Liczymy pasujące modele…
5% to 10% infill 0.1 to 0.2 mm layer height Some tips: For more force in poses try skirt 2-3 outlines (2-3 layers). Too Stiff joints: Negative horizontal expansion is recommended (-0.01 ; -0.02) or more. Too Loose joints: Positive…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2, 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your DJI Action2 camera with the best mount in FPV! Max protection with TPU in front…
Ripped straight from the Fallout 4 game files. 55k triangles 154k vertices
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Dash air vent grille for Volkswagen Transporter T4. Replaces original part 701819071 or 701819072. Added top honeycomb to prevent objects from falling into the vent. The attached model is intended for the right side, to print the left…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
Easy to print, upscale as needed, useful as a penholder or planter. A brim is recommended.
Universal PUNCH BUTTON & CO2 Cylinder Opener/Tightener for Umarex T4E HDR/TR50, HDR/TR68, HDP/TP50 & HDS/TS68 - Cal.50 & Cal.68 airguns. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15mm…
A small, easy-to-print bracket to help reinforce cracked dashboards in 95-98 Chevrolet trucks
Корпус для транзистор-тестера LCR-T4. Минимальные габариты, хорошая жесткость. Два варианта исполнения нижней части: под две ячейки 14400 с USB-C зарядным модулем и пустая коробка, в которую поместится 1-3 14500, 1-2 18650 или стандартная…
Labists ET4 firmware!! Was a pain to find, had to go to Facebook and message a support guy. So here it is!! https://drive.google.com/file/d/1wXhCY1h7tXundF53bnfL9ESNWKrbd4Bc/view?usp=sharing Category: 3D Printer Accessories
Soporte con forma de muñeco para dispositivo Amazon Alexa Echo Dot 4
holster for the hdr 50 umarex revolver
Covers for the Tailgate lock mechanisms in a VW T4 Transporter. Separate VW logo which can be printed in another colour and glued in
I printed the baffle using Jessie Premium PLA 1.75mm X Brad's Orange Glitter at 15% infill on my MK3s.
I designed a series of honeycomb-style keychains featuring various dirtbike brand logos and more in other parts. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The…
I designed this cupholder for a VW T4 Transporter , maybe it also works for other models (NOT TESTED!!!) Tips & Tricks: To print this cupholder: It is needed to use SUPPORT!!! I doing my best to make the model printable. Material: 2x…
push fit onto the front tow hook
Fallout4 icon on a keycap. I made it to fit my EVGA Z20.
Abdeckung für das Amarturenbrett des T4 am besten mit einer niedrigen Schichthöhe auf der Seite liegend drucken BambuLab Druckprofil more Designs
Case for the LCR-T4 with power switch, parts tray and extra connector for external functionality. The extra connector is optional, it gives you the option to make a plug to attach test leads for testing components that don't fit in the…
The original design fitted my LCR T4 but it was not perfect. You still need to print the bottom case from the original design. Print instructions This is the one I ordered https://s.click.aliexpress.com/e/_DlLbzqD different vendors have…
I have replaced the original ventilation grilles with these, as this variant is more space-saving in conjunction with our interior. Since I own a Mini+, I have divided the model into two parts. PLA works fine for me. No support.
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
This is a screen mount for the BigTreeTech Pi TFT43 touch screen to be mounted on the Voron Switchwire or the Ender 3 conversions. This screen is powered directly from the Raspberry Pi ribbon cable and best of all its plug and play - no…
Hey guys, I felt the need for a simple solution to adjust/fine tune the reach of my MT5 brake levers without having to find a 3mm hex and designed this little piece. Fits great on my HC 1-finger levers. Should also fit other Magura brake…
The part works for now but I have no long-term experience with it yet. Part in action: https://www.youtube.com/shorts/ZeuzpYQkdoY Expected upcoming issues: PLA might warp in car interior the two thin “clips” that get caught by the holding…
Middle seat belt cover for VW T4 - fits both sides. Be gentle when installing as you could break some of the clips. If you really like the design and/or just want to appreciate my work and time spend, you can buy me a coffee .
