Liczymy pasujące modele…
We needed to mount the översidan LED strip to a wardrobe with a top lip that prevented using the standard mounting hardware. This is a very simple screw-in clip mount for the LED strip. I used a MK4 with the Input Shaper 0.20mm STRUCTURAL…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
Second knife of the resident evil series i really wanted to make (i may just go ahead and make a bunch more) This time around i used some different tools from fusion 360 to make the bevels of the blade to keep the shape as authentic to…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Sleek drawer design with stopper to make sure it remains in position once pushed in.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Masterful Dungeons Tile Base is designed as part of the Masterful Dungeons modular dungeon system. This base is an alternative underside for tiles, intended specifically for saving filament . Instead of using fully double-sided tiles,…
Takeaway container are one of the main plastic waste of today's society. To help rescue some of my containers from the landfill, I am using them to create a quick printing extendable drawer system. First off the project is an underside…
This model is compatible with the lego system.
This model is compatible with the lego system.
My pegboard had too much empty space and I run out of hooks. Instead for using an existing hooks design, I chose to create my own, and get to know how to actually design models. There are different pegboard form ParkerSide. The hole…
This is a remix of the “Prusa Saptula Printables - sample model.” by Prusa Research. I added 4 changes to the original. Changes I made: 1. I added on the underside a pattern so the spatula can wipe the printer nozzle to pull off strings…
These parts go on the underside of the Shuttle crawler version. There are 8 muffler boxes, 12 air handlers and assorted cable trays.
This model is compatible with the lego system.
Supports will be needed for the elevated platforms. I used tree support bcs it breaks away easy. I attached it with “TESA Powerstrips” since i didn't want to use screws. Takes about 90 minutes to print one side on the BambuLab X1 carbon.…
This model is compatible with the lego system.
The model has a screw hole, with opening for a screwdriver, but that is only for safety. You should attach it with a double sided gel tape and use the screw (a short flatheaded one) only when necessary. Works just fine in PLA for standard…
Design is print in place and is working with all lenghts of översidan
This model is compatible with the lego system.
Easily mount your Nintendo pro power A controllers to any underside surface. Great for the underside of a TV as shown in the picture or under a desk. The controllers hang from the joysticks and slide in and out with ease.
This model is compatible with the lego system.
This is a remix of https://www.thingiverse.com/thing:3349588. I wanted to mount the black PSU for Prusa MK3S+ to the underside of my Ikea Lack enclosure. I used the original mount for my Ender 3 V2, and I liked it so I remixed it to fit…
Replace broken or lost underside clips with this durable and easy-to-print Volvo clip. Designed to fit under cars, this clip provides a secure mount for screws, ensuring proper attachment of components like engine covers. Based on the…
For mounting a 2.5" SSD to the underside of a 3.5" HDD. Useful for unconventional HDD mounting locations. Category: Computer
if you are using a heavier laptop recommend to print more mounts to distribute the weight or increase the infill density. ideally place the mounts in points where they wont block fans of your laptop
This model is compatible with the lego system.
This is a wand mounter water broom for washing car undersides. I was unable to find a water broom that worked without a pressure washer. I often drive on the beach and want to wash off the salt from under the car after a day of fishing.…
A simple, minimal (quick to print), PS4 controller under-desk-hanger. I added screw holes to Tom's original design. The “loose fit” file is designed to allow the controller to slide in and out easily, while the “tight fit” file has Tom's…
This model is compatible with the lego system.
Hi all, Made an adapter for Ikea Pax Light bar in order to be more angled and give more light towards the user, instead of flashing deep into the wardrobe. It has a tight fit and is designed to be under the shelf. (Please remember, it…
Remixed the base model to make the base 10mm taller to accommodate the battery holders soldered to the underside of the PCB for easier battery swaps. The Original project can be found here:…
Attach this to the bottom of items to help protect surfaces from damage. Use spray adhesive, glue, or VHB tape to affix to your item. I printed with TPU - 100% infill.
This model is compatible with the lego system.
Like the Pax hole plug, but with a 3mm cable cutout for Översidan LEDs. Prints nicely in Vase mode. Consider printing slowly (it's tiny anyways) to keep the dimensional accuracy. CAD file on OnShape:…
Somehow the strips covering the channels in the underside of our Thule Wingbars went missing. It turns out that above about 65mph, the car makes a very loud whistling noise without them. It also turns out that they're reasonably expensive…
Reduce pressure behind the radiator. Exhaust hot air. An alternative to hood vents, but not as effective. Need to print two, one needs to be mirrored. ABS 6 walls drill your own mounting holes No support, upright print
This model is compatible with the lego system.
