Liczymy pasujące modele…
A mount for the first version of the Picostation, with direct access to the SD Card slot, bootsel button and activity led. The Picostation must use the feet provided, and seat in a slanted way. This allows for the SD Card to be accessible…
I made these two models quite some time ago about a year apart, they were commissions way back then and were a great excuse to practice sculpting, the sad version being one of my first sculpting projects ever. note that while the…
SCP:SL 05 Keycard The QR code should work and it will detect you to the scp wiki Filament: PLA (black and white) Supports: No Infill: 100% You will need to add a color change on the on the ninth layer or the layer that the graphics appear.
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
SCP 049. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is replacement cover for Parallel I/O (or parallel port) of Sony PlayStation 1. I tried this on model SCPH-550X, but most likely it will be compatible with any model with parallel port (from SCPH-100X to SCPH-750X). Latch is fully…
Not wearable . Sculptural rendition of SCP-049’s plague doctor face as a mask. Detailed scratches and texture to mimic the chitinous material of the SCP’s face. Best for high resolution printers.
SCP 096. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
I tried using RetroGameRevival's file PS2_2.5inch_HDD_Caddy_GameStar_Full for my PS2 system (SCPH-39001) and it was 2mm too wide on the right and the HDD needed shifted left 1mm in order for everything to line up. Rather than trying to…
Item #: SCP-682 Object Class: Keter SAFETY WARNING: IN CASE OF CONTAINMENT BREACH FROM THE 3D PRINTER BED IMMEDIATELY DEPLOY MTF * DATA EXPUNGED * TO RECONTAIN THE ANOMALY. SCP-682, we all love that hating creature so I decided to…
the iconic concrete figure who really likes your neck
SCP-999 appears to be a large, amorphous, gelatinous mass of translucent orange slime, weighing about 54 kg (120 lbs) with a consistency similar to that of peanut butter. On the real note, a very cute little fella. Gonna need supports for…
I was looking for good SCP logo with molle mount, but I couldn't find one, so "I" made one myself. If you want to, you can change filament on layer 22 if you print 0,22mm layer height, to make the logo a different color. Rafts: Doesn't…
Item #: SCP-682 Object Class: Keter SAFETY WARNING: IN CASE OF CONTAINMENT BREACH FROM THE 3D PRINTER BED IMMEDIATELY DEPLOY MTF * DATA EXPUNGED * TO RECONTAIN THE ANOMALY. It's an upgraded model of the SCP-682 I made before, but this…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
If you want to support me, you can send me some crypto and I'll buy a watermelon usdt(TRC20) - TPHUvYZXHKuB6Pj7wavXpkKApEzDJC83uN bitcoin - bc1qxh24prkt4mn6qv9jpyvwggnqd5nkrnx3qqsg94 ethereum - 0x9338A883Ac1bb7c75d7f6ca1A7D53c4021523369…
A patch with the SCP Logo on it Add pause to change filament at layer 6
Logo of this club, with different heights so it is possible to color print in a single material printer as I did. Used Fillamentum's PLAs. The lion in the back has a spot to insert this logo which can be found here . Gcode files are…
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
SCP 939. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Not wearable . Sculptural rendition of SCP-049’s plague doctor face as a mask. Smooth and untextured for low resolution printers.
Summary Since every other USB-C mod didnt fit my needs, I decided to create one on my own. This prototype is currently in green - will try to print it in resin in black or grey. PARTS USED: RePSX variant (white pcb in my case): PDC004-PD…
resize the stl for your needs. for keychain without additional metal rings 118% worked good for me. (does not mean it will for you)
I've been asked to print some football/soccer keychains but haven't found nothing useful, so decided to design my own to print. I've made version to be printed on a bambu labs printer with AMS and other to be printer on single color…
Lion stand to show off the Sporting (SCP) Logo . A version without the cutout for the logo is provided as well. I hope you like the models! If you want to support my work you can Buy me a Beer !
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality) (!!Warning, if you want to print this with resin, the center on the cutout side will warp after post-curing.!!)
I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Eta-77 ("Spheres Within Spheres"). SCP logo by Far2; Eta-77…
I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Alpha-9 ("Last Hope"). SCP logo by Far2; Alpha-9 logo by…
When using your Sony PS2 fat vertically, the SCPH-10130 AV Multiout can sag, putting undue strain and by extension stress on the cable and its connections. This strain relief support is a simple “cable saver”, turning the tide of the war…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
This is a remix of Codex's mounting bracket for the SCPH-10350 version (and possibly other versions) of the PS2 Network Adapter for use with the SATA upgrade board. I printed the original model and it came out a little strange on my X1C.…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
Gridfinity is the amazing system we use to organise our desk, drawers, tool boxes, etc, but what if you could take a bin from your desk, put it in your briefcase, and go about your day? INTRODUCING, THE ALL NEW SCP THEMED GRIDFINITY…
A simple shield to prevent the Retro GEM and accompanying ribbon cable / WiFi antenna + cable from coming on contact with live AC power should the antenna or Retro GEM come loose. Probably an overcautious precaution, but I feel better…
SCP 4666. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
This is a remix of the PlayStation 1 xStation ODE microSD mount. It has been modified to fit an microSD card reader for the Picostation. It prints without any supports. This fits this microSD card mount and others similar to it:…
This bracket was redesigned for the PicoStation, and covers only the 1XXX “phat” PS1 (PU-8) simply because I don't have another motherboard that is compatible with the mod itself at this time. Lots of 7501s, but sadly none that support…
Special containment procedures: None Description: This SCP token has been 3d printed. It seems to have no unusual properties other than a slight increase in attractiveness when on the person of an operative.
