Liczymy pasujące modele…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Easy flamethrower for lighter and a antiperspirant You can use rubber bands to keep the lighter awake Be carefull, its still just plastic material!! Its really dangerous to play with fire, do it only under the supervision of a…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
As mentioned before, this a flamethrower model for the Dummy 13 action figure. For a while, I have been looking for a flamethrower model for my wide collection of Dummy 13s, and have had no success. I decided to model one myself and put…
Like my previously uploaded Proton Pack Parts I created these models to avoid buying expensive and rare movie prop replica parts for my Proton Pack Particle Thrower. This thing includes nearly all the odds and ends you need to create a…
When you have a dog that loves playing ball, a thrower helps save your shoulder and keeps you from handling drooly gross tennis balls. But carrying a 2 foot long thrower can be awkward. So I designed a collapsing thrower, so that it's…
This is a Simple dice thrower for any board game which need dice thrower
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to…
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
Print with 20 walls, 0 top and bottom layers and 0 infill Check out the video here:
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to…
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
Hammer that throws dice when you smack it on the table! 3D printable but needs a 9x35mm compression spring.
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
If you download the model, please don't forget to leave a like. Thank you! <3 Feel the heat of battle with this low poly geometric 3D print of Charizard, captured mid Flamethrower. The design highlights the fiery intensity and dynamic…
This is a lowpoly remix of the Discus Thrower (Discobolus) sculpture from "Scan The World". The sculpture was originally made by sculptor Myron of Eleutherae dated circa 450 BCE The .gcode file has fairly robust supports because the model…
Tennis Ball Thrower to play fetch with your dog. This was printed diagonally on an Ender 5 Plus and has an overall length of about 16.5in. Printed at 50% infill with 4 wall count and supports touching baseplate.
The design is a mini robot inspired by the original Tetris . It consists of a body, where the head is attached with a pin and the arms and legs are placed with ball joints. All the pieces are inspired by Tetris, the extremities beign the…
Pet/People food dispenser Use a DC motor and glue/tape/attach it to the hole on the spindle use #8 screw on the holes
🔥 Ever wanted to go out with a bang? This is your chance to go up in flames! 😏💡🔥 This fierce woman with her flamethrower lamp isn’t just a decoration it’s a statement! One switch and the fiery glow fills the room with pure power and…
Making this, it eventually looked like a Flame Thrower barrel attachment. Edit: made the walls of the first model a little thinner and the holes a bit bigger.
Pulled from my generic short N-Strike Flash Hider-Now for Rival! Edit: made walls for v1 thinner
⚠ HOW TO USE SAFELY ⚠ hold the adapter like a syringe with your thumb at the bottom, then squeeze and ignite 2-4 inches away from adapter. kinda weak so print at 25-40% infill for best results. please give feed back, as i am constantly…
32mm scale Goblin miniature for tabletop gaming. Tips, donations or patronage is greatly appreciated ❤️
Print with 20 walls, 0 top and bottom layers and 0 infill Check out the video here:
Upgraded weed burner torch for cooler performance — perfect for clearing weeds or firing up the grill. Its designed to fit one exact torch, but there are universal mounts so using different torches may be possible. Check the assembly…
Holder for dropping system https://www.wish.com/product/5a952f5f246bb0085d1a27f8 https://www.amazon.com/Elevin-TM-Drone-Delivery-Transport/dp/B07KXRJVPW…
I repaired a Worx WG650 snow thrower that had a couple broken paddles. I used some replacement paddles for a different brand of snow thrower and modified them to fit. The video of that process can be seen here: Worx snowblower paddle…
Just a friendly little auxiliary robot for your auxbot needs. Category: Toy & Game Accessories
This will light up your day, I will add cool vid. when I print this.
Allows you to attach the chute clearing tool to the snowblower. For installation, use rivets or metal screws. Permet de fixer le grattoir sur la souffleuse. Pour l’installation, utilisez des rivets ou des vis à métal.
