Liczymy pasujące modele…
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Flexi-wing airplane model with flapping wings and spinning propeller when the button is pushed. Model size: 180mm wingspan, 130mm nose to tail, 50mm tall. All parts need to be printed at 0.15mm layer height with 0.4mm nozzle or better to…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
I have been flying RC models and printing airplane models for years. Designing a flying machine can be tricky. Should I enroll in a proper fluid mechanics? Not yet, I took the challenge to retrofit an existing balsa wood airplane model as…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Watch it fly here: Pls sub
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This model uses very little filament and the result is very interesting (in my opinion) and protects my airplane models from dangerous hands. Additionally, gives a kind of “diorama look” to the models. This model was printed using a 0.8mm…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Brighten up your home with a new planter and celebrate the launch of the new Prusaments rPLA material, which is made from recycled PLA obtained from industrial waste, and without artificial pigments. The coloring of these Prusaments comes…
Wydruk około 9,00 €–11,00 € nettoWstępna wycena jednego wariantu
Step Datei anbei um die Datei abzuändern.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Everyone who has flown one of these models long enough has experienced a cracked cowling. This is a printable replacement part for Guillow's 504 Supermarine Spitfire balsa model airplane. A tiny bit of infill with single walls compares…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Look at the picture. Very simple print.
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Filament: PLA Layer Hight: 0.1-0.08 Print Time: 5h 7m Used Filament (G): 20 Used Filament (M): N\A Infill: 5% Brim: No Support: Optional I built these for the apprentice 1.2M but any plane with a wheel rod of 3mm should work fine. You…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena jednego wariantu
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
Superplasma Kask Helmet was missing a circular clip that holds the straps down to the helmet. Printed this in Overture PLA with 15% infill. Recommend using a skirt/brim as it was knocked over the first time I tried to print it.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Clip the Tip onto the Front of the airplane, or the back of the airplane that connects the wings
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Jesle na seno pro klec typu Ferplast Arena, kdy je nutné, aby měl zavěšení odskočené.
Wydruk około 14,29 €–17,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. A version with a hoop for keychains…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
@Anna, C97121-A2025-C26.stp, Adapterplatte Groß
Wydruk około 5,97 €–7,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The official font for number plates in Germany is FE-Schrift. See attached pdf file for details how to change the text in Fusion 360
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing a new sl
Introduction “HAWk” is a flying wing concept designed for RC hobbyists that feels just as good to fly as an RC plane made from conventional materials. It’s printed in light weight PLA (LW-PLA) with most pieces in vase mode for maximum…
Check the new redesign: Phone Holder V2 which features an even more compact design and no magnets required! (It does have stricter tolerance than this version tho, so keep that in mind) Description This phone holder is perfect for holding…
Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…
***IMPPORTED FROM THINGVERSE*** During the season the Mark Rober’s World’s Smallest Nerf Gun video came out and we wondered if a similar process could be applied to a paper airplane? ( https://youtu.be/9c2NqlUWZfo?si=hDiZxToKSbAoWZpr ).…
Airplane with rotating propeller. For durability I recommend to print it from PETG or more durable materials, at least the propeller. All parts should be glued together. Cockpit framing is optional and only decorative. I've made three…
An airplane I made in 2006. It is not supposed to be based in any existing plain, just a generic plane y imagined. Print instructions Category: 3D Printing Summary An airplane I made in 2006. It is not supposed to be based in any existing…
It works with 9gr micro servo. A single servo or two separate servos can be used. Material: PLA Print setting: 3 walls and full filling 2.5mm steel rod can be used for struts. 4 pieces of M2.2 or 2.3 (Length 6-9mm) screws are required.…
PLEASE USE GCODE FILES ATTACHED IN OTHER FILES SECTION G-codes.zip G-codes were generated using Cura 3.1.0 slicer and tested for Original Prusa MK2S printer, but we also achieved comparable results with a cheap Chinese printers Infitary…
Model letadla, jako hračka. Cca 20cm rozpětí.
