Liczymy pasujące modele…
Quadruped I Printable Quadruped Robot Step by Step assembly instruction. With code This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
Quad was inspired was inspired by #OttoDIY hat we all know ;) and MiniKame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery. Features 👩💻 Simple Programming with Otto…
MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…
Quadruped II Printable Quadruped Robot Step by Step assembly instruction. With code This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
This is my first attempt at an articulating dragon model. It is designed for printing on dual extruder printers. once printed it measures about 23 inches long but can fit on print beds as small as 150mm X 200mm. If you like this model…
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
It's a rupee I made in fusion 360, print in your favourite color and post a make! It only takes ~20-30 minutes
This is a rupee from the legend of zelda.
This Rupee by default is about 1" wide, just under 2" tall and ½" thick. You can scale it if you wish. I used 100% for the Silver, Gold and “Diamond” ones and then 75% scale for the basic colors (approx. 20mm x 26mm x 10mm). The display…
Rupee from the Legend of Zelda series with a keychain loop, comes with different size loops
rupee Print instructions Category: Toy & Game Accessories Summary rupee
I modify pieces to fit Tower Pro Sg90 servos, the original pieces didn`t fir correctly. Also modify the body to fits the Shield Javier de Isabel made for plug the nodemcu and all the servos. Category: Robotics
Quadruped II - v1.0 A place for the v1.0 files of This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code archives, or…
Robot Spider Quadruped is an educational toy that allows you to develop your interest in robotics, electronics and Arduinio as well as mechanics. The open Arduino platform allows you to modify your code and add new functionalities. Design…
droger's adaptation of andromeda's quadruped is awesome! I was planning on making my own design months ago. Life got in the way for a while, and BOOM, someone saved me a ton of time! A heartfelt thank you for that :) Small problem though…
New Beveled Versions!! Zelda Breath of the Wild Rupee. I made this model in Blender. 1in/3in rupee.
“Given two cubes of equal size, it is possible to bore a hole through one which is large enough to pass the other straight through." -Evan Scott, WWU, https://arxiv.org/abs/2208.12912 This is attributed to a bet made by Prince Rupert, and…
Go to home depot and get some 0.3in x 0.11in magnets, SKU#631954. Put them in the rupee, super glue em together and give to your zelda loving wife. Print Settings Printer: Prusa i3 Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66830/
Rupees from the following Legend of Zelda games designed to be as close to the real game as I could get: Tears of the Kingdom/Breath of the Wild Ocarina of Time (versions for both in the world and from chests) Twilight Princess Phantom…
In all the Zelda games, rupees have been the currency of Hyrule. They are gems of different materials denoting different values but all sharing the same cut. The denominations changes a lot in the early games. I think, it is now settled…
Accurate Zelda rupee from the game Twilight Princess designed in TinkerCAD. Its a little bit larger than the size of a penny and takes about 5 minutes of printing time for each individual rupee. An essential piece for any Zelda…
Simple holders for rupes polish pads and rupes polish bottles. Sized to fit into a systainer, printer with PETG semi-matte (ColorFabb)
My Website: Cheers 2 Engineering (google.com) This is a robot quadruped that works well with mg90s servos or any 9g servo. I used the thicker black servo horns that were given with the tower pro mg90s servos. 4-LegTop V2 4-LegFootV3…
In this model, four flexible arms were brought together and fitted with hand clamps at the ends. All parts are printed and no extra screws etc. are required. The arms can be used in different ways thanks to the central connecting piece.…
I've created a handful of breakable pot designs: Two (simple and patterned) versions inspired by pot designs in The Legend of Zelda: Ocarina of Time for Nintendo Switch 2 One (retro) version inspired by the pot design in The Legend of…
Here is the first mass produced version of QDRP-MK1, a.k.a. Quadrupe. These killing machines have been effectively used in First Civil War of Mars due to its adaptability to environment and core materials used in it such as a…
Little remix I made for your quadrupeds with tails, works with the original wist/hip armor. Please Note, this model is scaled up to 200x Original size
A zelda rupee with a cavity. It can either be used to store something on some magnetic surface (e.g. the refrigerator) or two of them can be used together for a full rupee. Depending on the printer you could require supports, but works on…
You can adjust the clearance/tolerance, between the stand and the rupee, to you desire via the “tol” parameter in Fusion360. While I am forced to mark it as non-commercial to be able to link this to the original model, do what you want…
The Dog Bot is a custom-designed, 3D-printable quadruped robot inspired by the modular ecosystem of HP Otto Robots . Built using CAD and exported in STP format, this design reflects the core philosophy of Otto— modularity, customization,…
He looks the same as he did before, but he can now fit on a string style light, the kind with the lightbulbs. He has an 8mm hole in his back and is hollow now.
