Liczymy pasujące modele…
This is a extender for oil draining on a Honda snowblower with belts. -One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits…
Simply merged the 2 halves together and removed the design from the key top. So it would print easier on supports
includes .stl file and fusion 360 .f3d file Category: Parts
I built these for my Troybilt dual stage snow blower. They wear out and I'm sick of buying them every year. I would make them as strong as possible. I did 100% infill and 8 perimeters. and i used a PLA-CarbonFiber filament. and they are…
Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…
My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…
Replacement knob for Ariens Snowblower. Print with regular support Print Settings Printer Brand: Creality Printer: Ender 3 S1 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 1.6 Infill: 20% Filament: ERYONE PETG Red Category: Parts
A key for a snowblower. No need special print instructions. The red one on the photo is the original. Be cautious, the vertically printed model is very fragile if you try to break the stick in the middle. Recommended, print the model…
Your Ariens snowblower has an auger gearbox. It has oil in it. Have you ever checked the oil level? Now you can. Just remove the filler bolt, dip and read. The level should fall within the notch on the dipstick. Add oil as necessary. Read…
You can order a set of universal skids for about $15 US on Amazon, but what fun is that? I made these using ZYLtech CF PLA @ 0.3 mm layer height with 6 walls, an alternate wall, and 30% gyroid infill. Each skid weighs 92 g. I'm very…
Cap to cover the electrical receptacle on an Ariens Snow Blower
The steel skid shoes on my Toro 2 Stage Snowblower were scratching the surface coatings on my asphault driveway. This plastic one doesn't leave marks. Recommended to print with 100% infill and of a tough, temperature resistant material…
Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…
This is a replacement throttle lever for a Craftsman snowblower. This was built as a replica of the original part on the machine that broke off. The snowblower model is: 31AS6HEG799 The part should just push onto the metal throttle lever…
Replacement knob for Ariens Snowblowers, part number: 07509600 (maybe, not 100% sure) here's a link to buy one, they're $24.55 currently (!): https://www.repairclinic.com/PartDetail/Knob/07509600/1770004 I bought my snowblower and it was…
A replacement bulb for the primer on a Toro CCR 2450. Printed in TPU with the top on the build surface. Prints without supports. This replacement bulb can be epoxied in place or simply placed over the primer and pressed a few times, then…
Honda Snowblower Joystick mod for moving the joystick controller to the handle for ease of operation, needs 1 threaded insert to use the existing m6 screw on the side.
This was my first design of my own. I broke the cable for the drive handle on my snowblower. Using a piece of paracord with zip ties but isn't working too well. Designed this to clamp on to the metal handle frame. I Made it to use left…
Skid shoe TPU95A recap for worn out skid shoes on MTD, Troy Bilt, Cubcadet Snowblower/ Snowthrower. Insert old worn out shoe into TPU95A Recap and bolt back onto machine. May have to to scale up/down .stl file based on how much the shoe…
This is a replacement for MTD 1739470 Flange Bearing. This is the axle bearing block that wears out and causes your snowblower drive chain to keep coming off. When there is too much play in the bushing the slop causes the gear to come out…
I designed these covers as I have had to replace one or both of these idlers every single year. Snow packs up inside the pulleys during use and then melts. The melt runs straight into the bearings where it sits all summer long rusting up…
I have a snowblower that's had a broken pull handle for years. Yeah, I'm TOTALLY on top of that. Cup finally filled to the brim so I sat down, designed this, printed it out (warmed up a bit) and then went back out and replaced the broken…
My (90's era 33" Craftsman) snowblower has these holes near the wheel axle and the main purpose appears to be for mouse entry. I'm no mechanic, but I personally feel that these sorts of things function better without mice or their nests…
My snowblower never had a plastic chute clearing tool. I designed this tool with 15 inset stacks of tripled up 6mmx2mm round magnets. I've included the PrusaSlicer 3mf project file. I printed in ASA and paused at 6.6mm to insert the…
smartpower 24'' 212cc Two Stage Gas Snow Blower SnowBlower Skid Plates v1.0
Great snowblower, but I guess Ariens decided you have to break the choke knob while removing to service the carb! This replacement knob fits my 2022 24" Ariens. May fit others, I designed the model to be parametric so let me know if it…
Snowblower ski replacement. Fit Husqvarna Having a lot of loose gravel in the driveway, I need something more large easier to slide than the narrow ski that cames with the machine. Fits my Husqvarva (2 1/2 inchs between bolts) 1 inch…
This is a quick spark grip (or ignition wrench) for a snowblower or any other machine that uses that kind of grip (or wrench) to start the engine. Those can be lost and the machine cannot be started then. Just print a new one in PLA or…
This is a replacement chute rotation selector part for a Honda snow blower.