Simple and ready to install model of plastic clip used to keep VW T4 headliner in pleace but I guess it could be used in different places and cars.
Replacement for backside part of VW Multivan T4 cup holder
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…
Dash air vent grille for Volkswagen Transporter T4. Replaces original part 701819071 or 701819072. Removed top honeycomb for more accuracy compared to the original. Added engraved 'R' and 'L' for good positioning.
Huawei GT4 Watch Charger Holder Stand 46mm
Downloaded from https://www.thingiverse.com/thing:2456869 (author Willem Knapen - https://www.thingiverse.com/wknapen/designs) and remixed for using on the Prusa MINI+ printer. Bylo downloadováno z…
Probably compatible with other Thinkpads
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
Mit hat das Modell so gut gefallen, dass ich ein paar Extras hinzugefügt habe. Es ist im Größenmaßstab 1/43. Ich habe die Felgen und Reifen vom Modell getrennt. Damit man Sie besser drucken kann. Die Reifen müssen in TPU gedruckt werden.…
I have build a custom replica of the legendary AMG GT3 steering wheel for sim racing. I made some adjustments to make it more compatible with sim racing needs (funky switches , rotary encoder etc). The wheel is mainly made of carbon and…
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
The correct values for jerk have been set, voltage is adjusted, the motor is calibrated, Z-axis steps are fine-tuned, an
The stock phone stand angles the display to reflect ceiling mounted lights, this taller stand reduces that glare.
A simple snap-fit case for Adafruit's SHT41: https://www.adafruit.com/product/5776 Printed at .15mm layer height, Structural preset on my MK3.9
Smaller Version Cal 50 with 4,5mm Steel Bullet For Umarex HDR 50 Home Defence Revolver T4E
I couldn't find a mount that fit the PI TFT43 4.3" screen so I remixed the design linked below to fit and designed a bezel. Print with normal Voron part settings, no supports needed.…
The finishing trim piece that goes around snap studs in Volkswagen T4s (Transporter, EuroVan, Caravelle). Best printed with something flexible and near-zero infill for like-factory feel, but even plain gray PLA works well to enjoy the…
This wall mount bracket for the Yealink T46G provides a 10 degree angled mount for any wall you can screw into. There are several channels and a couple of holes on each side of the mount to aid in cable routing as required.
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
A magnetic / stick on holder for tooltags for CNC shops. Inspired by pierson workholding. Has a large cutout for magets, can be edited to suit specific magnet size. It shound't be too hard to edit to have the same capacity as your ATC.…
Quick design I made a few years that works but could use some refinement.
Umarex T4E 68 bullet for 12mm sphere
LCR - T4 (Transistor, Capacitor, Resistor, etc.) Tester case with the addition of a separate opening compartment for a 9V battery type 6F22. It is recommended to position the parts when printing as indicated in the 6th image and use…
Support: No Build Plate Adhesion: Brim
Bacteriophage made as practice in tinkercad. Works well, do use adhesion.
I needed a cupholder in my new (old, used…) Wingamm Ibis 500 based on a VW T4 and couldn't find one I really liked and so I made an own one. My T4 is 1998 but should fit on other construction years as well. It replaces the original front…
Just replacement of broken power button.
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
Umarex T4E 68 bullet for 8mm sphere
The model is still a prototype that I am testing in my car. Replacement of the heater fan grille with a cup holder adapter. The dimensions are pretty tight, so it's better to take out all the grilles, insert the replacement and then put…
upravený VW transporter T4 na sanitku. Je to pokus
The original part is made out of PA6 GF15 but feel free to test possible alternatives. I would use at least PETG or ASA.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
Fixture to install parking camera in VW T4. Camera is placed inside of the car (on the upper side of tailgate) so it isn't affected by rain/snow etc and you can see wider angle than if it was placed above the registration plate as it…
I print these in PETG @ 100% infill. These are good for CT40 and HSK 63a Tools. Also is a great way to hold tools off of the bench top when kitting.
I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the skirts, in the same manner as the…
Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.