🔥🕯 TRENCH ZEALOT — CONFESSION BY FIRE 🕯🔥 “Words lie. Flame does not.” They are not soldiers. They are walking tribunals ⚖🔥. When the Black Sons of Loyola encounter trenches too fouled for mercy—where heresy has nested deep into mud, lung,…
Description: Upgrade your fetch game with this print-in-place, no-support Chuck-It style ball thrower ! Designed for medium-sized tennis balls , this model is lightweight, ergonomic, and includes a belt hook for hands-free carrying during…
my flamethrower gas knob broke while tightening so i designed a new one
A fully printable Atlatl spear thrower. This Atlatl at full scale is 1x2x12 inches in size, plus the loading peg, and you may want to scale it down depending on the size of your fingers/hands. There is a hole where you can tie a finger…
I have created the D-72w Oppressor Flame Projector (the official name of the flame thrower) and do notice I only supply the weapon and backpack, you have to get a rubber band for the tube and you color your stormtrooper .
Here's my proxy for the Frosthaven monster, the Lurker Wavethrower! This guy requires more supports than I'd've liked, but I was able to sneak in some self-supporting bits from those spikes on his shell. As always, the .blend file and…
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
Spaceballs The Flamethrower, the kids love this one... PLEASE PLEASE PLEASE post a make with pictures if you make it. I do this because i like making others happy, your pictures make me happy. Thanks. All the parts are in the best…
Ice Kin bolt thrower for Kings of War Northern Alliance Category: Toys & Games
Unleash the ninja within and set your world on fire. This isn't just a 3D print—it's a path to total destruction and unmatched style. Whether you are obliterating targets or dominating the streets, this project brings the heat. Lethal…
The helmet files include: - Assembled, Solid, and Pre-Separated Variants - Bambu Studio Project and GCODE files - Pre-Separated into 7 keyed and interlocking parts - Pre-cut parts for smaller printers - Printable visor template - to trace…
This isn't a remix, it is sketched right from the original. It has a 1mm back plate, and 1.5mm raised lettering for a grand total of 2.5mm. The measurements are all in the attached pictures including the radius of the rounds. Also…
Replacement trigger for the Boring Company NOT-A-FLAMETHROWERS.
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
Skid shoes for snow throwers that have 2.5" spaced mounting holes. Reversible once one side wears out. Can be used to replace worn out skids or instead of stock metal skids to prevent scratching your driveway/patio material. Material:…
Hi Erana, Yes I do have this model, but it still needs a lot of work. Please upload it as a remix so we can all enjoy if you do take it on. The sizing on this one should be right at 88cms long, Cheers Jace
Thanks to Geoffro and Killonious for inspiring me to look at improving the finish on my models. My obsession with 3D Modeling and 3D printing started less than 8 months ago and I am enjoying increasing my skill level each and every day. I…
Tool to help remove the bezel from the Thrunite “Thrower” headlamp
Update March 10, 2023 : I am happy to report that I have been using the tool all winter and it is holding up very well. I did find one minor issue, in that the back of the shove blade would sometimes get caught briefly on the inside of…
The lever for the clutch release on the Cub Cadet and MTD snow throwers to allow freewheeling will sometimes get hit and break. Though not very expensive to replace, this is a 3D printed version that is an almost exact duplicated.
