Liczymy pasujące modele…
Scale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.15 peg joint Best print orientation for maximum strength result Easy to print…
This is my take on a compact Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an up-and-down motion, the sideswiper makes contact on either side of a flexible arm, making for much less…
This case was designed to fully encase the camera visor to protect it when the phone is set on a table. The case sides are lower than the top and bottom bumpers to allow easy back swipes from either side. The USB cut out breaks out…
Work in progress, not tested. This is a Remix of Voron 0.2 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to…
Mar 7 2018: Added an STL file to print two small wrenches to assist adjustment of the contacts. See photos. This is my take on a Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an…
Gun for Transformers Siege Sideswipe or Earthrise Sunstreaker. Has a 5mm peg so compatible with all modern 'bots. Modelled after the Masterpiece Sideswipe weapon and scaled down appropriately to fit Siege/Earthrise figures. Print Settings…
This is a Klicky probe dock for the Voron 0, designed primarily for the Klicky PCB, but it may also be compatible with the original Klicky probe. It features a servo-driven arm that moves vertically, ensuring better clearance on the right…
Update 9/26/26 - Update! Better looking design & added compatibility with iPhone Magsafe. Phone or iPad stand. Designed ground-up in SolidWorks, but a remix of PhD3DP's phone stand, which was also a remix of BCN3D's phone stand (…
This is a Remix of Voron 0.2 R1 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (not enough space to use 6 x 3) You need all other…
Bobble the head of your favorite Autobot Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
This is a simple, minimal hardware, side swiper Morse code key. Otherwise known as a "cootie" key. NOTE: You will want to print the arm on a raft to prevent the leaf spring parts from warping off the bed. This design only needs five…
Dragon Burner v8 Cowl with hex pattern with slide swipe
Takes Metta.UK 's design, and adds a trough for a TRRS 4-Pole extension cable to use the swipe reader. Square_Contactless_Power_Stand_ r2 .stl positions the card swipe in a diagonal position, matching the cant of the stand, where…
This is a Remix of Voron 0.2 R1 Mini Bowden Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to use same magnets) You…
made the front more sturdy added also a plain version without hexpattern
Adjustable version of the SlideSwipe top extrusion mount, quick to print and easy to raise and lower
This is a remix of the servo probe arm (Arm1.stl) and rail mount top (RailMountTop.stl) parts for the SlideSwipe probe for Voron v0.x printers by chestwood96. I bought a pack of five MG-90s servos from Amazon , which came with stickers…
Simple trimming of the SlideSwipe probe carrier piece, which allows using less y axis space for pickup and dropoff. Particularly useful when paired with my SlideSwipe top extrusion mount if you want to mod your voron 0 into a tri-zero
During my tests comparing different microswitches like Kailh, Omron D2F-01 and D2HW the latter showed better accuracy and better stdev. The issue however D2HW won't fit into slideswipe probe. Won't be good for regular D2F switches though.…
This is a remix of the frame mount (RailMountSide.stl) for the SlideSwipe probe for Voron v0.x printers by chestwood96. The original uses a snap-in approach to hold the SlideSwipe mount on the 1515 extrusion. This remix uses two M3 nuts…
After installing the manta ray bed from hex-zero, I noticed that my slideswipe dock that attaches to the y extrusion won't fit anymore. To combat this issue I mirrored the entire assembly to allow mounting it towards the back of the…
To make it more gear like I compressed it vertically.
This is a Remix of Voron 0.2 R1 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. You have to print both parts.
