P
Printableskristianmedk
Makita Router Circle Jig (RT0700CX4)
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
- Pobrania
- 2916
- Polubienia
- 524
- Ocena
- 4,94
Wyniki wyszukiwania: rt0700
Liczymy pasujące modele…
P
PrintablesWHerzog
Baseplate for Makita RT0700 Router
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
- Pobrania
- 1769
- Polubienia
- 261
- Ocena
- 5
P
PrintablesFilip Honzárek
Makita RT0700 Extended Base with Grip
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
- Pobrania
- 718
- Polubienia
- 179
- Ocena
- 4,86
P
PrintablesBombastus Hands
Makita to Festool Vacuum Adapter DRT50 RT0700
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
- Pobrania
- 632
- Polubienia
- 42
- Ocena
- 4
P
Printableswie_das_geht
Planfräsvorrichtung für Makita RT0700C und Makita DRT50Z
Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…
- Pobrania
- 588
- Polubienia
- 182
- Ocena
- 0
P
PrintablesVegatype
Makita RT0700 base plates
I modeled the original base plus two variation when extra surface area is needed when routing
- Pobrania
- 559
- Polubienia
- 93
- Ocena
- 5
P
PrintablesSpamBouncer
Makita RT0700 (Or Katsu and similar Clones) Router 2 Bosch FSN Rail Adapter.
I use a lot of Bosch Professional hand machines in my workshop and have a matching FSN 1100 guide rail. Unfortunately, my beloved Makita RT0700CX2J router does not fit this rail. Buying a Makita rail and a matching adapter is out of the…
- Pobrania
- 525
- Polubienia
- 97
- Ocena
- 5
P
PrintablesHeinzelmaennchen Werkstatt
Makita Oberfräse RT0700 zu Führungsschiene Makita / Makita Router RT0700to Makita guide rail
Makita Oberfräse zu Führungsschiene von Makita / Makita Router to Makita guide rail Same like my version from Makita Oberfräse zu Führungsschiene Festool / Makita Router to Festool guide rail Category: Machine Tools
- Pobrania
- 491
- Polubienia
- 95
- Ocena
- 4
P
PrintablesMaxter3D
OSVAC RT0700 DRT50 Makita Router Katsu Vacuum Plate
If you like the Design leave a like and show some Love ;-) I remixed Thing 4581505 to fit for OSVAC and gave more volume to enable more Dust to pass through. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Filament:…
- Pobrania
- 445
- Polubienia
- 111
- Ocena
- 5
P
PrintablesFrankWL
Fraesplatte für Makita RT0700CX2J Oberfräse
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der grösseren auflage auf dem Werkstück beim Arbeiten mit der Makita Oberfraese. Dies ist ein Remake vdes Projektes "Baseplate for Makita RT0700…
- Pobrania
- 359
- Polubienia
- 49
- Ocena
- 0
P
PrintablesHammy Eichhörnchen
Adapterplatte für die RT0700 Makita Einhandfräse
Hier ist meine Version einer Adapterplatte um die beliebte Makita Einhandfräse mit der Makita Führungsschiene sicher führen zu können. Ich habe es in PETG gedruckt. Sollte aber auch mit ABS/ASA gut funktionieren.