Intermediate Level Forward Swept Wing RC Aircraft. Designed for PETG - will also print with PLA. Multi-Part Print, 700g of filament. Very Gentle stall characteristics, high stability, large speed envelope, and top speed with recommended…
H0 (scale 1:87) coal bunkers/campsite 100mmx70mm with board. The boards can be inserted variable! H0 (Maßstab 1:87) Kohlebansen/Lagerplatz 100mmx70mm mit Bretter. Die Bretter können variable eingefügt werden! Print instructions Print file…
Introduction When first learning to fly RC airplanes, it's hard to overstate the importance of a steady supply of spare parts. Flying is quite easy; it is landing that's hard.* The Ares Gamma 370 was not my first RC plane, but it was my…
A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.
In homage to my old Beech Musketeer, I made this fun little toy you get to assemble yourself. May you have a CSVU day! This one prints without supports in your resin printer. If you found this useful, it would bring me great joy to see…
Kit card with a small biplane. easy to assemble, beautiful to decorate
Este modelo é dividido em duas partes com pinos separados para não precisar de suporte
Thight fit with very thin case (0.7mm) like Filono carbon. You can print only the first couple of layers to check if it fits your phone. Easy to hang in the seat in front of you. Printed with 0.4 noozle at 0.3mm hight or lower depending…
For ease of use and playability, I prefer children to have a hand-thrown airplane. However, the available options for this type of airplane are almost the same. Making a hand-thrown airplane with balsa wood and film is very cumbersome.…
A fully 3D printed rubberband plane. Print parts and plane body and assemble. No tools needed, but threading a piece of string or wire through the body and pulling the rubber band through makes it all a lot easier. Build Instructions take…
This airplane models collection includes a curated selection of both classic and modern aircraft designs, perfect for hobbyists, collectors, and aviation enthusiasts. Each model has been created with smooth surfaces, accurate proportions,…
You need to unscrew the two Torx from the original Base and replace them with 25mm M4 (DIN 912 fits perfectly for my model). Bonus: if you delete the electronics from the base you can put the cables for the unit through the base and my…
3D printable model for a numberplate for the handlebar of a downhill mountain bike. We obtain the best results by printing with HP MJF in nylon PA12 or SLS with PP. If you want to print with FFF printers, try using flexible and tough…
AIRBUS A320 Airplane Pop Flat Card
I just wanted to slim this awesome model down so I cut just about ⅓ of the material off in such a way that requires NO SUPPORTS . Use brims because I chopped off a lot of material. *Simulated until I take my next flight:
This design includes all digits from 0 to 9 as well as letters A through E, allowing you to freely assemble any house number. Each character is shaped as a hollow shell with two round recesses on the back. These recesses fit onto matching…
kit card of the Cessna 180 aircraft model for decoration. suitable as a gift for your husband, children. easy to assemble and beautiful for decoration. composing is fun assembly guide:
Print with 0.12 mm Layer Height No support needed You may need to add a brim to prevent the objects from falling over The zip-lock mechanism is working, but glue is recommended anyway. Have fun! …check out my other RC-related models on my…
Magnet based on the US Air Force B2 Spirit airplane. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
Here is a remix of the altimeter desk clock, including a tilted version, or with magnets, and also extra faces/needles (Airspeed and Heading indicator), with MMU compatibility if you have it (use faces with “MMU Only” and split them to…
F22 Raptor with a wingspan of 70cm There is also a single part print to scale to the size you want
Little fun win catcher, modeled as an airplane There is models for single colour and multicolor with different hole sizes(7-14mm) in the bottom for attaching it to something like a fence post Settings Main body requires support under the…
Arguably the most iconic American fighter of WWII t he North American Aviation P-51 Mustang is an American long-range, single-seat fighter and fighter-bomber used during World War II and the Korean War , among other conflicts. Did You…
This is a slingshot for small planes, like the great planes from robotfriend https://www.printables.com/de/model/456057-f23-ultralight-glider-print-in-place…
Should be a very easy print. No supports needed. PLA is fine but PETG or ASA for better durability is good.