It adds space for the co2 cartridge plus a bullet storage, so that the cartridge does not fall out, it is necessary to stick foam on the inside as in the photo
Inspired by Youtuber @makerunit's ITX PC design , I designed an enclousure specifically for ADT Link UT4G board. Main features: 3 slots GPU with 392mm length. (PNY 5080 as in the photo) and full size ATX PSU. All parts fits in 235x235…
It has been designed for 4020 radial fan and stock fan shroud of ANET ET series. You need 2 M2*20 screws.
A “remake” of sorts of the original from EirikT Needed a CAD model, so i converted the stl. STL, STEP and .F3D Included
Changes in this remix: Removed bay for 9v battery to create space to add a 18650, TP4056 charging board and boost converter board. Make the opening for power switch smaller to use with my switch. (from 12.9x19.5 to 8.8x13.6 opening)…
Since the GPU in my server (a Tesla T4) was running way to hot, since it's a passive cooled GPU and I had limited space in the server (a 2 unit supermicro) - so existing adapters I found didn't fit, I came up with this adapter to fit a…
VW Emblem 1939 für VW T4 Heckklappe zum ankleben. Ich habe zum befestigen PU Karroseriekleber von Berner.
Thumbstud for Leatherman Free T series multitools
CAT40 Tool Holder Reminder: this is a toy, do not put into a machine I am not responsible to exploded plastic. Assembly Pull stud threads into body Collet snaps into nut Nut threads into body Fits ½ tools Disclaimer: this will not cut…
Can be used as a badge on a 4Runner, also included a file with the letters separated. I printed it in PETG as 4x1x.12in.
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
This is the plastic holder for the headlights on a VW T4. There is no printed thread. I cut the threads after printing. Holds the headlight perfectly.
This is a plastic holder replacement for a VW T4 Bumper.
Filament Guide for Anet ET4 Pro and ET4 standard, to reduce filament snag and strain on the extruder motor and sensor. There are two stl files. One is Just an extender to be glued over the existing filament sensor cover. The other one, is…
In addition to the printed parts, you will need: 4x M3 Screws 4x M3 nuts 2x Small magnet (8x3mm) You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little…
Part of Paper tray for Brother DCP-T420W and probably for Brother MFC-J480DW T525W T510W DCP-T510W T525 T560 T310W T420W MFC-J485DW J562DW J485 T310 J480
Scheppach Akku Halterung (MGT410) für das ordentliche Aufhängen von Akkus der Fima Scheppach sollte auch für Akkumodel: BA2.0-20ProS passen / Scheppach battery holder (MGT410) for neat hanging of batteries from the company Scheppach…
Designed for the Craftsman CMST40730 small parts organizer. It's slightly tapered – shorter side points downward.
Phone holder attachment. Fits the square hole above the ash tray. It has a 17mm ball where you can attach your phone holder of choice, should be pretty universal. You can keept the little plastic insert in the original position (Made so I…
Added 9V battery compartment and some descriptive text on the front panel
Teile Ausdrucken und ineinander drücken oder kleben.
designed for T47 bottom bracket, maybe also useable for BSA 30 about 48/50.5mm diameter with 12 nuts PLA works better than ABS. did used it for disasemble a bottom bracket after some ride. Just for the one which dosen't quite tight…
Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…
Fallout4 stand for all 20 bobbleheads. Designed especially for the Prusa MINI+ 3D printer (or for another such small printer). “Podstavec - standardni” … can be used for any version of the figures “Podstavec - alternativni” … is intended…
A wall mount for the BOSCH 12V Max BAT414/GBA12V30 battery (https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS ). I've also designed a Slat Wall plate for this mount:…
This Project was made for a friend, and there the sizes seams to fit well. So here the disclaimer: I did not check the size for myself, please use the FreeCAD file if you need so! Here I give you an STL to repair a may broken slider from…
Cura didn't like the original file. So I imported to TinkerCAD and exported it to a new .stl cura seems to have no problem with it now. It's a simple fix nothing was changed.
ATTENTION: the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead. a simple mount for the hobbywing ezrun esc. the sct/mt410 2.0 chassis offers a place to…