- Pobrania
- 352
- Polubienia
- 81
- Ocena
- 0
P
PrintablesRemy66
Makita RT0700 - Bosch FSN
remix pour etre imprimer sur les petites machines (200x200) Print Settings Printer: FLSun Q5 Rafts: No Supports: No Resolution: 0.15 Infill: 40% Filament: GT 3D Makers PLA Black Category: Machine Tools
- Pobrania
- 329
- Polubienia
- 92
- Ocena
- 5
P
PrintablesDav
Makita RT0700 to Festool Cleantec Hose Adapter
A simple adapter to connect a Makita RT0700c to a Festool 36mm Cleantec hose. Festool end is based on PwnCNC’s design: https://www.thingiverse.com/thing:3818625 This print does not require supports. My print was PLA+ with 40% infill and…
- Pobrania
- 323
- Polubienia
- 30
- Ocena
- 5
P
PrintablesHammy Eichhörnchen
Makita RT0700 Halteplatte
Zweihandhalter für die beliebte Kantenfräse von Makita. Ich finde es in manchen Situationen hilfreich die Kantenfräse mit zwei Händen zu führen und habe mir daher diesen Halter zum Führen mit beiden Händen überlegt. Dies soll eine erste…
- Pobrania
- 319
- Polubienia
- 66
- Ocena
- 0
P
PrintablesNordheim
Makita Base for DRT50 / RT0700 with copy ring
Base plates with 16mm copy ring for 10mm mills. I did the holes on the side of the ring as big as possible so that the dust collection still works. There are two sizes of the base, 100 and 120mm diameter. They can be used with the…
- Pobrania
- 306
- Polubienia
- 45
- Ocena
- 5
P
PrintablesFrankWL
Fraesplatte für Makita RT0700CX2J Oberfräse
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
- Pobrania
- 303
- Polubienia
- 34
- Ocena
- 5
P
Printableskampfschläfer
osVAC Adapter for Makita RT0700 and clones
Created with the R-customizer for the osVAC system, this adapts my router (a clone of the Makita RT0700) to the osVAC system. I will probably shorten the exhaust of the router so the total length of the dust collector and the connector…
- Pobrania
- 294
- Polubienia
- 20
- Ocena
- 0
P
PrintablesTD3D
Makita RT0700 Router Parallel guide, circle cutting, fine adjustment
Bauanleitung Fräsvorrichtung für die Makita RT0700 Fräse: -Compatible with: dewalt D26204K-QS. Update 20.04.2025: 32mm hole system guide aavakiable as an Add On https://www.printables.com/model/1249568-32mm-hole-system-add-on Update…
- Pobrania
- 284
- Polubienia
- 99
- Ocena
- 5
P
Printableslangepil
Einlegeplatte Oberfräse - Maktita RT0700, Katsu 101750
Einlegeplatte für die beliebte Makita Oberfräse RT0700 und deren Nachbau Katsu 101750. Die Montage des Kantenfräsmoduls in die Einlegeplatte erfolgt komplett ohne Werkzeug von oben. Anschließend wird die Oberfräse von unten eingeschoben…
- Pobrania
- 277
- Polubienia
- 22
- Ocena
- 4,75
P
Printablesgwendal
Makita RT0700 Katsu baseplate with CLEANTEC dust collector
Remix from https://www.thingiverse.com/thing:4861771 , added a CLEANTEC connector. Knob is from https://www.thingiverse.com/thing:3713327
- Pobrania
- 277
- Polubienia
- 49
- Ocena
- 0
P
PrintablesFaHu
Makita RT0700CX2J Tool Wall Holder
Here you can find holders for all devices and accessories of the Makita Router RT0700 (RT0700CX2J). Most of the time i'm using the router at my workshop, so i wanted have quick access to devices and accessories. I designed holders with…
- Pobrania
- 274
- Polubienia
- 71
- Ocena
- 5
P
PrintablesFabber
Makita RT0700C Router Insert Plates
I designed these insert plates for the makita RT700C Router. They help to minimze the gap between the milling tool and the support surface when the router is used upside down with the 195563-0 plunge base. This way, the tilting of the…
- Pobrania
- 250
- Polubienia
- 72
- Ocena
- 5
P
PrintablesRuumen_ch
Makita router RT0700C extensionplate - big and bigger
Designed for better handling during the milling process. the bigger one is designed to stabilized with an aluminium U-profile 11.5x12x1.5 (glued in) to get more stability. Printer: CR-10s pro Material: PETG Resolution: 0.2 wall: 4 infill:…
- Pobrania
- 240
- Polubienia
- 42
- Ocena
- 0
P
PrintablesLayerCraft
