P
PrintablesRunningTurtle08
ski slats finger toy
mini ski slates for your fingers
- Pobrania
- 570
- Polubienia
- 68
- Ocena
- 4,33
Wyniki wyszukiwania: slats
35 modeli
P
PrintablesSurfalex2000
Lego *compatible* Garage / rolling gate /sectional door /slats
I was missing some of the Garage slats , so i reconstructed them. Please note, they are not compatible with the original ones, So you must allways use the original OR mine, you cannot mix them. Print as many as you wish. You need to print…
- Pobrania
- 359
- Polubienia
- 29
- Ocena
- 0
P
Printablesfneb
Window exhaust for 100mm duct, with rain slats
I liked this model, but I live in a country with rain and I'm not using this for aircon purposes but rather air filtration output. So, I added slats to stop, or at least reduce, the amount of rain that can get in. I'd suggest ASA for…
- Pobrania
- 248
- Polubienia
- 34
- Ocena
- 5
P
PrintablesFizzio55
Acoustic wall panel shelf for 13mm gap between vertical slats, and 13mm slat depth.
I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…
- Pobrania
- 94
- Polubienia
- 24
- Ocena
- 5
P
PrintablesRippersMTS
corners to make shelves with wooden slats 90º and T
I needed to make a storage unit in a place where there is very little space. This was the solution: wooden slats joined Design on TinkerCAD
- Pobrania
- 80
- Polubienia
- 33
- Ocena
- 0
P
PrintablesAlex_Usovich
Custom rear vent slats that fit 2003-2008 Honda Pilot
After my Pilots vents broke and paying the money to replace them, they managed to break again. I modeled them to be more robust than the original ones and they have held up really well. Vents are designed for right side but can be flipped…
- Pobrania
- 65
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPantovarnikCZ
A tool for cutting wooden slats / nástroj na řezání dřevěných lamelek
A tool for cutting wooden slats at different angles Material PLA
- Pobrania
- 56
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAlex_Usovich
Custom Front Vent slats that fit 2004-2008 Honda Pilot
Got a broken front vent on your Honda Pilot? This may be able to help. I received parts of a vent from a member on Piloteers and sketched out two of the pieces as I believe the rest are the same. There is one that is longer by 1-1.25 mm…
- Pobrania
- 55
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAnkes
roller shutter slats (Rolladen Lamelle)
Habe die Lamelle für ein kleines Rolltor für den Modellbau verwendet. Gedruckt aus PETG
- Pobrania
- 54
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarcel
Wieszak na ubranie - garderoba lamele (Clothes hanger - wardrobe slats)
Wieszak na ubrania przeznaczony do montowania między lamelami ściennymi.
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
Printablesarboc 3D
Christmas ornament (ball) - 12 slats, creative (no support)
[EN] Christmas ornament (ball) - 12 slats, creative (no support) Christmas decoration of 12 slats (lamellas). You do not need any support. The system of slats creates a completely smooth surface. The files contain 1 basic slat (solid) and…
- Pobrania
- 32
- Polubienia
- 19
- Ocena
- 5
P
PrintablesZneuzity
Quick easy and cheap crate from wooden slats - sidewall with handle
Sidewall to make crate from 18 wooden kindling beech slats Just print 2 side and assemble. Quick easy and cheap crate. Dimensions: wooden slat: 262 x 16 x 3,1 mm Small version (18 slats): sidewall (model): 165 x 110 x 8 mm final crate:…
- Pobrania
- 30
- Polubienia
- 12
- Ocena
- 0
P
Printablesmschmitt
Wolfcraft Undercover jig centering fence for 48 mm slats incl. Fusion 360
Fence for centering the Wolfcraft undercover jig on a 48 mm slat. The base of the jig is 60mm wide so the fence currently reaches 6 mm inwards. Fusion 360 included for easy remixing.
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesOldKingHamlet
Simple hanging hook - Convert Ikea bed slats to an over-the-door hat and clothing rack.