I would recommend printing with smoothing and color change. Actual recommendations about parts assembling - they have to be glued together with cyanoacrylate (gel consistence) or similar glue. Circular grooves on the bottom of parts is…
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
Filament Change / Dual Color (AMS): Black, White, Red PLA. Layer Height: 0.08 mm. Infill: 15% Supports: None needed.
Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm)
For fixing module screw - M2, for fixing panels - M2 or M3
I bought a RiscPC slice from eBay that was an absolute bargain, it was however missing the spring from the right hand side of the flap and on the left hand side the clip that retains the flap was missing. I fixed the missing sprint with a…
Screws for fixing the panel - m3 Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm) and HW-774 (Chinese copy with worn-out markings) Screws for fixing module - m2 (6-8mm)
AVR 6 pin ICSP socket cover (You can use it for non-AVR socket purposes, I won't judge). Slides in and out easy, and has a small lip so you can pull it out using your nails. Doesn't fall out when shaken upside-down but given that it's an…
make it shiny red
SCP Cup Coaster. Created in TinkrCad. To see a SCP Logo I prefere to use a AMS System.
lore coin from popular youtube show unus annus
Bitte mit hoher Fülldichte (min 90%). Und wenn es geht nimmt eine aus Metall. Habe es mir nur gedruckt um es schnell zu machen.
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
Minor changes to the original moved the top clip down a few mm to hold the controller more securely raised the plinth for the grip a little for the same reason I also added a 3mf that puts two holders in the space of a shelf for the…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality) (!!Warning, if you want to print this with resin, the center on the cutout side will warp after post-curing.!!)
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm)
This is a remix of the PlayStation 1 xStation ODE microSD mount. It has been modified to fit an microSD card reader for the Picostation. It prints without any supports. This fits this microSD card mount and others similar to it:…
Gridfinity is the amazing system we use to organise our desk, drawers, tool boxes, etc, but what if you could take a bin from your desk, put it in your briefcase, and go about your day? INTRODUCING, THE ALL NEW SCP THEMED GRIDFINITY…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
Has eye inserts which can fit small LED tea lights, so the eyeball can light up. Prints can take up to 500g for the eye pod itself. Shouldn't need supports. There's a hole on the underside for a custom thing I did but that can also print…
Minor changes to the original moved the top clip down a few mm to hold the controller more securely raised the plinth for the grip a little for the same reason I also added a 3mf that puts two holders in the space of a shelf for the…
SCP 4158. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
SCP 3199. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
The QR code wouldn't print right so I removed it. You could instead print a picture of the QR code and glue it to the spot.
I made this model in tinkercad a while ago. I printed the body in orange TPU filament and the face in black PLA filament, both of which at 270% but you can print it at any scale just make sure they are both at the same scale. The mouth…
SCP 500 Replica. Created in Tinkercad This project has 3 files which are shown in the pictures. WARNING: Do not let small children play because of the small parts!!!!
This is a remix of zaxour's design, the differences are so it can work with a popular Aliexpress version of the Xstation that comes with white plastic risers. Original: https://www.thingiverse.com/thing:4878898 This version has cutouts…
I would be happy if you could leave a review or post your make! I created this card fully in the Prusa Slicer You can easily adjust the logo or names in the slicer itself. no need extensiv 3D Knowledge :) Everything Logo I used in this…
SCP-5956 AKA the REISNO Cannon from the SCP universe. This is a work-in-progress because I intend to eventually model the Paradox iteration (this is the Prime iteration). (Technically, this is a R1340 Wasp IC engine.) Category: Buildings…
Scp 4975. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Mal0 (SCP-1471-A) is sprawled possessively across your bed like she was born in it. Towering, lethally curvaceous, her glossy void-black fur drinks every photon, long liquid-shadow hair spilling over the pillows she’s already claimed,…
Plz comment if there are any problems, might need some sanding so 3069 is glued properly
This is a back cover replacement for the early PlayStation 1 systems with RCA output.
The SCP Foundation's most well-known Mobile Task Force!
An articulated figure based off the scp mtf unit called "RedHerrings", comes with m16 and rpk.
a card holder with an SCP logo on the back should fit any standard card. yes it looks scarely similar to NISAkuh's model which i realized after the fact, so no i didn't steal it (please give feedback so i can improve my models
If you printer does not support multiple colors, then you will have to print it as multiple parts and glue it together. Please do not re-upload STL or any other mesh version of this project. I upload STEP only, because I want it to be…
Wearable SCP badge with magnets that can be applied to lab coat or shirt to customize it without damaging material Pause print at layer 9 and insert three 10x15x3mm magnets. Other three magnets go inside of your cloth of choice. I myself…
I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Epsilon-11 ("Nine Tailed Fox"). SCP logo by Far2; Epsilon-11…
Update 2/4/23 - Added a variation with a rounded end and flat top. It should be printed upside down, and eliminates the sharp edge at the bottom that could cause irritation during use. I measured the important bits and then made two…
The Church of the Broken God Coaster from the SCP.
I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Alpha-1 ("Red Right Hand"). SCP logo by Far2; Alpha-1 logo…
![SCP Token [Object Class: Safe]](https://media.printables.com/media/prints/398625/images/3330371_e19a2478-37e5-44c6-841c-797b97d07213/img_20230215_183200.jpg)