My hand pump was older than the new model where Decathlon has introduced this adapter. I didn't want to throw away my pump, nor to buy the repair kit, because in the kit there are also other pieces I didn't need. So I just reproduced it.…
Collection of mounting parts for Ikea ÖVERSIDAN LED wardrobe lighting strip with sensor. The design works with all lengths of Ikea ÖVERSIDAN. Bug-fix for top section mount on new PAX wardrobe 2024 with sliding door I originally created…
Print with 3 perimeter and 100% infill
Cable hanger for the underside of a desk, to organize my desk at work. I printed a bunch. Double-sided tape added. I plan to use an additional screw to hold it in place. The “wings” have an added flexy section for PLA printing. Source…
Bambu P1P Pegboard Rearside closed with clearance for belt tensioner. Bambu P1P Pegboard Rückseite geschlossen mit Aussparung für Riemenspanner.
When I wanted to light up my IKEA SKÅDIS pegboards using the IKEA ÖVERSIDAN I was surprised that nobody before me had created a mount for them. So, with no previous (S)CAD experience I made this my first modelling project and here are the…
To be screwed onto the underside of a shelf or other suitable surface. Fits a 200x200mm print bed if rotated by 45 degrees.
A design inspired by @KupgughIronTusk 's https://www.printables.com/model/396942-ipad-pro-129-under-desk-slide-mount for what hardware I had Dimensions Overall dimensions: 143 mm wide, 207 mm long, and 21 mm high. The area where the iPad…
Easy and simple to use cable organiser for the underside of a 160x80cm bekant table, or any table for that matter granted you fix the table clips at the required width. Relies on the bending of the hook to fix into the slots for the table…
This is a support for hole saws from 60 to 95 mm that fits into the ParkerSide (Lidl | PowerFix) pegboard. If your printer can handle up to 45º, face the model with the open side to the bed. You will then only will require supports for…
No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the model with a lighter or hot air…
The original chainring guard on my Riverside 500E (Decathlon) cracked after normal use — and I quickly discovered that no spare part was available , either through Decathlon or third-party suppliers. Rather than leaving the chainring…
IKEA PAX ÖVERSIDAN LED Clip - extended with built in wire management
PSU holder end part is holding the end of PSU so it doesn't slide out. PSU holder hole part is where you slide the PSU through. PSU holder joiner joins both parts and has enough holes to support PSU weight even with LACK's paper insides.…
This model is compatible with the lego system.
A Remix of the Other CSS-1 on here. All i added is some bottom detail (for fun) and I beefed up the "engines" just a smidgen. Great Model replacement for the cardboard piece in X-Wing. Happy Printing Print Settings Printer Brand: Prusa…
This is a support for a hole saws from 25 to 62 mm that fits into the ParkerSide (Lidl | PowerFix) pegboard. You will need supports for the part that fits into the pegboard. can be printed with the biggest side on the bed. The numbers are…
I wanted my antenna mounted down below in the middle away from everything else, this worked out well, you can mount the board in front or back and it can flip to accommodate. I have some with full size T and some with the blue betaFPV…
Note: This is not a full mount for the PSU. It holds one end of the PSU and is indented to work with another quick release model for the other end! I needed a quick and simple horizontal mount for my PSU after building a table and…
Found the Top Door Hook by Lowd14 stylish. So I just cut it a little and reinforced it for sticking on cabinets.
Plates that supports third party footpads to reduce contact with battery box/ controller box. Haven't tested yet, update soon. Category: Toys & Games
Note that this was made on a modified Prusa™ Mini+ with a slightly taller Z axis. Recommended Settings Layer height: 0.25mm First-layer height: 0.25mm Solid bottom layers: 4 Spiral vase mode: ON Extrusion width for external perimeters:…
I wanted to mount my MCDU to underneath my desk because I have limited space on top of my desk for my MCDU. I also have a really crappy desk I don't mind drilling into. this mounts directly to the included mounts included with the MCDU. I…
Print settings : Filament : ABS Infill : 20% Walls : 4 Resolution : 0.20mm Supports : No Post print : Add 4x M3 6mm (height) *5mm (diameter) heat-set inserts in holes.
Designed and printed out a pocket/holder that can be stuck on the left hand side space between the two button panels. I used PLA as a test for now, would recommend ABS/PETG for heat resistance. I used nanotape to adhere the pocket, foam…
plug for the underside of the toilet seat you are sitting on, I recommend printing from TPU or TPE full filling
Miniaturas ciudad universidad
I designed this to hang my 15 watt UV sterilizer from the underside of the top of my custom, aquarium stand in the sump compartment. The sterilizer should fit snug into the semi-circular section and then use zip ties to fasten the…
Clip it over one of the the sensors for the IKEA ÖVERSIDAN print with PETG
Deutschsprachige Beschreibung im Anschluss I'm owning a SKS Mudrocker set, but the included "Rear Extender" doesn't fit for my Cube Race One 2015. It would require to remove nearly 1/3 of the width to be able to push it between the seat…
This is a Remix adapted to my requirements to enable a waterproof electrical cable connection. The side holes are sealed.
