Liczymy pasujące modele…
This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…
Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.
Printing All parts are printable without supports. Assembly
this a remix of wire stripper. the extrra blade holder is added to keep the blade in place. Category: Hand Tools
Wire Stripper (Cutter Blade) With just only 1 cutter blade, you can use 2 times in the Wire Stripper (Take a look on the pictures to see how you split the blade). You will need: 2x M4 5mm screw 2x M4 7mm nut Category: Hand Tools
This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.
This is a hanger for the Vise Grip automatic wire strippers, inspired by “Wire Stripper Holder for Hexagon Storage Wall (HSW)” from Phobos. While that design did work, the hanger was a bit too small, and I didn't like how the strippers…
This is a remix of a model which I cannot find anymore ! I've simply reinforced the stripper clip stopper since it seemed to break off when printed from PLA, and also added some hex patterning to the sides to provide some style points as…
Welcome to the assembly Steps and thanks for your interest! I’m happy to announce that the assembly instructions are finally here. The assembly guide ''videos'' are ready, and you can now assemble your Wire Stripper Pro (…
A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…
Needs to be printed with an M3 insert from the original project. Holds a standard wire stripper/cutter. Most generic designs of this tool on Amazon seem to have the same dimensions (they're probably all made in the same place), so…
Holds a wire stripper, the pictured wire stripper is 48mm at it's widest. 2 versions; with or without text.
A must have tool for every balsa model builder. This tool helps you cut balsa strips with precise width everytime with square cuts everytime. Specifically designed for #11 surgical scalpel blade. Ergonimical design for ease of use while…
Just made this simple guide for stripping wires and cables for scrapping copper. It needs to be bolted down with 5mm screws, then you just use the hole above to guide the razor blade and pull the wire through. Small model is for 3, 4, 5,…
I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…
A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…
I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…
Just a small remix of wire stripper based on classical design https://www.thingiverse.com/thing:2468753
This 2x2X6U Tool Holder will hold four pairs of small pliers for electronics and/or jewelry making, and two pairs of Wire Strippers.
This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…
mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!
Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!
.200 mm, no supports New FDM bed adhesive: https://design-and-additive-manufacturing-services.square.site/product/p2b-weld/5?sbp=false Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: I3 MK3S…
I had a lot of old cables that I wanted to recycle at a scrapyard. To achieve a better rice, I freed all the cables on the sheath to get the bare copper. Unfortunately, the cheap cable strippers from the well-known online portals do not…
You Need These Parts: 1xStanley Blade 2xM3 Screw 2xM3 Nut Blade Measurement: Added 2 M3 Screw support Optimized for ease of grip I recommend to print it with 0.12mm layer height I remix this model but i cannot find the original model…
Purpose built hook for hanging the Irwin VISE-GRIP Wire Stripper from the Honeycomb Wall Storage grid .
In my case I was trying to remove the thick clear insulation around the wires that I am reusing from some strippped direct burial 14 AWG wire. Adjust Wire_Diameter & RazorBlade_Thickness to match whatever your trying to strip and the type…
This is a Remix from this model by lhomem : https://www.thingiverse.com/thing:4676186 And It uses these universal hooks from CSD_Salzburg : https://www.thingiverse.com/thing:2853257 It now fit flat to the board and I find it is a more…
I've included a couple of variations of the herb stripper, which can be printed with no design; an embossed design; or as a multi-colour print.
Holds CHP wire strippers on a standard 1 inch pegboard grid. Printing Instructions Print in downloaded orientation. Use supports from bed to support pegs.
Skadis mount for Irwin wirestrippers using universal hook system How to use: Open the .3mf file in prusaslicer (import geometry only) then slice to gcode. notes This model uses negative spacers which cannot be exported to stl as of…
It needs of 5 self-tapping screws to insert in the little holes above, in such a way that the tip of the screw protrude of a bit to cut the cable. So insert the cable to one side of the cable stripper on one of the dimensioned holes and…
I use a stripLULA to load my .223. But I didn´t find any ammoboxes for ammo on strips. So... here it is. The clips come with Geco (Ruag) ammo. The box can hold 5 strips á 10 rounds. The ammo fits pretty tight. I printed the box with ABS…
This is a one piece drop in airstripper/moderator that also centers the barrel inside the shroud. Print top down with a brim and no supports. PLA+ or better recommended.
Introducing a versatile and efficient 3D-printed wire stripper, designed to utilize a standard half razor blade for precise wire stripping. This innovative tool has been tested with various types of wires, including single core, dual…
WAGO Compact Wire Stripper for 221 Connectors Description This Compact Wire Stripper for WAGO 221 Connectors is a practical and space-saving tool designed to strip wires to the perfect length for both 4mm² and 6mm² WAGO connectors. It…
Introducing a versatile and efficient 3D-printed wire stripper, designed to utilize a standard half razor blade for precise wire stripping. This innovative tool has been tested with various types of wires, including single core, dual…
A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.