Printed in TPU to withstand canadian winter!
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
Not long after I got my snowblower, the top of the plastic cable protector broke off. I designed a replacement protector with similar dimensions. The first time I tried printing, I did not have good adhesion and the print failed at the…
This is a replacement chute handle part for a John Deere 44-inch snowblower (for X300, X304, X310, X320, X324, X340, X360, X500, X520 tractors). The John Deere part number is M90085. I suggest printing this in PETG with a brim.
Handle for my Turbopelle ^^, an electric snow shovel build by Sonneck ( https://sonneck.com/akku-schneefraesen ) . This handle is bigger and stronger than the original one. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts:…
MTD Snowblower Electric Starter Socket Cap This is used to cover the electric starter male socket when not in use. It should fit on a variety of electric start snowblowers that use a starter as shown in the photos. I printed with PLA on…
This is a fix for the broken eyelet that is generally found in Ariens and SnoTek snowblowers. In the slicer, pause the print to insert the eyelet in the print and hold it in place before the top side is printed. This securely encloses the…
Fix for common toro snowblower chute cleanout tool. Printed in TPU since it's a part that's expected to flex constantly.
Note works for either 20V Max adapter or 12V battery adapters. I frequently have to snowblow at night on our street due to our town's inability to understand where the curb is (leaving our street often 3'/1m narrower right at a bend) and…
This ski/shoe is for JULA MEEC snowblower (maybe it works for some other modell too). I
joystick https://a.co/d/4TqtYBf
Guide bracket thing for Frontier snowblower. I got the machine from my neighbor's trash to fix up, and this was part of it. I printed in glass fiber nylon, as the low temps this will see would tend to make most plastics brittle. It's also…
long story short, my original led light was getting blocked by the tank and chute so there was a dark spot in-front. solved this issue with this little bracket i made. now it lights up the front nicely. bracket was made to fit Biltema ST…
Backstory Recently, I picked up a used 44" snowblower attachment for our John Deere x370 riding mower. After setting up the blower, one of the last few steps is to attach the chute adjustment rod to the side of the mower. I noticed there…
Backstory If you've seen my previous model , you'll know I picked up a snowblower for my lawn tractor to help with snow removal. Having only ever used my tractor for mowing, this would be the first time using it to clear the driveway. I…
This bracket was modeled from the OEM John Deere TRS24 part number M122280 version and I added extra reinforcements gussets to the interior. I printed mine with ABS filament using 4 perimeters and 100% rectilinear infill. Print with the…
The design of the cab and its mounting structure are quite good, however there is a large wrinkle of sorts right in my line of sight. I found that if I added tension right above my head it un-furled the wrinkle…how to attach the…
I wanted to differentiate between my lawn, yard, snow, bicycle keys and made this keyfob for my Troy Bilt Snowblower
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
Snowblower ski replacement. Fit Husqvarna Having a lot of loose gravel in the driveway, I need something more large easier to slide than the narrow ski that cames with the machine. Fits my Husqvarva (2 1/2 inchs between bolts) 1 inch…
Every comments and suggestion is highly appreciate. The file include the instruction. the Blower come with the SCX10 V2 and TRX4 mount Update 29-10-2023 : Add harness to connect the blower to a Kyosho Blizzard (Beta version) Update…
