Meepo Shuffle V4 Longboard Floor Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to store your Meepo Shuffle V4 in a vertical position wherever you want!
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 1212
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This stand allows you to store your Meepo Shuffle V4 (and possible other longboards) in a vertical position without the need to drill into your wall to install a mount, or even lean it against the wall which could scuff or dirty it.
There are two versions included here. The first is a single file model which will require a printer with a large bed in order to print. The second version is a set of 3 models which can be printed separately and attached together. I designed it to be attached using 4 M8 nuts, 4 M8 bolts (40-45mm long), and 4 washers. Note: if you print this version and wish to attach it with the suggested hardware, you will need to pause the print for the middle piece at the top of the cavity for the nuts (~27.6mm), that way you can insert them before resuming the print.
This stand may work with other longboards as well, but it all depends on the distance between the bottom tip of the board and the bottom of the wheels when it is in an upright position. For the V4, that distance is 29mm.