This is wire stripper holder I designed. This item is inspired by IKEA SKADIS Collection by CSD_Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
For loading my 5.56 magazines I need my ammo in stripper clips. This is a pain to put the rounds into stripper clips so I developed a couple of quick prints to make this process easier. You just put 10 rounds into the stripper clip bottom…
Print upright using supports for the pegs. Use a straight infill type (cubic or grid), using gyroid has the potential to knock over the support mid print. Set the support to tower and use “initial layer support line distance” of 0.5mm.…
I used a broken blade and an M3x5 mm screw and nut from an old computer for the set.
Mount for a Jokari Super 4 Plus wire stripper for IKEA Skådis pegboards. It prints well in the default orientation using tree supports for the little pegs. I used a 0.15 mm layer height just to make the top curved parts look better, but…
The parent system is neat, but I needed a way to mount these IRWIN wire strippers: https://www.amazon.com/IRWIN-VISE-GRIP-2078300-Self-Adjusting-Stripper/dp/B000OQ21CA Additionally, I found some of the sidepiece flats and pins in the…
Hardware required: 2xM3 nuts 1xM3 washer 1xM3x5 screw. 1xM3x15 (or longer) screw. Stanley utility knife blade. This was designed around American 4AWG wire specifically and the Stanley utility knife blade, with the intention to make it…
In my idea of tidying up my workshop, I wanted to store my Stanley Fat Max FMHT0-96230 wire stripper in a dedicated box. So I created this box to store my wire stripper and keep it in my electrical drawer! Details of the bin: I followed…
I have a bunch of fishing reels that I have to strip and replace the line on, and I thought that there had to be a better way of doing it than by hand. This model has three parts--a cone, a removable base plate, and a shaft. The shaft is…
Super basic and quick model for holding wire strippers. I wasn't a fan of other loop-style models where you had to insert the tool upside down, and they'd bounce around. This model holds the tool by the wire cutting part, so expect some…
Holder for Stanley Fatmax Wirestripper/wirecutter for Ikea Skadis pegboard. Print upside down. No supports needed. Print Settings Supports: No Notes: Print upside down Category: Organization
A Gridfinity 5x2 holder for an RJ45 crimper and a wire stripper. Wanted to be able to store these in my drawer without taking up much height. My RJ45 crimper default position is open, so to put it in I need to close it, which the…
Skadis holders for Knipex pliers, wire cutters and wire stripper The holders are designed to be used with this skadis peg for mounting https://www.printables.com/model/635620-skadis-skadis-universal-peg The wire stripper holder works is…
Remixed for scraper blade aka single edge razor blade. Also, now in the shape of a whale, because, Whale! Uses a m3 screw and heat set insert. UPDATE: V2 with a whale tail, because Reddit really wanted one. Also comes in two flavors. With…
I used ESUN PLA PLUS for this model and it gives enough flex to the detents this way. but other materials might work fine as well. Category: Sport & Outdoors
Coaxial Cable Stripper - RG58 / BNC Tool for stripping RG58 coaxial cable for BNC-type crimp connector. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm M3 screws and nuts. Print settings Fill density: 15% Fill…
My small version of UTP cable stripper. Blade for stripper is 9mm.
This tool should be able to cut balsa sheets up to 1/8" thick into strips. Set the thickness using the front side. Aligning the slide to the edges will be 1/16". Sliding left will reduce the strip width, sliding right will increase the…
My take on the Air Arms MPR air stripper, threaded with 1/2" unf. All of my rifles are .177/4.5mm so this is designed for them, but you can alter the calibre to .22 or .25. There is also two 3mm holes for grub screws if required. Print…
Halte deine Knipex Abisolierzange stets griffbereit mit dieser speziell entworfenen Halterung für das IKEA SKÅDIS Pegboard. Dieses 3D-Modell bietet den perfekten Platz für deine Zange und integriert sich nahtlos in dein bestehendes…
One of my favourite Gridfinity modules is the 160mm Stripper Holder by CmdrMoto. I don't use them for wire strippers, but to efficiently store slim things on their side. They're massively versatile and under utilised. I wanted a smaller…
I loved the box for stripper clips made by Philip, but as I use .223 and not .556 I wanted the box to reflect the ammo. In the process, I created a blank front version, so I could add my of text and personalization, as well as adding a…
Gridfinity holder for the automatic wire strippers you can buy dirt cheap on sites like Aliexpress. Two versions are provided, a 3x5 one with stacking lips, and a thinner 2x5 version (on the photographs) without the stacking lips.