Kopierring Makita RT0700
Kopierring zum Anschrauben an den Makita RT0700 Oberfräsenanbausatz. 16mm für 6mm Fräser ----------------------------------------------------------------------------------------------------- Copy ring for makita RT0700 router. Just screw…
- Pobrania
- 228
- Polubienia
- 33
- Ocena
- 0
P
PrintablesHammy Eichhörnchen
Makita RT0700 Schonplatte
Hier zum nachdrucken eine Schonplatte für die allseits beliebte Kantenfräse von Makita. Da ich die Fräse auch gerne unterbaut als Tischfräse nutze ist mir vor kurzem die Schonplatte abhanden gekommen. Also ran an Onshape und eine neue…
- Pobrania
- 224
- Polubienia
- 33
- Ocena
- 0
P
PrintablesiLikeDarbo
Makita RT0700C Router Base
Router baseplate to quickly make beadboards. Designed to be used with a Makita RT0700C and this router bit: Freud 20-301: 1/8" Radius Beadboard Bit System with 1/4" Shank To use the baseplate, notice that there is one edge with a square…
- Pobrania
- 221
- Polubienia
- 21
- Ocena
- 0
P
PrintablesFilip Honzárek
Makita RT0700 Extended Base with Copy Ring
Extended baseplate for Makita Router with Copy Ring, it give you more stability and you can use with template. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this…
- Pobrania
- 218
- Polubienia
- 64
- Ocena
- 0
P
Printablesmaxmar
Larger baseplate for Makita RT0700 trimmer (Vergrösserte Grundplatte für Makita RT0700 Fräse)
Larger or extended baseplate for the popular Makita RT0700 trimmer/router or similar models with the same built and dimensions like Katsu. Additionally, a knob is available which can be mounted in three different positions and the…
- Pobrania
- 215
- Polubienia
- 32
- Ocena
- 0
P
PrintablesWHerzog
Vaccum Adapter for Makita RT0700
This is a simple adapter to allow the connection of a 35mm standard vaccum hose to the plastic dust collector of a Makita Router/Trimmer RT0700. Can be printed from PLA, ABS or PETG For more Information please visit:…
- Pobrania
- 213
- Polubienia
- 13
- Ocena
- 5
P
PrintablesTrob
Base plate for Katsu trimmer (and Makita RT0700C)
‿︵‿︵ʚɞ『 Français 』ʚɞ‿︵‿︵ The description in English is below Attention Cet objet est un accessoire qui se monte sur un outil qui peut s'avérer dangereux et provoquer de graves blessures s'il venait à casser ou mal utilisé. Si vous…
- Pobrania
- 209
- Polubienia
- 40
- Ocena
- 5
P
Printablesfymetool
Baseplate for Makita RT0700 Router rafix
Baseplate for Makita RT0700 Router. Drill for Hafele Rafix connectors.
- Pobrania
- 186
- Polubienia
- 39
- Ocena
- 0
P
Printablescewo
Stock Base Plate For Makita Router RT0700
Simply an accurate replacement base plate for Makita RT0700 routers. To get an easy going router, print on a smooth bed sheet if possible. Prints with PETG or PLA, 0.3 mm layer height and at least 25% infill (grid).
- Pobrania
- 176
- Polubienia
- 43
- Ocena
- 5
P
PrintablesFrankWL
Fraesplatte für Makita RT0700CX2J Oberfräse
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
- Pobrania
- 159
- Polubienia
- 20
- Ocena
- 0
P
PrintablesKG
seal groove router base for Makita rt0700
The router can be fixed with an m5 screw and hex-nut. Place the front surface onto the printer bed. I've had good results with PETG.
- Pobrania
- 152
- Polubienia
- 27
- Ocena
- 0
P
Printablesruggibrante
Makita RT0700 Plunge base with CMT300 guide ring slot
You need 4 x 12mm m4 screws, the original ones are not long enough. Sand the surface with very fine grain paper.
- Pobrania
- 138
- Polubienia
- 19
- Ocena
- 0
P
PrintablesPlanetexpress3k
OSvac Neo Adapter for Katsu / Makita RT0700 Router
I designed an adapter to fit my Katsu Router to the great OSvac Neo System. Printing is a little bit difficult because you definitly need supports. I used PLA+ which worked. out quite nice. I succeeded at first try when using organic…
- Pobrania
- 107
- Polubienia
- 13
- Ocena
- 0
P
PrintablesHow To Homemade
Makita rt0700 rt0701c Wrench Holder | Wall Mount
A 3 - 5mm drywall screw is required to attach.