Wife was going to throw away some slats from an Ikea bed, but then she got an idea to repurpose it as an over-the-door hanger for hats and coats. I made these super simple hooks to print quick and nest in pairs, and holy heck it worked.…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMatti
Bed slats anti creak cap
Say goodbye to annoying creaks and squeaks from your bed! This innovative model is designed to easily slide onto your bed's slats to eliminate unwanted noise caused by friction and movement. Specifically designed for slats that are 69.55…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVenty
Bed Frame Connector – Practical Bracket for Joining Two Wooden Slats
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOBA
O-Sliders (double slats) for Slatted Frame hardness adjustment / O-Schieber (Doppel-Latte) für Lattenrost Härteeinstellung
Motivation & Solution [ slatted frame too soft with available double slats ] I have a slatted frame that is somewhat too soft, even with maximum hardness adjustment of the available double slats. As I also have a number of slats on stock…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
PrintablesQuark
Ikea PELLO Seating Fix with Ikea LUROY Bed Slats
In short, this is a model I created in order to fix the sagging seating of PELLO Ikea seats. This is made to be used with Ikea LUROY bed slats, that you will need to cut down to the right length by dry fitting the printed models on each…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJohn T
Pinwheel mount for chainlink fence with slats
I got these pinwheels and decided to mount them onto my chainlink fence, so I made these little brackets that attach to the pinwheels where the straws are supposed to go. Then just slip them into the chain link with one on either side of…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesOBA
O-Sliders (triple slats) for Slatted Frame hardness adjustment / O-Schieber (Dreifach-Latte) für Lattenrost Härteeinstellung
Motivation & Solution [ slatted frame too soft with available double slats ] I have a slatted frame that is somewhat too soft, even with maximum hardness adjustment of the available double slats. As I also have a number of slats on stock…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printables
roller shutter slats (Rolladen Lamelle)
Habe die Lamelle für ein kleines Rolltor für den Modellbau verwendet. Gedruckt aus PETG
P
Printables
Spacer for 45mm x 20mm Wooden Slats
This simple spacer is designed for rabbit hutches to slightly raise the horizontal bar behind the door – the one that keeps hay from falling out. By lifting the bar a few millimeters, this spacer helps prevent rabbit urine from pooling…
P
Printables
Bed Frame Connector – Practical Bracket for Joining Two Wooden Slats
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
P
Printables
Simple Shelf for 8x2cm wooden slats
This is a simple shelving system that requires just 2-5 wooden boards 8x2. I used 5 boards I already had with about 50cm each. I think you could easily go longer. The top and bottom shelf sides lock together, but this is in no way…
P
Printables
Spacer for 45mm x 20mm Wooden Slats
This simple spacer is designed for rabbit hutches to slightly raise the horizontal bar behind the door – the one that keeps hay from falling out. By lifting the bar a few millimeters, this spacer helps prevent rabbit urine from pooling…
P
Printables
Coat rack/Wardrobe made of fence slats and printed Hooks
I built a coat rack using self-printed hooks and a fence post from a hardware store (costs round about 1 Euro). I drilled holes in the notched post and screwed the hooks on from behind. I used 4x45 wood screws to ensure the hooks wouldn't…
P
Printables
Big Red Button Box with Slats
Quick edit on the box bottom from @Nolox that enables mounting the box
P
Printables
Slats
Slats The goal of the Slats puzzle is to braid the slats into the framework. This will take a lot of ingenuity and some perseverance. For the clever we added the Bloody Heart challenge: hide a heart between the slats. Who is up to the…
P
Printables
Ikea bed Slats spacers
This is for wood slats that are provided by ikea. My mattress kept falling into the frame because the wood slats kept shifting. Made this cap for the ends of the wood slat.
P
Printables
3-Gang single smart switch wall plate for wall slats
So you‘re trying to replace an ugly 3-gang wall switch with a single, sleek and modern smart switch. Oh, and it needs to hover above 1” thick wall slats that are themselves hovering .5” off the wall. Not to worry friends, problem solved!…
P
Printables
IKEA Bed Slats Peg
H: 15mm OD: 12mm ID: 4.5mm If you opt to use a wood screw, use a few more parameters when printing so it has something to thread into.
P
Printables
JYSK Slats Planetary Gear Carrier
Print details Layer height: 0.15mm Infill: 100% Supports: No Materials: Any Non-printable parts Original JYSK gears Post processing Clean-up the supports Attach the original gears *Printed and tested on a Voron 0
P
Printables
Window Slats -> Curtain Adaptor
These adaptors fit into clips (that usually hold those long plastic shades) that enable you to hang curtains on them. For installation they just snap into place! For my own setup, I installed an adaptor into basically every other clip.…