This model is a customized version of the Mini StealthBurner for the Voron 0.2 R1 V1.1 by Fysetc, designed to integrate two distinct modifications that enhance both the functionality and aesthetics of the extruder. The first modification…
I recently ran into some problems with the servo and had to take it apart again. This mount temporarily serves the same function as the rotating one. It also adds 3mm play on the mounting holes in order to make it easier to calibrate the…
NEW VERSION HERE! https://www.printables.com/model/801506-slideswipe-adjustable-top-extrusion-mount-with-cab When upgrading my Voron 0 to a tri-zero I wanted to keep using my SlideSwipe probe. This meant moving the motor attachment from…
Now you can use chestwood96's slideswipe mount with your Voron 0 and Mini Stealthburner. I added the x-carriage for using with the LGX Lite. Note: You have to use a M3 nut to fix the cowling. For all the rest follow this link:…
A Remix of the Swiper Pwnagotchi case from syntask at Thingiverse. The added SD-Adapter is press-fit, just slide it over the SD from one side. See the Model origin section below for all the changes i made. Works with this components:…
Keep one hand on your wiggly kid (or muddy pets), while using the other to grab a wipe without a tug-of-war with the wipe pack. Only requires one additional item: weights, or modeling clay, or anything heavy that fits in the donut.…
Cautions : 1. I converted my Ender 3 to Direct Drive, using the MicroSwiss DD system. I also installed a Red Squirrel fan shroud and a BIQU Microprobe. It is possible that my particular combination of hardware results in a different set…
This is a holder/stand to hold and iPad/Tablet with swipe up access.
Yulelad Sausage Swiper. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toy & Game Accessories
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper • N-Strike attachment point for compatibility of a wide range of nerf stocks. •…
This is my take on Sideswipe from Transformers. You may need to resize this model to suit your needs.
(EN): this is a simple head replacement for SS93 Hot Rod to make it into a Sideswipe, to me the body and car mode look much much better for Sideswipe. I printed it with orange to make a G2 style, but you could just customize the whole…
Combine the sideswipe probe with a nozzle brush, use a single servo for two functions, no build volume loss (I've ensured that the brush does not collide with the printhead) You will want to print this with supports, with the bolt head…
This is a box for a swipe sensor which will dim and switch led strips. It's made for this sensor: Touchless Schakelaar En Dimmer All In One Ir 12V 24V Hand Wave Motion Sensor Sweep Beweging Proximity Infrarood detector - AliExpress 13…
A swingarm dock and toolhead mount for the Medusa HC and/or Duender. May work on other printers as well. BOM:
Took the original HF right fan duct and integrated holes for SlideSwipe magnets, as well as wire channels. Geometry has been taken from the DragonBurner V8 fan duct that supports the same probe BOM 2 6x3 magnets 2 wires follow the…
This is a horizontal mount for the few of use using a sideswipe on one side, and no spare room on the other, to put the bento under the sideswipe dock. Optionally you have to preload 1 more nut on the bottom extrusion to use the little…
Print of a sideswiper key. Fasteners - M4, 6mm, 12mm, and 24mm lengths
I added holes for 8x3 mm magnets to the bottom of the original model
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper • N-Strike attachment point for compatibility of a wide range of nerf stocks. •…
Took the original HF right fan duct and integrated holes for SlideSwipe magnets, as well as wire channels. Geometry has been taken from the DragonBurner V8 fan duct that supports the same probe BOM 2 6x3 magnets 2 wires follow the…
A swingarm dock and toolhead mount for the Medusa HC and/or Duender. May work on other printers as well. BOM:
A Remix of the Swiper Pwnagotchi case from syntask at Thingiverse. The added SD-Adapter is press-fit, just slide it over the SD from one side. See the Model origin section below for all the changes i made. Works with this components:…
Combine the sideswipe probe with a nozzle brush, use a single servo for two functions, no build volume loss (I've ensured that the brush does not collide with the printhead) You will want to print this with supports, with the bolt head…
![Nozzle Auto-Cleaning for Original Ender 3 with MicroSwiss DD & Hotend, using Brass Wire Brush head + [gcode_macro SWIPE]](https://media.printables.com/media/prints/542a9408-a475-4487-ab98-9a0221a7ac51/images/13021612_b92f4197-3c12-4655-9cb5-9d0d7f56be0e_1855d885-13d7-4253-9ec5-b59f0aead4fa/swipe.gif)
