126 modeli
This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…
This stand allows you to store your Meepo Shuffle V4 (and possible other longboards) in a vertical position without the need to drill into your wall to install a mount, or even lean it against the wall which could scuff or dirty it. There…
There are two versions of the insert: Single piece - one big piece, which covers the entire box with 5 card spots, scoreboard and game board. TopBottom - it divides insert into 2 pieces - the bottom one holds cards for main game and…
There is 3mf file which you can difrectly print from printables on MK4S printer.
A replacement card tray fitting a common manual, plastic card shuffler. After losing our original card tray (how does that happen?), and continuing to use the shuffler, spewing cards everywhere or jamming, I decided to go ahead and make a…
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
This is not really a remix, this is simply a translation of the file names and instructions for the Playing Card Shuffler by farfadet53. I have not yet printed this myself, once I do I will update this thing with photos. If it doesn't…
Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…
Print as you normally would. I used PETG @.2 layer height with .4 nozzle. They should be glued in place on the original model directly above the center of the roller. Thanks for the original model @LukasCenovsky
Took the OG card shuffler and simply made it a little bigger so that you could one-handed shuffle an entire sleeved commander deck. No supports needed. Feb 2024 update: Based on a great suggestion by @SaschaSpieker_445421 in the comments,…
Inspired buy the gorgeous wood version available at Wheel Fanatyk: https://wheelfanatyk.com/collections/lacing/products/wheel-fanatyk-nipple-shuffler (if you build wheels, you will definitely want to read Ric's awesome blog, which you can…
I've designed a compact insert for the boardgame Forest Shuffle, who fits the basegame and the first expansion with sleeved cards (I used docsmagic and swan panasia sleeves). The Insert contains of 5 cardtrays (3 of one type and 2 of…
I have several expansions for Dixit and the cards are too large and cumbersome for my hands. This is a remix from both Lukas Cenovsky's and LightValen's shuffler and cogs. I increased the angle of the card feeder and changed the overall…
Updated on 12/22/22 Filleted the corners to make it nicer to carry without pointy edges and to make it easier to print. Updated on 9/23/22 After receiving feedback, I have updated the file to make the shuffler much easier to use and is…
97x71 version of the original project
I've recreated the single TPU O-ring because you only need 4 + the 2 wide rollers.
O-ring for the shuffler, in case you want to try to print it in TPU. I've gotten decent results with 95A TPU, but it's possible other materials might be a bit better (chime in in the comments if you have any suggestions!
These are simple o-rings created inside PrusaSlicer. I made them slightly larger than the o-rings Lukas used. They are 12.5mm diameter inside and 19mm diameter on the outside (2mm thick). Printed w/ 100% infill with a 0.6mm nozzle, they…
Edited the shaft so that it works with small ~1.5 cm (~0.6 inch) rubber bands. Works great. Thanks to @LukasCenovsky for doing all the hard work and then sharing the scad file to make this possible.
I got my game second hand, and it didn't have any insert inside, so I set out to design my own, as I couldn't find any that I liked. This insert will: Fit the cards with sleeves of up to 92x62mm Fit the base game and should easily fit all…
Plenty of space for all the cards available in Forest Shuffle. Two card towers can be used for storage and for an in game card draw tower. Print as many card dividers as you need for the organization. I don't have my cards sleeved, and…
This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…
This insert fits the Forest Shuffle (Mischwald) base game and both expansions (Alpine and Woodland Edge) with room for more if they are released. According to BGG there are two box sizes in use. I have created a separate model for each. I…
Hello makers, I have designed this organizer for Forest Shuffle to replace the horrible original one. This design is compatible with sleeved card as shown in the pictures. With this organizer you can split the main deck already in 3 parts…
This is a Fidget card shuffle based off of the Lautie shuffle. I really liked my metal version but wondered how a plastic one would feel, so I made my own. The file contains both halves, and you will need 12x 4x2mm round magnets (I bought…
this is a super simple remix of a remix. I took a spacer from a v2 remix ( https://www.printables.com/model/391943-card-shuffler-for-mysterium-and-dixit-sized-cards/files ) & resized it to fit this V3 Crank to help keep the gear from…
Update 2024-12-22 : Added a new version with more space for extensions and wider space for sleeved cards. I didn't like that the cards had to be divided into three stacks. So I built this insert where you can store the normal deck cards…
!!! I made this remix from the 93x71 files, please make sure the gears fit on other sizes!!! There are 2 different nuts, I think you only need one of the smallest for the handle shaft Make sure you have your tolerances tuned!