I printed the pinion using 95A TPU. That works best for me under harsh conditions - especially under -5°C. Some support might be needed (I used tree support with PLA on my IDEX). Here is a link to the Toro website with an exploded…
Snowball Thrower - Rubber Band Catapult If you like it --> press like it :-) Remix which has a smoother shape and a round Bowl with inside diameter of 44mm for the balls. You have a handle for easy stretching the rubber. Because of the…
This 3d printed cone replaces the autotrickler straw, which was always a pain for me. I never found a perfectly matching straw (and I tried a lot, big M, s bw y, some from the shop, etc) and there was a lot of powder spillage due to the…
Halterung für den Auswurf der Schneefräse Model “Texas Snow Buster 450” Bracket for the chute of snowthrower model “Texas Snow Buster 450” Material: PETG or ABS Infill: ca. 40% Gyroid
With this simple printed modell and a small rc car, you can share you business cards like no other. Stack the cards into the holder, grab a small toy car, set it full throttle and push the tyre to the uppermost card. No supports or rafts…
I saw this video where a professional card thrower showed some people how you can use a rubber band to "throw" a playing card with surprising accuracy and power. I decided to design this simple his simple slingshot to keep the rubber band…
Update Dec. 3, 2025 : You can use the model linked to below to make a holder for the chute clearing tool: https://www.printables.com/model/1502086-broom-dowel-rod-cylinder-holder-multiple-mounting This tool is used to help clear packed…
The model was designed to be printed at 75% scale for a 47mm (1.8in) diameter Kong tennis ball. At 75% scale, the two parts are connected together using: Square Head Screw; ¼"-20 Thread, 1-½" Long (McMaster-Carr Part Number: 91465A107)…
Designed this to fit the Nostromo incinerator unit made by HotPretzel : https://www.printables.com/model/30140-nostromo-incinerator-unit-from-alien-1979 The arms should be able to pressure fit into the base, no glue required
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Yep, we are going to build a nerf gun. In action and assembly: https://youtu.be/y7d4247r3rE Why do we build another nerf gun? Easy! I was interested in how things work out on such a more sophisticated project in fusion. I was keen to…
Hello! The original design was drawn by Dutchmogul. I redesigned his base. I really like the design, so I wanted to share it with you. I hope you like the model.
Needs some practice with throwing at first. Designed to fit balls with ca. 70cm diameter (like tennis balls)
Frisbee thrower which do not requires assembly and supports. Step file is provided. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Category: Mechanical Toys
i added some support to trigger to prevent breaking. 2 versions
the mandalorians right arm/flamethrower. instruction: there is a hole in the bottom of the top piece for inserting wires after that the cover should just preasure fit on top and then the rest of the assembly is pretty straight forward.
Impossible marble thrower . Discover your skills throwing marbles into the baskets. You will need 8-10 mm diameter marbles, place them on the trampoline and enjoy. If you have steel balls it will give you more security in your shots. Two…
This is a Model of the coolingfan of a Yanmar YSR420 Snowthrower. The Measures are taken from an original Fan. The Sparepart isnt produced anymore so i uploaded this Model. I used PETG and it is working well. I printed it with 6…
If you're looking for this part you know what it is....
The Discobolus by Myron is an ancient Greek sculpture completed at the start of the Classical period in around 460–450 BC that depicts an ancient Greek athlete throwing a discus. The model is a 3D scan of a small sculpture by a friend. He…
Just a fan work and a realization of an old dream I had when I was a kid to build a big 'ol army of spacefaring space nuns from 40kya in the future. These sisters love battle, that's for sure! I needed some flamer nuns. I have more I'm…
I'm so enamored with the peat bog mummies of the latest iteration of DutchMogul's Pocket Tactics that I had to make my own to expand my own army. It seemed only fitting that I then offer all of my new bog mummies here on Thingiverse for…
The latest mods from Ellie Valkyrie's garage! Flamethrowers! Requires supports. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs , All of my 3D…
When you have a dog that loves playing ball, a thrower helps save your shoulder and keeps you from handling drooly gross tennis balls. But carrying a 2 foot long thrower can be awkward. So I designed a collapsing thrower, so that it's…
Print it and screw it together. Only needs a deo and an electric lighter. Hope you like it
This design is based on my previous larger design that has a larger base. This design needs much less time to print than the previous one. The gears were downloaded from McMaster Carr. The ratio of teeth between the gears is 60:15 (4:1).…
This is a cartoonish howitzer dice tower that ejects dice through manual recoil. The .3mf files are at 80% scale, which means that it's technically bigger than what the slicer would suggest. There are known issues: you need a paper shim…
A flamethrower accessory for all transformers with 5 mm hands Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.15 Infill: 25% Filament: Sunlu PETG Black Category: Toy & Game Accessories
This model is compatible with the lego system.
BALL THROWER FOR DOGS, INCLUDES 3 PARTS THAT NEED TO BE GLUE TOGUETHER USE STRONG GLUE WHEN GLUEING SO THEY DONT FALL APART
Dice thrower with the iconical frase of aragorn in the return of the king, for Frodo, but in spanish xDD