- Pobrania
- 101
- Polubienia
- 19
- Ocena
- 0
P
PrintablesFlorian Bachmann
Makita RT0700 Plunge Base 195563 osVAC
osVAC suction adapter for Makita RT0700 Plunge Base 195563
- Pobrania
- 99
- Polubienia
- 20
- Ocena
- 0
P
PrintablesSimon Theys
Guide bushing for Makita RT0700C
I needed a guide bushing for the smaller holder for the makita router. One I intend to use to make finger joints. The annoying part is that the holes for the screws are not in a nice concentric circle around the axle of the router. So it…
- Pobrania
- 84
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThullen
Makita RT0700 runout measuring fixture
This is a fixture for measuring runout on router bits and collets on the Makita RT0700 router. The long neck of the fixture makes it possible to measure the router spindle shaft itself, as well as long bits and extensions/adapters…
- Pobrania
- 82
- Polubienia
- 21
- Ocena
- 5
P
Printablesantbar
entretoise pour makita rt0700
entretoise pour réalisation de feuillures. décalage 15 et 25 mm
- Pobrania
- 74
- Polubienia
- 18
- Ocena
- 0
P
Printablessaxghost
Planfrasvorrichtung-für-Makita-RT0700C
Erst einmal vielen Dank an den Ersteller der Vorrichtung. Für meine bestehende Planfräseinheit (Lienearführung SBR16 1500mm x 1000) habe ich den "Fräskorb" und die "Läufer Quer" so angepasst dass diese mit den Linearführungsschienen SBR16…
- Pobrania
- 70
- Polubienia
- 15
- Ocena
- 0
P
PrintablestokoD
adapter_makitaRT0700 / DRT50 > LR32 wolfcraft 4650
his is an adapter to use the wolfcraft4650 doweling jig together with a makitaRT0700 /DRT50 router. So you can use the router to create any holes in the 32mm system. It has a perfect fit to the plunge base 195563-0 and is fixed with the…
- Pobrania
- 70
- Polubienia
- 11
- Ocena
- 5
P
PrintablesFrankWL
Bohrlehre fuer Makita RT0700CX2J Kantenfraese.
Bohrlehre fuer Makita RT0700CX2J Kantenfraese. Die Bohrlehre dient der Übertragung der Maße auf ein Werkstück. Sie ist gedacht, um Vorrichtungen, wie z.B. Fräszirkel, anzufertigen. Die Vorrichtung beinhaltet drei rechtwinklige…
- Pobrania
- 63
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLayerCraft
Wolfcraft Bohrständer Makita RT0700
Aufnahme für Makita Handfräsen vom Typ RT0700 auf die alten Wolfcraft Bohständer. Kann mit der original Schraube befestigt und im Raster gedreht werden.
- Pobrania
- 62
- Polubienia
- 11
- Ocena
- 0
P
Printablesmaot1985
BOSCH Adapter AdvancedVac18V-8 <> Makita RT0700 Katsu Baseplate with dust collector
Der Adapter passt an eine Baseplate mit Absaugstutzen von tobbegraf ( Thingiverse ). Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
- Pobrania
- 56
- Polubienia
- 12
- Ocena
- 0
P
Printablesfymetool
Maktia RT0700CX2 Router spacers for drywall milling
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 20 mm from the rail, the second one another 26 mm for the next milling. Two-color version
- Pobrania
- 55
- Polubienia
- 18
- Ocena
- 0
P
PrintablesLayerCraft
Makita RT0700 Staubadapter | dust adapter
Makita RT 0700 Oberfräse Staubadapter auf Festool D36 | Makita RT0700 Router dust adapter for Festool D36.
- Pobrania
- 54
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHenne
Volksfräse Makita RT0700 Halter + Absaugung + Z-Anschlag
Hier meine Halterung für die Makita Rt0700 Oberfräse zur Montage an die Volksfräse V1. Dazu gibt es noch eine Absaugung und eine Halterung für einen unteren Z-Anschlag. Print Settings Rafts: No Supports: No Resolution: 0,3 Infill: 45%…
- Pobrania
- 53
- Polubienia
- 8
- Ocena
- 0
P
Printablestcatca
Lowrider 2 - X plate Katsu R0700 - Anesty R0700 - Makita RT0700
This is a plate for Makita RT0700 routers and similars https://www.thingiverse.com/thing:4738711
- Pobrania
- 52
- Polubienia
- 22
- Ocena
- 0
P
PrintablesBubTec
Makita RT0700 Light - Oberfräse Licht
Here is my simplified version of the Makita lighting. You only need the following parts. 2x 5730 SMD LED diode 0.5W light 3V (you can buy them at Ebay for 2 €) 10cm some copper wire 1x battery holder for 2xAAA 1x connector 2cm heat shrink…
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBaffo
RT0700C with MGN12C
to attach the Makita Router to lineair rails with 4 MGN12C carriages to cut aluminum extrusions at a straight angle like shown here: https://hackaday.com/2022/05/20/square-cuts-on-aluminum-extrusion-no-mill-required/ Printing at 0.2…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarcin Kargula
Makita RT0700C + Metabo FS rail and vacum adapter Bosch Starmix 35mm
Adapter for Makita RT0700C milling machine. With extraction for vacuum cleaners with esystem 35mm You need use 5mm screwe and nuts + 8mm rod (could be with thread.
