Liczymy pasujące modele…
Passionate about aeronautics, the Rafale is one of my favorites plane, so it was a pleasure for me to modelize it. Designed in several parts, this model can be printed without difficulties and with reduced supports. The canopy being…
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Passionate about aeronautics, it was for me unthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model is designed with the double slide…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Designed in several parts, this model can be printed without difficulties and with reduced supports. The canopy being designed separately from the main model, it will be easy to print it in a different color. I tried to simplify the 3D…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
The g-code was sliced for a single color change. Prusaslicer’s default .2mm quality setting with 15% infill. Be careful when removing print from PEI sheet, the outlining is two perimeters wide and could break from print. STL file included…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Dassault Mirage 2000 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
A door for Fantasy Flight's Imperial Assault board game, set in the Star Wars universe. You can slide the game's cardboard door token in this model's slot and use it in your game. There is also a multi-part version that allows one to…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
The RX-200 Falchion-class Assault Tank was a heavy tank utilized by the Republic during the Clone Wars. This hovering tank stood out within a Clone Army that usually used walkers. Its heavy beam ion cannon was mostly used against…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
When you need more than the seat post adjustment can provide, adding blocks attached to the pedals to bridge the gap. Don't pedal on your tiptoes, print some pedal blocks that snap onto your existing Assault Fitnesss Airbike pedals.…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement battery cover for the AssaultBike Classic bike. I recommend printing it in PETG, so the clip can flex without breaking. I have not tested it on anything other than PETG, and it works great. It is a simple, quick…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mount fits the assault bike neck and allows most simple push-in suspension arms to be used, similar to this type . Much nicer having your tablet or phone in front of your face, rather than hanging your head. It should be printed in…
Wydruk około 13,94 €–17,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is what happens when Benchy enters public domain during a mini robots design contest! In the spirit of Benchy's original purpose as a benchmark test, this variant will also help you test out settings for printing my other jointed…
Storm Guardian Assault unit from Storm Guard Suppression squad. Full squad available at https://matstation.com/
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. A few of the parts, are sadly missing. If anyone…
An influential ship, with a storied history and record, the USS Tripoli is a great little desktop model. The model aims to provide a sufficient level of detail to be realistic and interesting as a desktop model, but not so saturated as to…
Assault Phaser from Star Trek VI: The Undiscovered Country Highly detailed model of an Assault Phaser from Star Trek VI: The Undiscovered Country. 11 joints are needed to attach the pieces and 4 rivets for the slide. I reprinted the…
The Dassault Rafale, a French multi-role jet fighter designed and manufactured by the Dassault Company. Serving not only for home soil, but also fighting for the Egyptian, Indian, and Qatar air forces. A gorgeous plane from every angle, I…
I wanted to make an RSH-12 3d model just to test my CAD/designing skills and here we are. On the internet there are plenty of RSH-12 3d models including printable ones but for me it was too boring to make a full plastic brick only for…
It is oft required for the Legions of Rome to deploy their hastati and Principe in a rapid platform that can also lay down substansial fire support. Enter the Kimera Armoured Transport. Equipped with a hull mounted auto grenade launched,…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Print with 0.15mm layers from any material. 100% infill recommended though it probably prints it filled in anyways due to the parts size.
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
This is a dummy 13 SCAR (Skye's assault rifle) from Fortnite that I made using my dummy 13 accessory grip which you can find here: https://www.printables.com/model/1289048-dummy-13-accessory-grip Enjoy!
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
MCRN Scirocco Class Assault Cruiser from The Expanse. It measures about 495mm from the tail to the tip of forward antenna. Almost all the pieces were printed not using supports. I used supports on three of the mid-section structures. The…
They include containers, terminals and doors (open and closed). For the design of the doors, I didn't quite stick to the templates. However, the cardboard doors, available in the game, can be used in the printed version. The terminals…
Includes dice tower, built-in tray, and a storage tray for unrolled dice. Note that this was built for 19mm dice, and Imperial Assault uses 17mm dice, so it can be safely scaled down to 90% (more specifically, 89.5%) of original size in…
Incase Prusaprinters glitches out again you can find it also here: https://www.thingiverse.com/thing:4881488 This gun shell is a replica from the Operation Wolf Arcade game. It is assembled much like it's sheet metal and steel father, but…
Ak-47 Assault Rifle Replica, one piece model! If you like the model please leave a comment and a make! Disclaimer: This 3D model is provided on Printables for personal and lawful use only. It is intended exclusively as a toy, prop, or…
