43 modeli
If you look at/read the world shelf too many times it ends up not feeling like a real word. So you might as well download now so you don't have to read it so many times. I would print in PETG if you need real strength.
Wydruk około 1,66 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Plant Climber/Supporting Frame design is very modular and could also be printed at 75% if needed. You can also use just three section to join up - pictures show four section per level. For base you'll need the spikes which could be…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A Vase with a Lid that has wholes in it for arranging the flowers. The problem my mother encountered is that flowers with a small stem tend to drop out of vases without support or do not sit properly when prepared. This vase comes with a…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
A small stand leg which can be attached to the plates, panes or other objects which need to be supported to stand I suggest not to use the G-Code file as you should scale the model according to your needs. One can print it directly and…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Designed to mark the safe parking areas in front of and inside my garage - reflective driveway poles like these are ideal markers, but are designed for sticking into turf. These small, lightweight cones are designed to hold these upright…
Wydruk około 3,64 €–4,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…
Supporting rib for plane wing
Don't forget to hit the like button if this helps you :) Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width) These prints work seamlessly with the…
Have you ever looked for a Drybox to print directly out of it while it stands on the top of your printer? Even with the QIDI printers, where you have struts on the backside, it is now possible to print directly out of the storage box. you…
Rack server rails - self-supporting - M6 / M4 Thread - Collection - Guide autoportanti per Rack server 1U 15.875x23x44.5mm 2U 15.875x23x89mm 3U 15.875x23x133.5mm 4U 15.875x23x178mm 5U 15.875x23x222.5mm Suitable for 10" or 19" Easy to…
I needed a supporting bracket to hold onto a quite heavy shelf because the original ones broke due to the weight of that shelf. Thus, I designed this and simulated it to see whether it will withstand the loads that I was expecting. It…
Blades fell out of my MMU3 selector, this should keep them in place.
added a hole for the I/O pins and widened a hole for a M3x3mm threaded insert to bolt the RPi down using an 8mm M3 bolt. for printing instructions and endcap to close the case, check out the original model by @Kyle_260544 . Have fun…
Remix of the Dew shield from SeeStar S50 Accessory Set by Lordwhiteley to support the mask/defraction spike clips from the ZWO Seestar S50 (Lens cap, Levelling pads and accessories set) by All-Pixels . I'd already printed All-Pixel's kit…
This is DaRk_dOg's rear power grill modified to support the Ender 3 V2 C14 power inlet. This has the separator between the power connector and the on/off switch.
The 6-Gearbox Thumb Manual Transmission Toy, newly designed by Mini Egg, perfectly simulates manual shifting with an excellent tactile feel. The features of the toy include: No support is required, and NO screws or magnets are needed…
Leonardo da Vinci's self-supporting bridge Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: tangled.com PLA white Category: Engineering
this is a set of camera thread adapters for mounting cameras, ball head, Magicarm and such with supporting M3 screw as internal stabilization they are therefore much more stable and are less likely to break. Still, better do not attach…
⚠️ Disclaimer: this project is coming in contact with 220V electricity. Be careful when doing any changes to your power outlets (because you or others may die). Old Swiss sockets do truly badly when supporting a plug. This is a…
Crankshafts can warp while being stored horizontally, print one of these for each main journal & store them safely.
This model can be screwed to the underside of e.g. a shelf, so you can store the supporting rails that come with the Mafell Erika.
Please see the parent model(s) for assembly instructions
Upgrade your paper towel storage with this 3D-Printable Paper Towel Holder, designed for simplicity and functionality. Download the file now to enjoy a tidy and efficient space without the need for additional supports or complicated…
This is an implementation of Clough42's ELS (Electronic LeadScrew), of the supporting files I used to mount the servo and encoder. The original youtube video is here: https://www.youtube.com/watch?v=FTs9GygRQ-U&ab_channel=Clough42 and my…
Support system for plants from the stem of the lamp. Stem of lamp was arround 15.4mm so can fit many diffrent models Used infill 15%
Holes for magnets 6x2 (one or two together) and/or 30x10x2. Please check out my other creations: https://www.printables.com/@RadekPilat/models
This plate will support a pi + Kuman TFT screen that's attached using the on-board GPIO socket (rather than a ribbon cable as required with other plates). The supports are positioned to hold the stack against the framed front panel, as…
simple modular spool holder i designed to support itself as my drybox is not that rigid. uses 28mm round stock as part of the structure and for the spool-shafts. As i used wooden round stock there are countersunk holes for wood screws.…
This vibrationes have a negative effect on print quality and accuracy. The problem reduce two simple printed supports on the bottom of the enclosure, mounted from outside below the printer feet. The supports are 2mm higher than the…
We like Point Galaxy, but the game box insert doesn't support sleeved cards. This insert will support sleeved cards (I use sleeve kings), and side storage.
Això és una llum led autoportant per un multi-connector tipus dau. O també hi ha l'opció de motar-ho a la paret. This is a self-supporting led light for a wall-mounted dice multiplug style. Or there's also a wall mount adapter. Print…
Used M12 x 150 bolt and nuts to create a stable construction Used magnets to lock the 2 positions.
just a brace i whipped up in tinkercad. its for a support board in a dresser. it can hold a 5/8 thick x 2 1/2 wide board
The 40-liter white bucket from Hornbach is used for the Kratky hydroponic method to grow tomatoes. Tomato plants need support, and the Spiral Plant Supports 170 Galvanized Steel W9Q6 are often used for this purpose in soil. However, these…
Print the following: 1x Vegas-Building-Tray 1x Vegas-Card-Tray 1x Vegas-Spacer-Left 1x Vegas-Spacer-Right 2x Vegas-Player-Tray-Top 4x Vegas-Player-Tray-Mid-Bot From the original : 9x of each building 55x spacers
Newly Updated** I love this raspberry pi rack made available from jonthemiller! I needed a tray that would support a DROK L298 Dual H Bridge Motor Controller and rebuilt it to support a L268 and amended ports. with ventilation. I have…
This supporting frame is for Zero4U 4-port USB hub sitting on a RPi3A. It contains holes for underneath pegs (version for RPiA/B without pegs is also available, but this is universal) and pockets for protruding usb sockets solderings.…
Supporting structure for a 3D printer hotend. With much faster accelerations, faster printing speeds and the need for longer melt zones hotends need to be amore rigidlyt mounted than in the past. There is now a greater need for stable and…
Blades fell out of my MMU3 selector, this should keep them in place.
A Vase with a Lid that has wholes in it for arranging the flowers. The problem my mother encountered is that flowers with a small stem tend to drop out of vases without support or do not sit properly when prepared. This vase comes with a…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Pulsar 2849 insert. Most of it is box straight to table. Each STL file name has the number that needs to be printed, and print profile is set to minimize filament (as was the insert). There is an optional tray/box with lid. 2 of them will…