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printablesmarkus1575438
Einlegeplatte für einen Frästisch mit Oberfräse Makita DRT 50 - RT0700 / Insert Plate for a Router Table with the Makita DRT 50 - RT0700 Router
Einlegeplatte für einen Frästisch mit Oberfräse Makita DRT 50 - RT0700 Grunplatte 240 x 200 x 10 mm gedruckt in PETG Perimeter 5 Fülldichte 25% - 50% Füllmuster Gyroid mit Organische stützen benötigt werden : 4x Senkschrauben M6 x für die…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printables
RF-RT0700C (~Makita RT0700) trim base plate router
RF-RT0700C (~Makita RT0700) trim base plate router
P
Printables
Handheld Router Collet Box (Designed for Makita RT0700C / DRT50 / XTR01)
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
P
Printables
Makita RT0700 to Festool MFT 3 Table Router Mount
Makita RT0700 to Festool MFT 3 Table Router Mount I am always looking to save space in my small garage. Sometimes this means using one tool to serve multiple purposes. This model allows you to mount a Makita RT0700 router to the side of…
P
Printables
Makita RT0700 dust extractor 35mm (STEP version)
This model was created to demonstrate the reverse engineering process in the Geomagic Design X program:
P
Printables
Makita RT0700 tool holder
Printable Makita RT0700 spindle adapter two possible tool diameters available (3mm/6mm) other measures available on request !!
P
Printables
Rail Guide for Makita RT0700C Router on Festool FS Rail
🛠 Rail Guide for Makita RT0700C Router on Festool FS Rail This guide, designed for the Makita RT070X (tested with RT0700C ) and Festool FS rail , provides a robust solution. The system efficiently utilizes Makita's existing mounting…
P
Printables
Makita RT0700 dust extractor 35mm
print settings: 0,6 nozzle 0,25 layerheight formfutura rPETG with supports, orientation see photo
P
Printables
RF-RT0700C (~Makita RT0700) trim base plate router
RF-RT0700C (~Makita RT0700) trim base plate router
P
Printables
MPCNC PRIMO / CNC / Router - Makita Tool Mount RT0701C / RT0700C
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
P
Printables
Makita RT0700 Extended Circual Base
Bigger circual baseplate for Makita RT0700/RT0701 with rotation mark. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25%…
P
Printables
MPCNC PRIMO PEN HOLDER 65MM (MAKITA RT0700C)
A pen holder for my MPCNC Primo build. It fits a 65 mm tool mount like Makita RT0700C. I have printed this solid bat i think you can do it a little infill... The basic idea was to quickly swap pen and spindle without having to remove the…
P
Printables
Extended Base Plate For Makita Router RT0700
Bigger base plate to hold the router with both hands – especially handy on narrow edges. To get an easy going router, print on a smooth bed sheet if possible. Prints with PETG or PLA, 0.3 mm layer height and at least 25% infill (grid).…
P
Printables
Knob Makita RT0700
Extended base handle for Makita RT0700. The basic dimensions, height and diameters are the same as for the model from cewo, but the model is in one piece, it has different radii so that it can be printed without supports, and there is a…
P
Printables
Makita router RT0700C holder for cnc machine
Holder designed for fr150 CeNeCe (Alarsys) machine.
P
Printables
Makita rt0700 dust extractor for 2.5 inch shop vac hose v1.0
Note: There is also a counterpart to this that captures dust from the top. Get it here: https://www.printables.com/model/257476-dust-collection-port-v10-for-diy-router-table-desi Pretty much all the details you might need are in this…
P
Printables
Remix - Wrench handles for Makita RT0700 router
This is just a properly scaled version of LucMeisters wrench handles to fit the Makita RT0700 router wrenches. The wrenches are around 3mm thick. Prints standing up, Brim is suggested. Fuzzy skin optional for better grip. I used a fancy…
P
Printables
Base plate for Makita router RT0700CX2J
A simple replacement plate for the router Print instructions nothing special
P
Printables
Circle Jig for Makita RT0700 Router (remix, splitted parts)
With the permission of the autor, c4t0r, here is my remix of his design. Same function, same size, everything. I did this remix to be even easier to print. 3 parts, no supports needed, no aliminium part needed The only tricky part is…
P
Printables
Makita RT0700 to Festool Vacuum Adapter
An adapter to use a Festool vacuum with the Makita RT0700 router