Small little organizer for tools and/or small trash place for small printer left owners
I needed a new tray for my CTC Riverside SLA printer (basically a Form1 Clone.) The price was a bit steep for a bit of acrylic and a piece of tape, so I built one. I've attached several different formats, I designed it in Sketchup, but…
This is a jig for marking the hole for mounting a 28" IKEA Översidan light to the 31.5" Billy bookcase shelves. It centers the light on the shelf when aligned with the edge of the shelf and marks the hole at the correct depth. DOUBLE…
C'est un support pour un vieux honor 8 et qui se monte sur un vélo décathlon riverside 500e. Vous avez besoin de 12 vis M3 CHC assez courtes et donc 12 inserts M3 6 vis courtes pour le couvercle (6mm) 6 vis un peu plus longues pour les…
I made a simple enclosure for my MK4, based on an IKEA Platsa cabinet (great tip btw). I put the entire enclosure on tall feet, so that I can put some stuff underneath, like drawers or tools. To make sure the door can close and there is…
This is a set of power strip brackets I designed to angle my power strip on my garage workbench to easily plug stuff in. The added benefit is the cables doesn't get as strained like they would with the strip mounted at a 90 degree angle.…
Tested with Xbox One and Dual Sense. Might work with other Gamepads as well, but not tested. Do not print with Fuzzy Skin in that Region - It will not work. The Top-Side needs to be flat. You can sand it down, if you have used Fuzzy Skin…
Diese speziellen Clips sind als praktische Erweiterung für die IKEA Översidan LED-Lichtleisten konzipiert. Mit diesen Halterungen können die Lichtleisten einfach festgeschraubt werden , was eine sichere und stabile Installation…
Small drawer for the underside of a bekant table, suitable for the 160x80 cm version as shown on picture. Easy to slide in and out of slots based on feel without looking due to just barely fitting between longitudinal square sections of…
You'll need to print one kit without cutout (left side) and one with cutout (right side - for PTFE tube) additional parts: screw M3 x 12mm → 3 x 2 x for the mounting kit itself 1 x for enclosure screw M3 x 16mm → 1 x screw M3 x 30mm → 1x…
I made this cover for my folding bike seat post to not scratch it and floor as it is used as one of the stand points for it. It's a tight fit, needed some hammering for it to not push itself out. I recommend more infill, bottom layers and…
Modified this to hold a female DC connector as well so I could use it for this project: https://github.com/fmalekpour/OctoPrint-Cooldownfan Modified from: https://www.thingiverse.com/thing:1726120
Created for mounting on the underside of the dash for 12v and USB style outlets.
J’avais ce panier vendu par Décathlon pour être fixé sur les vélos Elops : https://www.decathlon.fr/p/panier-velo-500-avant-12-litres/_/R-p-1068?mc=8031536&c=noir J’ai acheté un vélo Riverside 900, mais le guidon est plus épais. J’ai donc…
As part of a new wardrobe Ikea Pax wardrobe installation, my daughter & her partner wanted to use the Ikea Oversidan lights. Ikea advise drilling 8mm holes in any shelves and cabinet tops to route the cables out of the wardrobe. Messy and…
A set of hooks designed to slide into the underside rail of the Seville Classic UltraHD line of workbenches. The hooks are designed to be rotated into the rail on the underside of the desk. These models can be resized and added to any…
Krytka Pracovního světla Parside performance
Bei trennen und versetzen der zwischenwand bei ford transit (Fahrerseite)
print this little grip with TPU and glue it (with E6000 or equivalent) to the bottomside of your print. designed for https://www.printables.com/model/357933-desktop-volume-mixer-deej
Made in TinkerCAD. Pirinted in PETG, with 50% infill, 0,2mm lines, 4 layer walls and roof and bottom.
SOVOL SV08 Underside Mounting Plate. So you can add extras to your SOVOL SV08 3D Printer I use this to add two-way lighting to my SOVOL SV08
this guides the filament and keeps the filament from unraveling over the sides. this snaps onto the cr10 spool holder since i made it for my cr10, but may work with others. no supports. Category: 3D Printer Accessories
An assortment of items are often left to the side near the front door of a home. Items such as keys usually find themselves having a home in the form of a key rack or box. However, other items such as toques, mittens, scarves, lettermail,…
La impresión 3D se llevó a cabo con OrcaSlicer y Klipper. AJUSTES DEL FILAMENTO Tipo: PLA TEMPERATURA DE IMPRESIÓN Boquilla: Capa inicial: 195 °C Otras capas: 192 °C TEMPERATURA DE LA CAMA: Bandeja PEI suave/Bandeja de alta temperatura:…
Just like how the Hinges for my Vanguard broke, I guess it was about time that the underside base cracked as well. I however, don't like throwing stuff away that I feel still has use in them, so I dedicated a few hours to building this to…
Modelado básico de llaveros personalizados de la universidad La Salle Noroeste. Falta agregar nombres de los alumnos.