Various aircraft have been described as the “first fighter”. Like a lot of discussions around technological firsts, it’s a somewhat pointless debate since the answer depends on what you consider important. The first purpose-built fighter…
TentaSteel Assault cyborg from "Tentastell Strike Force" models pack. Find out more at https://matstation.com/
Assault Phaser Holster from Star Trek VI: The Undiscovered Country Holster for the Assault Phaser Sand the pieces. Align and glue holster1 and holster2. Sand again. Prime and paint. Repeat as necessary..... Glue the clamp between the…
* UPDATE * Thanks to MiZer1981 for his suggestion to combine 2 parts for better fit, I have removed Bottom Part 1 and Interior Part 1 and combined them into Bottom Part Redux. Should make the printing and gluing easier. * UPDATE * I…
Ripped straight from the fallout 4 game files. 32k triangles 98k vertices
My very first foray into applied 3D modelling, and I'd say it turned out great! Like the title says, this is the “Assault-style” Imperial helmet from Squadrons, useful if you're planning to build the following outfits: Hazard armor and…
This is one of the blasters from the Transformers Power of the Primes series. Best printed on an SLA/DLP printer for highest resolution. Check out all of my transformers guns! Transformers CW sunstreaker gunsword -…
StuG III Assault Gun Model Scale: 1:72 The StuG III (Sturmgeschütz III) was the most-produced German armored fighting vehicle of World War II. Originally designed as an infantry support assault gun, it later proved highly effective as a…
Made a display stand for the gorgeous assault phaser by Voxel3. The indent where the grip rests is tight and is able to hold the pistol upright for me without needing the forward leg, but the leg just provides piece of mind. Buy prints of…
Ripped straight from the Fallout 4 game files. 21k triangles 64k vertices
Made this for fun, takes a 1/2 rod Category: Props
1:42 Sci-Fi battle tank, a bit late but was meant for Phantom Menace anniversary. Happy late Star Wars day!
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Reposting of https://www.thingiverse.com/thing:3219077 since the files were removed from the site. The files were removed and were made as an Etsy listing for R5 onwards. It's not illegal to do so. CC-A-NC-SA allows me to redistribute the…
Federal Assault Ship model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
This is a dummy 13 Heavy Assault Rifle from Fortnite that I made using my dummy 13 accessory grip which you can find here: https://www.printables.com/model/1289048-dummy-13-accessory-grip Pictures coming Enjoy!
Ripped straight from the fallout 4 game files. 85k triangles 256k vertices
Hi Donny, I found a version I had that is the MK2, I've Converted yours as in the MK1 But they quit large due to the neck hole in MK 2 being 17- 18cms across to get a large adult head in. Yours the Mk1, I think its sized right but will…
Le Rafale de Dassault Aviation est un avion de combat multi-rôle — qualifié d' «omnirôle» par son constructeur — développé pour la Marine nationale et l'Armée de l'air françaises, livré à partir du 18 mai 2001 et entré en service en 2002…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
This will organize your Imperial Assault board game and all wave 1 figures.
This model provides a base for an AT-AT miniature, to be used in the “Heroes of the Aturi Cluster: Ground Assault” cooperative campaign for the X-Wing miniatures game. The size matches the one proposed in the current Ground Assault rules,…
Feb. 24, 2025 V1.0b9: First release on printables Based on DUMMY 13 1.0 - Nov. 2024 Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
The Qu.A.S.A.R. is another of my original creations. For use with 4 inch action figures like modern G.I. Joe. I created this about a year ago and used it as an experiment in “greebling” a vehicle it was a lot of work but I enjoy how it…
for those who like ak-47's, I made this model for you! (info below). Please comment and make this model.
An assault rifle seen used by Gouf Custom in Zeonic Front video game. Supposedly based on the new MMP-80 Zaku machine gun, this weapon features a more rigid buttstock, scope mount, heavy-duty barrel. In turn it has a slower rate of fire…
The Dassault Rafale is a French twin-engine, multirole fighter aircraft designed and built by Dassault Aviation. Known for its versatility, it can perform a wide range of missions, including air superiority, ground attack, reconnaissance,…
Francouzský jednomístný stíhací letoun z období první světové války.
Printed parts should be uploaded in the correct orientation to print. Check images for fan duct orientation, assembly and built in support locations. Be careful what fans you buy. The gdstime 4010s work flawlessly but the fabreeko hb…
Точная модель автомата Калашникова (АК 47) смоделированная в программе Blender
Scale to whatever size you require, Best printed on a resin printer Tested and printable on my LD-002H with Anycubic basic resin
Remixed from Obstacle crate - Imperial Assault by Norseknight. Edited to be solid and have a spot on top to hold the crate token from the game. Inspired by thatoneguy314's Imperial Assault Terminal Upgrade that allows you to use the…
Assault frigate Mk1 type 6 scaled for Armada. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will get free and exclusive model, Etsy shop…
Ripped from Fortnite using the FortnitePorting tool: https://github.com/halfuwu/FortnitePorting Plus a few other tweaks so it would be printable. I recommend finding a different orientation to print it at, and use tree supports. I created…
캐터필러 L / R @2 부품 @@관절형 보트의 경우 혼합물의 출처를 참조하세요.