This is a wider version of the "cut-out" remix of the "Spielkartenmischer / Card shuffler" to support wider cards such as standard width "Bicycle" branded playing cards. I've also included a slip-on ramp for each side table that…
A neighbor lost the plastic tray that went inside the automatic card shuffler we always use to shuffle cards with. I took measurements, designed a replacement, and printed it. Now you can use it too! Features Fits most automatic card…
Here is my design of the famous Shuffleboard game! It's the first game of a series of games I'm gonna be releasing the next days. I hope this will bring some joy in these tough days and counter your boredom. You can extend the playing…
This remix adds fillets to the edges of the shuffler to reduce the chance of warping during printing. Otherwise it's identical.
Enough space for all expansions (Alpine, Woodland Edge, Exploration). There is enough room for sleeved cards. Just print the bottom part and the top part. The area for the scoring sheets might be a bit too low, as I don't have a full…
Baumkarten halter für Mischwald. Ein einfaches stecksystem für einen einzelnen Baum + anlegekarten. Die größe ist optimiert so das Karten mit Hülle genug platz haben. mit PLA gedruckt 0,2 mm Schichthöhe keine Stützstruktur Umrandung:…
Insert for Forestshuffle / Mischwald DARTMOOR or SMOKY MOUNTAINS Enough space for sleeved cards. Separate slots for forest cards, winter cards, caves, scoring sheet, clearing and optional: pencil. Enough space to also accommodate Exmoor…
Forest shuffle insert that supports the American Standard sized titanshield sleeves. The card trays are also removable, and should be easier to print on smaller printers. I wanted an insert that could hold the sleeves I put the cards in,…
A small adapter that fits into an automatic card shuffler, allowing it to shuffle mini (44x68mm / 1.73 x 2.68in) board game cards. Useful for Ticket to Ride , 7 Wonders: Duel , or any other game that asks you to shuffle those awkwardly…
Model to be printed with the small side to have a good print without too many overhangs. Slicer should decide for the correct side autmatically. Multiple Holders needed for the game, as every tree with cards underneeth should have one…
My kids broke the crank arm off my card shuffler which I like to use for deck builders (especially when you are trying to shuffle only 10 or 12 cards at a time). So I measured the pieces and used my poor CAD skills to make a new one. This…
Organiser sized for sleeved cards. Can fit the base game plus two expansions.
This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.
Insert for the Board Game “Mischwald/Forest Shuffle” and the 1st(?) Expansion Base Cards are in two, Alpine Cards in a third slot. Reference, Winter and Cave Cards are in a fourth one for easy setup. The score pad and the game board lock…
The card holder dimension is sufficient for sleeves.
This is an an adapter that keeps smaller cards (in this case, Wyrmspan cards) from rotating and getting caught up when being shuffled using a hand cranked automatic shuffler. This isn't a perfect solution, but works well enough. The…
If you've had the experience of trying to shuffle your 100-card double-sleeved Commander deck and spraying your cards all over the table and floor, this handy little aid can help prevent that from happening again! Currently on iteration 4…
Mexican Train Domino Stand
Inlay für das Brettspiel Mischwald inkl. Alpin Erweiterung passend zur Deutschen Version von Lookout Spiele. Die Kartenhalter lassen sich entfernen und können direkt auf den Tisch gestellt werden. Der Kartenhalter muss 2x gedruckt werden.
