55 297 modeli
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Wydruk około 13,56 €–16,58 € nettoWstępna wycena jednego wariantu
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
Wydruk około 4,23 €–5,16 € nettoWstępna wycena jednego wariantu
This bolt allows two different direction nuts at the same time. It makes an interesting fidget toy. Print instructions The bolt was made after seeing this video: And while it's a lot nicer in metal, the 3d printed variant still is nice to…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
I’m deeply honored that my design was been nominated for the awards! Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects…
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
Wydruk około 7,37 €–9,01 € nettoWstępna wycena jednego wariantu
Tested in PETG, recommended to print in PETG
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extra strong wall hook collection - 6 variations + STEP file
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,80 €–11,98 € nettoWstępna wycena jednego wariantu
Made from a normal Benchy, Clay Rade's tentacles, and inspired by BUT NOT REMIXED FROM BECAUSE ITS NOT PERMITTED https://www.printables.com/model/350583-benchy-organic-support-test . Also I used a random water splash model I found…
Wydruk około 5,66 €–6,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint To all God of War fans out there.. I give you Kratos! God of War is a third-person…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
Wydruk około 2,70 €–3,31 € nettoWstępna wycena jednego wariantu
4 Variations. Customize to your liking using the STEP file. suggestions are also possible :)
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Festool D27/ D36 suction hose holder - simplify your tool management Where do you currently hang in your suction hose? Print your own Festool suction hose holder and make your everyday work easier and more productive. Do you need further…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
Wydruk około 3,36 €–4,10 € nettoWstępna wycena jednego wariantu
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 33,41 €–40,84 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
ALERT: If you use letter ‘g’ then change $fn=32 to $fn=15 This is a custom name tag / key ring charm generator using OpenSCAD with Barbie theme. These tags can be used for bags, phone charms, luggages, key chains, etc. Steps to Create a…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 17,39 €–21,26 € nettoWstępna wycena jednego wariantu
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Wydruk około 3,93 €–4,81 € nettoWstępna wycena jednego wariantu
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Paladins for your TTRPG needs
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
A more ergonomic version of SmileyPrinter's TikTok bolt-action fidget toy. There's a version with and without speed holes. Requires 7 6mm x 3mm circular neodymium magnets (ex https://www.amazon.com/gp/product/B096LZNZTQ). Included…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Electric Cable Diameter 5mm -> 10mm, mounted using screws D=3mm. Parametric using the STEP file :)
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
When looking for Diyable easter decoration i didn't find anything, which i liked. I could only find an image of something similar to this. As there wasnt any Instructions or files, I just made something similar and this is the result. i…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Making is straightforward without any specials ;-) Printed mine in the picture with 0.40 nozzle, 0.20 layer, 3 perimeters, 5% infill of extrudr NX-2 PLA matte white on satin sheet.
Wydruk około 9,68 €–11,83 € nettoWstępna wycena jednego wariantu
This extremely high resolution topographic globe of the earth prints in two halves, using around 350g PLA filament. It was created using blender, and adds small step at the coastline to aid with recognition of coastlines. The complete…
Wydruk około 16,27 €–19,89 € nettoWstępna wycena jednego wariantu
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Wydruk około 12,88 €–15,74 € nettoWstępna wycena jednego wariantu
This is a completely mechanical demonstration of the unit circle and corresponding trigonometric functions! Rotate the handle on the circle to a corresponding angle and watch the sine, cosine, and tangent graphs' value change with the…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- The Happy Planter Collection has been designed…
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
The most emotional robot ever of the Otto family is back!. Thanks to our own developed LED “Eyes” combined with all te dance moves, touch sensor and sound gestures of all the other Ottos. you will be able to program your STEM robot to…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cameras are attached to tripods and such using bolts in the American Unified Thread Standard , specifically UNC 1/4-20. Historically, the more colourfully named British Standard Whitworth thread was used, but market forces in my…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Google Nest Mini 2nd Generation Wall Plug Mount. Only tested with US power supply. Enjoy
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
A set of several old stone gravestones featuring runes/engravings, damage, and various carved patterns. I love these as scatter because they're a great mix of detail, built-in weathering, and print-and-forget. You can print a whole bunch…
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
SKADIS Citadel Paint storage solution Two versions, one with 6 bottles and one with 7 bottles. Combined they fill a full row on a SKADIS board supports required, see 3mf file
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Health Potion Tokens for DnD 5e. Single colour, or multi-colour with no MMU (add a colour change for the top few layers in the Slicer or manually hit pause to change the filament colour). Hand out Potion Tokens to your players so they…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
This is a basic redesign of a lock that I saw a couple of years ago. It is fully functioning and works like a real lock. To add, when you open the lock the combination is automatically mixed up and doesn't show the correct code. It can…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Administrador de cartuchos de juegos Playstation Based on https://www.thingiverse.com/thing:2993610
Wydruk około 6,28 €–7,68 € nettoWstępna wycena jednego wariantu
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Wydruk około 5,17 €–6,32 € nettoWstępna wycena jednego wariantu
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
The hands from the Creation of Adam by Michelangelo
Wydruk około 11,27 €–13,78 € nettoWstępna wycena jednego wariantu
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Got a long car journey ahead of you? Do you want to watch some movies? Well look no further! This tablet holder offers comfortable watching in a simple package. I designed this a couple years back, because I was tired of holding the…
Wydruk około 6,80 €–8,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Assembling guide on Youtube: https://www.youtube.com/watch?v=hUhmg1zEbRY BILL OF MATERIALS: - 220/110V plug - plug type depends on the country - R13-112A switch - https://s.click.aliexpress.com/e/_AX8eMl - 256 pcs of M4x16 screws (DIN912)…
Wydruk około 6,17 €–7,54 € nettoWstępna wycena jednego wariantu
Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
-All models require no supports. -Balloons and Garland are printed separately. -Polar bears have a hole on their hands to put Balloons or Garland in. -All bears were painted with acrylic paint. -2 versions for all bears (with/without…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…
Wydruk około 4,40 €–5,38 € nettoWstępna wycena jednego wariantu
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Unholy Six Collection A collection of legendary horror icons from the 80s and 90s – now immortalized in plastic. Six figures that turned nightmares into blockbusters – and now peacefully hold a tealight. printed on Prusa Mk4 and Bambu…
Wydruk około 5,95 €–7,27 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . low poly generated by using: lowpoly3d.xyz Nozzle 0.4 Layer Height 0.2mm (Recommended) No Supports needed Scale it as you like :)
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
Wydruk około 12,97 €–15,86 € nettoWstępna wycena jednego wariantu