Assault Frigate MK1 Type 5 scaled for SW:Armada. This model is designed for resin 3D printers. It will print good at 50 micron AA2 or 20 micron no AA. If you like my work and want to support me you can visit my Etsy shop:…
I made this before, but I did not know there was already a rear sight and a bunch of other things. pls give requests.
I took the 3D scan of my head at put it on an octopus body. Enjoy the horror Print instructions Unassociated tags: human head Category: Art Summary I took the 3D scan of my head at put it on an octopus body. Enjoy the horror
This deployment dashboard works well in conjunction with the character miniature bases. The dots in each slot tie directly to the identification dot on the bases. There is a deep vertical slot to hold the deployment card and a shallower…
This is a remix of the Player Dashboard by Farlei. It is has a larger card space to allow for sleeved (103mmx128mm) cards and a slot on the side for Condition Damage or Strain tokens. Printed with PLA Layer height: .15 Perimeters: 3…
Update 15 Sep 2022: Matt C. has fixed some mesh errors in the original print and allowed me to add his fixed stl to this file. His original fix is here if you want to like that too. Thanks Matt! A door for Fantasy Flight's lovely Imperial…
A simple Imperial Assault player dashboard: Large slot for 1 Hero sheet 3 slots for small cards: hero, item, supply, reward, etc. You can fit at least 9 small cards (more if overlapping cards) I created this dashboard to use with the…
Token Holders for Star Wars Imperial Assault. 2015-06-12 - For a more modular version see: http://www.thingiverse.com/thing:877080 , for which the default config is Imperial Assault Category: Toy & Game Accessories
Assault frigate Mk1 type 1 (2 variant) scaled for Armada. Best printed at 20 microns AA2. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will…
for those who like M4's,I made this model for you!(info below)Please give your opinion and tell me what I should do next
I saw the mesh wasn't quite right so I've tried to fix it. Prints upsidedown, May require a few supports for the details sticking out the door
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
if you like M16's and nerf guns, this model is for you! this includes: handmade barrel, handmade stock, mag, and sights.
Hi everyone, I designed a simple BCS keychain. On the second photo that I print is re-scaled to %125. For better quality, you can make it bigger. Have fun!
Better Call Saul Logo Scale as you wish
Another cool helmet from The Killzone game franchise. Please note this was originally a peakura .PDO file, that I have converted here to a printable STL file, Cheers Jace
I made this for those who love m4's, i made this advanced M4 model. (info below) please comment and make on this.
"I need a weapon." Print with supports The armour in the pictures made by daokouxiaxingzou Please post makes :)
This is a 25mm x 25mm x 25mm cube. Recommend using 3 perimeters.
I loved both designs that this was remixed from for different reasons - the round ones were clean, but they overlapped the spaces. The square ones fit the spaces, but didn't look as nice to me So... I combined them both... Category: Games
Two different types of connectors for the Sauls barrage kite. Plans for the kite originally in DraMa, and now also availabe online on kite.builders. Can be printed in PLA and TPU. I sliced them with Cura (see also picture). I suggest to…
The Order assault rifle from Borderlands 4, built for printing and display. Multi-part design with solid grip ergonomics, so it actually feels right in your hands. Get your copy of Borderlands 4 here.
adds a magazine, a barrel, a reflex sight, a vertical grip, a stock extension, and a rail lift.
This is my storage solution for (almost) all the tokens and cards for the Star Wars Imperial Assault board game, enabling quicker game setup and easy access. I've created these boxes using my parametric design , customizing the boxes with…
FREE Promo models for our latest Kickstarter terrain set, DarkHyve Assault! https://www.kickstarter.com/projects/saucermenstudios/darkhyve-assault?ref=aar0x5 Want the full set? The DarkHyve Assault bundle is a large collection of 3D…
These are easy-to-print 3d-versions of the dense and elevated terrain for the Ground Assault missions of the coop campaign “Heroes of the Aturi Cluster” (for the X-Wing miniature game by FFG/AMG). The goal of these models was to leave the…
These very cool breathers fit perfectly well in addition to aTank Trooper Helmet. Sorry Helmet is not available here on Thingyverse All credit to Geoffro for creating the Tank trooper Helmet which can be found here.…
Assault mech from the game HAWKEN. The zip file contains printable parts. Legs, cockpit and arms are movable. For all parts printing with supports from bottom is adviced. I printed my make at 25%
Future - Space Soldiers Assault Team for 1:72 wargaming Category: Games
The Gozanti Class Cruiser/Carrier from Star Wars/Mandalorian
A mix of a: https://www.thingiverse.com/thing:763622/files In comparison to ( https://www.printables.com/model/1203695-benchy-speedster ) Added something similar to GAU19 (-ish) that fully rotates All terrain wheels that is…
The Kerel-pattern assault carrier (UNSC three-letter classification: CAS-class assault carrier) is a design pattern variation of assault carriers employed by the naval forces of the Covenant. The Kerel served the Covenant (and continues…
for those who like exotic guns, i bring you an exotic attachments pack. (info below). please upload makes and comment.