This is a carry / storage box I made for the Card Shuffler by Josh-3D . Shuffler, This box fits the tall shuffler, so it will work for both the tall and standard shuffler. I suggest printing the box using PETG or better for durability. I…
Boardgame Insert for Forest Shuffle (Mischwald) Fits sleeved cards only tested for German Version The text (Mischwald) was added with the slicer software, the step file does not have a text on it. Printed my first runs without a bottom…
Forest Shuffle insert / card holders I designed this wanting to have card holders for those people who can't hold all the cards or want to view them easily. It's a very practical insert 4x Card holders for all the cards (doesn't fit…
It’s a replacement tray for this card shuffler I bought for $0.25 at a garage sale a decade ago. Category: Toy & Game Accessories
This is a remix of eerko's insert for Forest Shuffle designed to fit in the English box, since the dimensions seemingly differ from the German version. This version fits into a box with internal dimensions approximately 21.6 by 15.7 cm.…
These cheap manual card shufflers are all over Amazon and they work well - for as long as the crank handle lasts. One extra handle is provided, but even so the handles break before very long. The shuffler itself will last a much longer…
I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…
Found a first gen ipod shuffle at the thrift store for $4. Decided to make a keychain top to be able to throw this on my keychain and have it all times. Category: Audio
I have modified the Card Shuffler Conveyor Wheel to fit for 32mm x 3mm O-ring seals.
A shuffler mechanism is a fun, unique, and lightweight way to add motion to your robot or other projects. It uses a drive cam system to move feet in a heel-toe motion for propulsion. There isn’t a lot of documentation about this, so I…
Just enough room to include the Alpine expansion. Supports sleeved cards although a bit tight with my Sleeve Kings 8807's.
This clever 3D model is inspired by an ancient rearrangement proof of the Pythagorean theorem. Instead of just squares, this version uses triangles tucked inside one large square. When you shift the triangles around, they perfectly…
This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.
The clear plastic tray that holds the cards in our card shuffler broke. I designed a replacement that fits well. I printed in PETG because that what was loaded into my printer at the time but really anything will work. I printed on it‘s…
Additional part for crank arm to make it spin easier No supports, print vertically Takes about 10 minutes to print and you have to push quite hard to get it on, but it will not come off afterwards.
Phrozen includes a top cover for the vat, which is great, but 2 undesirable things can still happen: The FEP on the bottom of the vat can get scratched if you are not using a vat Light can get in through the bottom, curing resin that you…
This U clip allows a fourth generation iPod Shuffle to be attached 90 degrees to the direction of the Shuffle's own integral clip, eliminating the common situation where it winds up sideways (with the controls flipped accordingly). Print…
The Print 'n Shuffle has been designed as print-in-place piece, and can be quite the stresstest for any printer. Make sure to let the print cool thoroughly before snapping the joint! Made for use with A7 paper size, but works equally well…
Modified parts for the awesome manual playing card shuffler from user RockstarAlchemist. The goal of this remix was to reduce the amount of plastic needed, also to help make the shuffler a bit more efficient --6-5-17-- Added a modified…
This crank improves the usability of the Amigo Card Shuffler since it features a rotating handle with knurled surface or can be used as replacement part. It also might fit to similar machines of other brands. The axis is 4,3 mm square. It…
Nice detailed shuffle tower the obj is a quad mesh for your own remix Have fun
I recommend using supports for the inside. This is a quickly made shuffleboard puck for an engineering project.
Basic cap for a table shuffleboard puck, simple and easy to print. Recommended to use ASA/ABS or equivalent along with an infill that is 50% or more due to the impact the cap will experience.