A small four-legged walking robot driven by twelve micro servos. Each leg has three joints (abduction, hip and knee), every joint turns on a self-lubricating bushing, and an IMU keeps the body level while the legs trot. An Arduino Nano…
My Website: https://sites.google.com/view/cheers2engineering/ This is a robot quadruped that works well with mg90s servos or any 9g servo. Please note the app I used to design this made random scale adjustments to some small parts, so…
Unleash the future on your desk with this incredible robotic quadruped 3D print that captures cutting-edge engineering in stunning detail! This sleek four-legged robot STL model features articulated joints and futuristic design elements…
A small 4 cm long rupee I designed based on the Legend of Zelda series' currency. These print fairly well with no supports using PLA. Just the right size to fit in your own rupee wallet/bag. First published model! I currently print on an…
A Small Zelda Rupee Button. Printed in PLA. No Supports needet. Resize as you like.
This fortified medieval keep is the central structure of the Crupet Project , inspired by real fortified houses built in valleys for protection and access to water. The design emphasizes verticality and defensive architecture, with thick…
This project is a highly detailed 1:150 scale reconstruction of a medieval seigneury inspired by the village of Crupet (Belgium), known for its remarkable fortified keep and rural heritage. The model represents a complete medieval…
The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in curled edges, printing it standing on a side with a brim (yes, I tried that) didn't work either: It would tip over at around…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Part of the Crupet Project , this medieval water mill is inspired by historical mills commonly found in valley settlements, where water power was essential for daily life and production. The model features: Detailed stone structure with…
Zelda rupee holiday ornament
This is the 4th BCFerries model I made, the MV Queen of Prince Rupert
Fits Rupes BigFoot LHR15 polisher. Printed in PETG, 30% infill. A round version has been added — it uses less filament but hasn’t been tested yet.
This small medieval chapel is part of the Crupet Project , representing the religious heart of a rural village. Inspired by traditional stone churches, it features simple but authentic architecture typical of medieval countryside…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Originally published here: Quadruped robot by tato_713 - Thingiverse This was my final project for a postgraduate course in real-time operating systems (RTOS) applied on embebed systems. The objective was to make a project where we could…
Instead of printing the leg as a flat cross and then bending the legs for this robot, I did a remix where the leg can be printed in two pieces and glued together using Super Glue. The joint in the middle can face one of two ways which…
Zelda Rupee Hey maker! 👋 A classic Zelda Rupee inspired by the average proportions from the well-known Zelda games. Features: Clean iconic design. Easy to print, even without supports. Perfect as gaming decor, collectible, or cosplay…
Is a rooper from that zorldo game Print the file twice and snap pieces together, and it is made to fit a CR2032 battery and a 5mm LED. Tolerances have more precise printers in mind, so your results may vary. The graph correlates to the…
Beschreibung Das Modell des ehemaligen Rupert-Mayer-Hauses in Schönbach (Ortsteil von 35745 Herborn) ist das zweite einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der katholischen Pfarrei Zum…
Bigger electronics board for @TomKnox's Quadruped I. Fits 2x PCA 9685 boards and the larger 20A buck: Amazon.com : WWZMDiB CC CV Buck Converter DC 6-40V to 1.2-35V 20A 300W Power Supply Step Down Module for Solar Energy, Photovoltaic…
My 3 chickens have sand in their coop as a substrate. It is wonderful for them as easy to forage in, absorbs wet droppings, and keeps them cool in the summer. The big issue was picking up small poops. A cat litter scoop worked but not…
Self designed quadruped bot for mg995/996R and similar motors.
It's the crisis, spare 6 servos. This is all the modified parts to convert the 18DODF hexapod( http://www.thingiverse.com/thing:432829 ) to a 12DOF quadruped. the coding part need some heavy tweak ;)…
Soporte para aerógrafo truper, colocado sobre una pared lateral del mueble (Anclaje vertical) Relleno mínimo 20%
A light, fast, open-source research quadruped. Solo-8 has eight brushless actuators (hip and knee on each leg) with low-ratio timing-belt transmissions, so the legs are back-drivable and torque-controlled. It can jump, trot and recover…
Easy to print single-piece wall mount for Trupper water sprayer. Has bottom hole for water drainage. Does not require supports.
