38 modeli
100x160mm sign, reading “Trick or Tequila” with art of a bottle with skull and crossbones on it Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
This is just a fun rendition of the original katakana emblem. If you will be putting it on a car don't use pla. The sun will likely warp it depending on the type of pla. Common sizes below. These measurements are from out side edge to…
Tequila is made from the blue agave plant (I modeled the maguey species of the plant, not the sharp pointy one you see on farms). Pulque and Mexcal are other alcoholic beverages made from these plants. Printing Details: The print has a…
This knob should fit on most cars, I have fitted it to my 1986 MR2. There is a file for multi-material and I have provided the individual pieces as well. Also, a non-multi-material file is included as well.
One thing I thought Traeger did right was put a probe/accessory shelf on the inside of their pellet hoppers. I missed that on the Recteq despite it having a 30# hopper. So I whipped this up similar to my utensil holder . Fits both probes…
This is an inlay for Bosh Professional 1mm to 13mm Drill Bit PointTeQ Set. It accepts Quick Setup Drill Depth Guide by Highrise Workshop.
Key chain using Toyota's old logo!
This is a 1:15 scale model of a recteq RT-1250. I had to over exaggerate the bucket and the legs and wheels to make it printable.
The Toyota TEQ LED lightbox with the Japanese rising sun is a visually compelling tribute to Toyota enthusiasts, featuring the TEQ logo set against the iconic rising sun backdrop. Enhanced with LED technology, the lightbox showcases…
Created this to be able to organize & hold my shot glasses, they always fell all over the place when in the kitchen cabinet, I also added the Jose Cuervo tequila logo to the design so it would look nice, now all shot glasses are grouped…
I have printed the emblem in various infills and honestly I had a 20 infill badge on my car (Camry) before it finally disintegrated after 3 years ( I had printed it in PLA). Since then it is now in PETG at 100% infill as to hold its shape…
This is a cover for the grease spout on my RT-1250. I'm not sure if it works on other models or not. It goes without saying that this should not be put on or left on when the smoker is hot. Print Settings Printer Brand: Prusa Printer: I3…
I printed the Shaker itself with tree supports so the holes come out well, other than that there isn't much. Shaker in PLA and the plug in TPU Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200…
Odd that a grill doesn't have hooks for commonly used tools, I submit to you my entry…. This holder will slip onto the frame underneath the lid of your hopper, close the hopper, and hang away. Tested on a recteq backyard beast, probably…
TEQ strut tower cap for Ke70 corolla. uses original rubber cap inside model with 3x m2 grub screws to hold it in place.
I printed the Shaker itself with tree supports so the holes come out well, other than that there isn't much. Shaker in PLA and the plug in TPU Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200…
I found that my DeckBoss 590 cover was snagging on the lid stop brackets. Since the cover's are not cheap, I wanted to protect it from this snagging (and potentially ripping). In the warmer weather the cover really digs into the lid stop…
Clips/holders for art rail (Artiteq) in case you lost or need extra ones. I print them with a 100% infill in PTEG and a 0.6 mm nozzle at a 0.2 mm layer height. I mounted the rail with these clips/holder and hung pretty heavy items. It…
A friend asked for a Tesla Piggy Bank model to give to a friend that was saving up for a Tesla. This model is the result. So far I have only printed it at 30% scale. The fit was really snug, I hope it will be similar when printed at scale…
la pieza tiene 3 niveles, para poderlo imprimir con tres colores, la primera a 0.8 milimetros (blanco) la segunda a 1.44 milimetros (negros) y la ultima a 2.08 (rojo) se recomienda imprimirlo con una altura de 0.08 milimetros Antiguo…
# Azoteq TPS43 Trackpad Holder for Corne V4 Pro Micro Edition (right half) A drop-in trackpad mount for the Corne V4 Pro Micro Edition (Kea Workshop PCB). It carries an Azoteq TPS43 capacitive trackpad (43 × 40 mm, IQS572) and bolts onto…
This is made for use with a AMS machine, you will need to designate the colors in the slicer for the embedded parts.
Emblem made specifically for a 2014 Scion tc. Should fit other Toyota models. The oval size is 12.2cm by 8.325cm
Cord wrap-holder with optional retainer clip for a new 2024 ReqTeq Flagship 1100. not sure if it will fit or work on different models or years for ReqTeq pellet grills , mine is brand new as of 2024 and it fits mine . The retainer clip…
You will need: GBL small caster wheel 16 x M3 each dumbbell Note: Depth of hole is 10mm as shown in the third image. Ensure the M3 thread does not exceed 10mm How I Designed This Quick overview of the steps: removed one of the end caps…
A quick and easy print of a Villa One tequila logo I designed for a friend. Just 3 colors. Print at .2. start with white, then black and finish with silver. Sign dimensions are 181mm x 179mm. Note: I added a smaller version that will fit…
Print with support. Standard supports worked better than tree supports for me. I printed with ASA because it will be stored outside in a box on the porch and temperatures can reach 100F. I included the Fusion360 file if you want to add a…
Print, enjoy. I printed mine with PETG, 0.20 mm layer height and 10% 3D Honeycomb infill.
I've had a particularly troublesome year with mice making homes where they aren't welcome including my Recteq 1100. So I made plugs for all the holes and a cap for the chimney. The chimney cap is two pieces so that is seals tightly around…
Made in PETg (for some flex), PLA etc. is also an option. 0.2 Layerhight 4-6 Parameters (Vertical Shells) for strength
Put your LEGO F1 Car up on the wall with this Axle Hooks And Connector model. It has been designed with the Artiteq Click Rail light (4 kg) in mind. This model has been tested with the following LEGO sets: 42171 Mercedes. 42206 Red Bull.…
Om dat mijn oude pinda voederhuisje stuk was heb ik er eentje geprint. Je kan het aan de roosterdraad hangen. Er is ook een spie (wig) bij om het potje pindakaas te blokkeren. Het zijn vooral meesjes die er op af komen, de pimpel en de…
Basically a ramp , everything else in the design is for installation and retrieval after use
UPDATE, Nu ook om tegen de muur de vijzen, Pindakaashouder vogels voederen. Now also to screw the screws against the wall, Peanut butter holder to feed birds. Porta mantequilla de maní para alimentar a los pájaros. Support à beurre de…
I run my Ibanez PTEQ pedal as an always on pedal so it does not live on my pedal board. This case and lid were designed to make it where I can throw it into a bag for transport and not have to worry about the knobs being messed up. I left…
Print, enjoy. I printed mine with PETG, 0.20 mm layer height and 10% 3D Honeycomb infill.
Om dat mijn oude pinda voederhuisje stuk was heb ik er eentje geprint. Je kan het aan de roosterdraad hangen. Er is ook een spie (wig) bij om het potje pindakaas te blokkeren. Het zijn vooral meesjes die er op af komen, de pimpel en de…
The Toyota TEQ LED lightbox with the Japanese rising sun is a visually compelling tribute to Toyota enthusiasts, featuring the TEQ logo set against the iconic rising sun backdrop. Enhanced with LED technology, the lightbox showcases…
