently snap the caliper onto the disc.
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. I made this rotating keychain display. It's very sturdy and requiers…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
Źródło oznaczyło ten model jako treść 18+.
UPDATE 12.12.2023 New Version 3.0 replaces all the other variants. The new version supports all types of Steam deck cases ( with tab, no tab, wider, smaller, etc) and can be individually adjusted to the the right size no matter the…
This modular massage roller is designed for deep tissue maderotherapy and regeneration after a long day or workout. Each roller head can be swapped out for a different texture – from gentle to intense – depending on your needs. 🔄 ✅…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
You can find the openscad code here: https://github.com/diademiemi/openscad_fidget_toys This can be printed in it's default orientation in-place, no supports
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…
Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
Don't forget to give me a like 🧡 Share photos of your prints 🥕 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬 I made two versions - with eyes and without 👀. The carrot top prints separately. It has a small…
Parametric protective case/toolbox with a groove for an optional seal. You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness. Print settings any rigid filament 0.2mm layer height 0.4mm…
A cute low poly parrot. Easy to print without supports. Includes 8 multicolor variants as 3mf files with 3-6 different colors: 3 colors: Cockatoo (V1), Blue Macaw (V5) 4 colors: Green Parakeet (V2), Blue-Yellow Macaw (V6), Gray Parrot…
Check out other Christmas models:
I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…
This is the SECRET 67 brainrot (suggested by Lobin_3794330) Make sure to follow for more models and feel free to suggest any model ideas!
PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…
New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
Welcome wastelander to my humble collection of Fallout Protectrons! All of these models are scaled for Fallout Wasteland Warfare at approximately 38mm unbased height. Adjust them as you see fit for other purposes; 85-90% seems about right…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips Edit: Replaced entryPlug, Kata, Blade, Tri in the armor part, very minor changes so less glue required. Added frame-head because I forgot to upload…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
Protect your wipers in the winter for a minimal cost! Even 1 clip will move your wiper away if placed in the center → use more clips for longer wipers Wiper edge does rest in the empty space, so the rubber is not deformed Bottom is…
This is a new addition to my Paralane design… the Paralane Desk Organizer. This organizer comes in three different sizes to fit most desktop situations. You can store large or small items you need within reach. And it rotates!! Don't have…
This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…
Apple Lightning to USB C cable protector for your new cables. Maybe you need setup upside down this model on your slicer. I used raft while printing. You need to slice it so that the narrow edges are perpendicular on the print bed.
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563 Fits for most of…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
Build Guide Bill of Materials FAQ Open Beta Fileset (not all components complete) Buy hardware or printed parts at SilverFoxIndustries A spiritual successor to the Gryphon, though not a replacement. Leaning further to the direction of…
Credits This Was Not Made By Me Don't Credit Me Give The Guy Who Made It Credit The Link To The Original Is Here: https://www.tinkercad.com/things/jL5AdsdRVvu-strawberry-elephant-slightly-remodeled Just To Make That Clear
There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Battle Brother consists of 4 parts. 2 versions of files are…
In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다
To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
ProtoXtruder Latest update: 2024/12/12 An extruder that utilizes the large extrusion gears of HGX-lite gear kit and comes with the mounting pattern of the Sherpa Mini Extruder . There is also an untested version for Bondtech LGX Lite…
A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…
This cylindrical tackle box features five individual compartments accessible by rotating the box. Ideal for organizing fishing hooks and other small items. I recommend to print it in PETG. Assembly Take the "Clicky Thing" and insert it…
Intro This is an ergoniomic bit tool with a nice textured handle and rotating end piece ! Try it, you will really enjoy working with it! Why you'll love it? Suitable for all HEX bits Very small but still a super grip for all your work…
Please refer to the video for instructions : https://youtu.be/yzxPOTRFquc AA Battery Sheets (12x12mm 01) https://s.click.aliexpress.com/e/_DlyBLLt Shrink Tube https://s.click.aliexpress.com/e/_Ddri5N3
Brainrot ballerina cappuccina
A model of the secret 67 from Steal A Brainrot. The size does not matter, and can be printed at whatever scale. This is completely printable, though a few supports are needed. It would be best to print in a blue color and paint or…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
I Use the Logitech Pro X TKL Red keycap by @TheMilkman Link: https://www.printables.com/model/1013639-caution-keycap -Clip the parts togehter and glue it on your keyboard -You can glue it on the back of your keyboard or clip it in -Don't…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Creality K1 evacuation fan protection in case parts start flying in the chamber. Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any Installation: Remove the screws that hold the fan in place…
The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…
Tired of repeated darts assembling and disassembling? Do you need simple, one-piece protective cover which will keep your darts safe and flights straightened? This is the solution for you, I hope. ;) Video: https://youtu.be/pb-j95AZSgk…
This is a different interpretation of the rotating ring toy by Marvin. There is 3 models, each with different tolerence. (0.2, 0.15, 0.1) Comes with a base to display the toy.
This rotating colander is a practical tool for rinsing and draining fruits or vegetables, designed for easy 3D printing. The file is ready to download so you can print it yourself and add a useful piece to your kitchen.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…
Keep your furniture, walls, and equipment safe with this simple yet effective Corner Protector Guard. Designed to absorb bumps and prevent scratches, it’s ideal for desks, tables, cabinets, or workshop setups. The curved inner shape fits…
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
remake I made of a model and made it easier to print and also made it so that it could be enclosed.
ProtoXtruder 2.0 Last update: 2024/04/19 The sequel of ProtoXtruder ! With the new gears of HGX 2.0 Extruder (affiliate link) , it becomes thinner and lighter while providing the same benefits of the large-sized gears. Although it is…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