I made this model because I did not find another one that I thought was good. I wanted to make two slots for platines. One for the arduino and another one for the PWM driver platine. And the arduino should be powered with a 9V battery.
A quick remix to make the magnet pockets a bit shallower, in order to use thinner magnets (.25” dia x .075” thick) Concentric top infill looks nice with these. Remember to use supports under the magnet pockets. Use silk PLA for shiny…
Just a quick remix of two E3d test models
Remixed Rupee to have flat edges and a hole for putting on paracord
Designed by Jorvon Moss (aka Odd-Jayy), the Vantaphage is a unique 3D-printed quadruped robot inspired by the eerie appearance of a bacteriophage virus. More than just a walking robot, Vantaphage combines robotics, inverse kinematics,…
I created a main enclorer for the elctrronicz of a quadruped robo
Pasador para Caja Para Herramientas 3 En 1 Desmontable C/ruedas Truper CHP-1925R , normalemente se rompe con el uso , recomendacion imprimir con PETG y a habilitar soportes , recomiendo imprimir el pestillo separada de la bisagra , y…
A paper stand for diorama storytelling with Crupet coat of arms 🔗 Combine it with other models from the Crupet Project https://www.printables.com/@MakerT_3466360/collections/3366953
Este modelo es un remix del Prince Rupert’s Cube de @TomM, centrado en reforzar la pieza rupers cube.stl , que en el diseño original se rompe con extrema facilidad. He añadido pequeños refuerzos externos en los puntos críticos: son…
🦿 Quadruped Robot Leg Design (MG996R / MG996S / MG9965 Compatible) A modular, high-strength quadruped leg system designed for smooth gait control, durability under load, and easy integration with standard high-torque servos like the…
A quick remix to make the magnet pockets a bit shallower, in order to use thinner magnets (.25” dia x .075” thick) Concentric top infill looks nice with these. Remember to use supports under the magnet pockets. Use silk PLA for shiny…
Bigger electronics board for @TomKnox's Quadruped I. Fits 2x PCA 9685 boards and the larger 20A buck: Amazon.com : WWZMDiB CC CV Buck Converter DC 6-40V to 1.2-35V 20A 300W Power Supply Step Down Module for Solar Energy, Photovoltaic…
New Beveled Versions!! Zelda Breath of the Wild Rupee. I made this model in Blender. 1in/3in rupee.
Import this object into your slicer, slice it, and then put it in your USB Disk drive to print it! :D
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Description https://www.printables.com/model/1451339-quadruped-v10-full-project All relevant information about the project is in the original project. The only difference is that clubmembers get access to Step and Solidworks parts when…
Description Description https://www.printables.com/model/1443108-quadruped-robot-v06-w-code All relevant information about the project is in the original project. The only difference is that clubmembers get access to Stepparts and…
Project files for the Quadruped II model. Full project description can be found here: https://www.printables.com/model/1451339-quadruped-ii
Template for Truper Sander With this two-piece model, you can create your own sandpaper for a 1/4 Truper sander If one day you urgently need custom-sized sandpaper and don't want to go to the hardware store, or simply want to save money,…
About: The largest size perfectly fits a standard Walmart grocery bag, so it's great as an office or bedroom trash can. The smallest size is great for pens/pencils. But you can scale the model to any size you want, just make sure to scale…
A lifelong lover of the Legend of Zelda games, I made my own set of "Royal Rupees" with three unique shapes for unique value denominations discernable even by the visually impaired. Available pre-printed in a 192 piece set from my…
मलय घषण करन क लए अचछ सकत (मर नबर क सकत भ दख)। PETG म 10% infill क सथ परट कय गय। चडई 125 मम (य 4 इच) ऊचई 145 मम (6 इच) गहरई 70 मम (3 इच)। कपय लइक कर और कमट लटए। दन करन क लए सवततर महसस कर, धनयवद। Nice sign to make a price announcement (also…
A model for a 3 part mold for making a rupee. I used this to make rupee stress balls and props. No Supports 15% inner fill with 4mm walls
Print infil to 0% to make it hollow. then make a hole where the rupee ends and put a led inside. This is a rough prototype. I am powering up with a raspberry but you can do it with a LED and a clock battery Please post your makes! 😀
I have another model of just the rupee now decided to modify it and add a base Materials : Screw M3x8, it can be any long just needs to be an M3 Clock Battery CR2032 3V Battery holder for the clock battery Switch ON Off (outer size 1.5 cm…
Now its a bank, nuff said. Should be small enough to fit easily on a prusa mini