This organizer supports the Forest Shuffle Dartmoor stand-alone game and the Exmoor expansion. It has a much larger scorepad opening, and the exterior is resized to fit the slightly different box size compared to the first game. Card…
Charging stand for iPod Shuffle and usb case
Kids = lost pieces… after getting frustrated that the batteries kept coming loose while shuffling cards I designed this battery cover. Printed using just PLA and .4 nozzle and .20 height and normal supports. V1 works… when it breaks I'll…
Shuffleboard Trophy Printing Details *Don't use a hot glue gun for attaching the support ring or column to the board.. it will deform from the heat. *The trophy is a remix and has license limitations but the files I created have no…
Family game night was saved using Spencer's crank model ( https://www.printables.com/model/872475-card-shuffler-crank-arm ), but couldn't resist making a few usability tweaks! I shortened the main crank shaft a little because my hand kept…
This is an organizer for the game Truffle Shuffle by AEG games. I wanted a modular playable insert, that makes game play and set up easy. The coin tray has each number on the side so you can easily see which to grab, and it perfectly…
This is a shuffler mechanism designed to fit on REV c-channel and use their HEX shafts.
Hey there! I'm just wanna organise you some space.. Model this for my beloved IPod shuffle (great tech) Going to be OK with material of choise/ Mine is PETG. 15% infill + Mouse ears to prevent warping Y ou also can find CAD data in the…
My old iPod shuffle is so old the battery died. I opened it up and soldered a much larger battery and it started working again. But I needed an enclosure to hold the new larger battery. This is designed to hold a much larger flat lipo…
My goal in designing game inserts is speeding up setup/teardown and avoiding annoying plastic bags whenever possible! There's just three parts needed: Top layer to hold reference + cave cards, scorepad and the Forest board; Card tray that…
Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: hole_diameter = 2.39 no_angle = .1 tip_height =…
This bracket allows a fourth generation iPod Shuffle to clip to it. Useful for attaching it to hearing protectors, bicycle helmets, or what have you. The bracket has holes for attaching via screws, but of course you could glue it. The…
Phrozen Shuffle XL exhaust vent. The vent is designed to receive a 4 inch dryer hose. The internal fan on this printer is plenty strong enough to efficiently push air though the hose. I printed this part with supports from the build plate…
2mm added width, more depth to accommodate expansions.
There is no space for the scoring sheet, because this is the same width as the board in this game and rather slim. Drop me a line if you need a cutout and I will add a version with space for the scoring sheet. There is a second version to…
Repair Tool for pressing/glueing the back panel without damaging the front.
I play UNO and Five Crown via Tabletop Simulator. When I play IRL with friends and family, it is tedious to deal and shuffle. Especially Five Crowns. My spouse came across the ShuffleBox G1 PRO 2025 and I purchased one immediately.…
This is the logo to the Shufflepod podcast. You will need supports for this.
I want a way to display my old ipod shuffle and I found a picture frame that can fit my needs so, I made this 3 parts system and use 2 M3 x 12 and nuts to piece all together instead of glue for easy cleaning. Only the “cap” of the shuffle…
ARRCO HAND CRANK CARD SHUFFLER CARD DRAWER. I don't know if it will work with the battery powered version. V3 :I updated it a little, the cards were falling out because the back wall was to close. So this might work better for you, if the…
Repurpose a dead or otherwise non useful iPod shuffle 4th generation to make a nice techy decoration. Either fully 3d print and glue on your printout with the image or use a 3d printed frame and laser cut window and back cover Directions…
Cultivate a perfectly organized tabletop woodland with these custom 3D printed tree holders designed specifically for gameplay with the board game Forest Shuffle and the Forest Shuffle Dartmoor expansion (designed by Kosch and published…
Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: no_angle = 1 cog_tip_width = .6…
After a few failed attempts at printing the CardGuide file, I zoomed in on the model and saw incomplete areas that were causing the failures when I sliced with Prusa Slicer. This file is a simple hack and bash correction that allowed me…
Forest Shuffle Insert – Design Overview This custom insert for Forest Shuffle is designed with the following goals: Minimize plastic use in the final product. Maximize space efficiency within the game box. Final Product Features: Zero lid…
I really liked the nippleshuffler by Lexapskov (https://www.thingiverse.com/thing:4605923) but the print turned out a little flimsy for my clumsy hands. So I added a little strengthening.
My card shuffler's crank broke by accident. Rather than buying a new shuffler, I was lucky enough to find a crank design. However I soon realised that the shuffler would work better with a key mechanism so I combined the following models…