FINAL VERSION LINK Link to build plate adhesive that I use for reliable printing: TERRABIND X50 PLEASE LEAVE A COMMENT IF YOU HAVE A QUESTION OR IDEA FOR IMPROVEMENT. Video of Velora flying NOTES CG is marked on bottom of plane with an…
Model airplane hanger that holds the aircraft by its wheels. Fits any wheels up to 110mm in diameter. I used drywall anchors to hold it to the wall. I have had it up for a little over 3 years now and I haven't seen any trouble with it…
Just my take on a solution for displaying kit card aircraft on a slightly angled stand, with a distinct swoop but high stability. It's not a universal solution, but should hopefully fit many models. The stand comes as a kit card itself,…
If you get value from my work, consider supporting me at stu142.com/supportme Airlpane phone holder that also works with different devices. Clips onto the tray or sits on top of the tray. Consisted of two slim pieces instead of a thick…
Three different styles of R/C control horns for your homebrew foamy R/C planes. Designed for printing in PETG or ABS at 100% infill for optimal strength. Flat horns are designed to be pushed through a slot cut in foam. Big horns need…
Summary This a micro airplane quickly and easily printed, perfect to give to children during a Maker Faire! It does not fly, too small and not made for it, this is a toy :-) Print Settings Printer brand: Prusa Printer: i3 MK2S Rafts: No…
Display stand for Airfix 1:72 models. Ball joint allows you to pick the best angle. You may need glue to keep heavy models in place. It can be printed without supports. Category: Models
Replacement covers for Niko switches/outlets in the EU. Niko parts are very expensive. Especially if you want a different color from white/cream. **Triple one can only be used horizontally as verticals are sized differently** Clicks in…
A simple glider inpired by a paper airplane. Instructions: Print with low or no infill as it will be to nose heavy if you put infill Use 2 walls Make sure to level your bed properly before starting the print Any remixes are very welcome…
Needed to bring something for my engineering college Christmas party. Wanted to make cookies but didn't have any cutters. That's when I came up with the idea to whip up this airplane cookie cutter for the Aero Club. While 3D printing…
For people waiting for their elements, here is the STL for the cone in First Tech Challenge's Powerplay. Good luck!
54 mm diameter tire and only 8 grams when fully assembled. This is designed primarily for RC planes but can be used with anything. The tire is TPU printed with 0.8mm walls and 0 (zero) infill so that it is hollow and rubbery. The wheel is…
I made two doorplate versions of the Paw Patrol logo for my sons children's room. For a better printing I simplified the logo. Version 1 - MMU - 3D: Different heights of the color layers Version 2 - MMU - flat: A flat version, so you can…
3/31/25 Version 2 is out! Realizing that you might not have the exact size screw you need, I made 2 versions using a M4x12 or M4x16 screw, depending on what you have in stock. Put the screw length above the screw hole. Added slots for…
Inspired by a helicopter model. I made a print-in-place airplane for a fun toy.
airplane propeller r80mm h10mm dh5.25mm
Updated, no more mesh defects! I merged the single parts of the Extra 300 design by rhinodk into one (except the propeller) using Blender. That way it is printable with support but without the need of glueing the wings, which turned out…
This is a model fighter jet I designed. This will require supports if you want to print it in one piece, although is still pretty quick to print. It is inspired by many real fighter jets/aircraft but this one is completely original.
Dieses Set enthält eine Waffenkiste mit zwei Fliegerbomben aus dem zweiten Weltkrieg. Das Modell hat den Maßstab 1:16 und eignet sich perfekt für 1:16 WPL RC Trucks, oder andere Fahrzeuge im Maßstab 1:16. Die Bomben Modelle sollten mit…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
These are replacement keys for Synology NAS like DS918 or any other with 3,5" Hard disks with a Key lock. I use this in my private environment because there is no extra safety needed (These locks aren't safe anyway). It's also nice to…
I modeled one of my favorite aircraft, the Cessna 172, for you. I believe it will be a great decorative piece to adorn the desk or home of aviation enthusiasts like myself. Please use your printer’s standard settings when printing. Note:…
Use at least 20% infill. All airplane models are available here: https://www.printables.com/social/70502-clerx/collections/316600
It has 4 whistles that are really loud. It is 69mm tall and diameter is 20mm and fin diameter is 40mm. This is a smaller version of another bomb I made. Be sensible and don't drop over people or property. Print on end standing up. No…
Make your luggage easier to spot with a colorful luggage tag with an airplane logo on both sides. Print it using your favorite color filament. I used 90% infill for strength and supports on the build plate.
Note on tolerances: The model tolerances are very small (0.1mm) in order to make the locking mechanism work. Description This compact phone holder is ideal for travel and during flights. It hooks to the airplane folding tray or can also…
Please post your makes, I'd love to see how everyone's project turns out! Introduction This is a desk stand for to aid in the construction of model airplanes. I designed this around a few different plans and took the best features from…
CD Mount for 10.26" Carplay external screens that can be found on Aliexpress/Amazon. The one im using is from Aliexpress OBDPEAK T20. It uses the 4 clips mounting system. This remix version has the following feature from the original.…
A little turbo jet engine for model aicrafts or somthing else Print instructions print everything with brim and with prusament petg print with quality 0,15 and 0,4 nozel and 15% infill no Supports
This model allows you to shoot paper airplanes and cards using only a rubber band, Print the model at 50% if you want to make the most effective card thrower. supports are only needed for the small trigger and the body does not need them,…
This custom baseplate fits on VFC Glock magazines and has a dot matrix for markings on both sides. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA (Army Green) 10% Infill 0.1mm Layer Height If you need anything, feel free to…
Customizable (remixes allowed) versions of the stands that are included with my free models. Both .step and .stl files are included. All airplane models are available here: https://www.printables.com/social/70502-clerx/collections/316600
screen can be bought here: https://getcartablet.com/products/pro-max-1 cheaper here, but not sure if its the exact same model: https://nl.aliexpress.com/item/1005006744171534.html how to remove the airco grill: (stick the butter knife…
Das Sensorkabel habe ich durch ein längeres ersetzt. Eventuell sind Verlängerungen notwendig bei der Nutzung des originalen Kabels.
This is a flexible F-15 Jet I made with HIGH FLEXIBILITY! There are no supports required, and I printed mine at 75% scale with normal PLA (look below for print settings), it printed just fine. I'm not sure if you should print it with…
Hi, I made a new model of a small airplane which can be used as a keychain. Simple without any high demands on your printer. Hope you like it. There are two versions → hole in the front part of the model and the second in the back.
Das ist eine Spurplatte die für BMW Modelle mit einem 5x120 Lochkreis und 72,6mm Mittelloch Zentrierung. Zentrierung ist mit Spiel auf 73mm geplant. Alle Spurplatten haben ein 3mm Konus, wegen dem Konus an der Radnabe. Zusätzlich: 1+2+3…
I saw something similar on the Web and thought I could do this my self. So here it is an Airplane Window Picture frame. The Picture size will be 10x15mm (4x6 inch).
I picked up one of these cheap wireless Android Auto/Apple CarPlay displays from Amazon (specifically the 9.26" one from VSTARK which was going for about $189 before coupon at the time of this writing). Rather than plopping it on top of…
I downloaded tj4sheelee's base idea for a CarPlay mount, and while it did fit my screen perfectly, I still needed a way to mount it in my car. So, I made this other model that achieves just that: it mounts the screen in the car's CD slot,…
UPDATE 30 Jan 2026: It was pointed out that the left wing STEP file incorrectly had a flat on the winglet. The individual part files should already be oriented correctly for easy printing. You'll need generous use of supports for the…
A miniature of an airplane hanger. The main body and each door are provided in separate .3mfs so that they can be connected after printing. The fusion 360 model also has sliding joints for the doors if you want to print them on in any…
![VELORA 3D PRINTED RC AIRPLANE WING [TEST PIECE]](https://media.printables.com/media/prints/768011/images/5979348_a352c031-c3ea-4c4a-9265-edc84a2e2fe8_d49f1449-a16b-452b-8894-2d3c9acbeb53/screen-shot-2024-02-16-at-51843-pm.png)