Based on Gavitka's Wire Stripper (thing:4897773) I created my own design. It is smaller and it is only for cable of Ø6mm. Print Settings Printer: Voron 0.1 Rafts: No Supports: No Resolution: 0.20mm Infill: 25% Filament: Doesnt matter…
Knipex Art.# 12 62 180 Wire stripper holder for honeycomb wall. You need 2 M3x12 screws to mount it.
Processing a large harvest of herbs for extracts and cooking can be time consuming. This simple yet effective tool reduces the time required by simply inserting the stem of the herb into an appropriately sized hole and pulling through to…
Printed in PETG with 0.2mm layer height, no supports. You need to print the parts in their original position for good strength (see build plate picture). Use a 9mm cutter blade with 12 lines, and cut it in the 12th line (see blade…
This is a herb stripper for removing leaves from herb stems. The holes have diameters from 10 mm to 2 mm (3/8 in to 1/16 in) which covers most of herbs used in the kitchen. The outline designed as Bezier curve, extruded to 3D in OpenSCAD.…
This is a 5x2 gridfinity full height storage box for the Ideal Stripmaster wire stripper. I'm not fully happy with it because the handle end of the box could be a little shallower - it's possible to push the handles down too far making it…
Quick and dirty remix of the holder by Bjorn_448100 to fit on the multiboard system.
This holder for the gridfinity system is designed to store the KNIPEX Automatic Insulation Stripper (12 62 180) and have it easily retrievable. To the best of my knowledge, the models of JOKARI have the same dimensions, hence should fit.…
Mount for Ikea Skadis for Knipex Wirestripper (12 40 200 & 12 50 200). "knipex mount 2 with hook.stl" has an extra hook to ensure that the wire stripper does not fall off, e.g. for fastening to a door. "knipex mount 2.stl" can be printed…
Device for winding a fishing line with a screwdriver or electric screwdriver Bom: • M5 screw • M5 nut The «cone» and «fixing_nut» do not require supports. The «shaft» is printed with support. The hole must be cleaned on the «fixing_nut»…
fasteners: M4x10 2x countersink M4x12 2x countersink M4x25 2x countersink M4x16 2x nut M4 2x stift 6x12 6x
Coaxial Cable Stripper - RG214 / N-Type Tool for stripping RG214 coaxial cable for Jyebao N3100A N-type crimp connector. Fits several other N-type connectors as well. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm…
This model is similar to my Gridfinity 2x Flush Cutters Holder model, but is built to hold wire strippers instead of flush cutters. Its 1 grid longer than the flush cutters model. The strippers in the photo are the Hakko “ CSP-30-1 ” and…
Pellets can experience air turbulence in the muzzle during propulsion, negatively impacting shot accuracy. You can improve accuracy by using an air diffuser for airguns, allowing the pellet to be propelled by laminar flow and eliminating…
Simple tool for stripping optical cables with cheap standard blades.
Wanted a simple way to hang my wire stripper. Very simple design meant to hold it upside down without adding any wear to the springs. Feel free to tinker:…
Introduction This is a collection of remixed models with the addition of a plunger piece I designed to apply correct, even pressure to the top round in stack for easiest/smoothest loading with the intent of making this functional with 20…
Wanted a simple way to hang my wire stripper. Very simple design meant to hold it upside down without adding any wear to the springs. Feel free to tinker:…
tool to cut balsa wood in long strips, max-width around 14mm requires 2x m3 nuts 1x 10mm m3 bolt 1x 20mm m3 bolt (round head)
IRWIN VISE-GRIP Wire Stripper - https://www.amazon.com/gp/product/B000OQ21CA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Just a Multiboard verison of the original skadis design
A small remix to remove the blind and replace it with 2 12.5mm spacers. Also, the M2.5 screws screw into threads printed in the part.
Bin to hold vise grip wire cutters/strippers. It is slightly too large to print on my printer so I had to use the slicer to cut it into two parts. The text is optional and I used the Manual MMU method to swap filaments. This is included…
Gridfinity bin for Knipex 13-72-8 wire strippers. Tool outline was generated using https://tracing.tools/
What you have here is a Pegboard Wire Stripper holder perfect for the little crimper/strippers that come bundled with crimp-on wire ends. See the picture for exact type. Customized version of http://www.thingiverse.com/thing:537516…
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
I designed a few DIN Rail tool holders, to store my most frequently used tools on the side of my Lack enclosure. Check out my DIN Rail Tool Holders collection . All my holders are intentionally designed with some play. So, every tool can…
I imported Rene's Skadis mount for the Engineer PA-09 crimpers into Onshape and made a copy to hold the Engineer PA-06 wire strippers. I have included two versions. One plain and one with embossed text (on the opposite side of the PA-09…
Simple mount for holding a Klein Katapult style wire stripper on a Skadis board This project makes use of the Skadis T-Nut mounting system , and makes use of 2x M2.5x12 screws and 2x M2.5 nuts. There are T-Nuts included in the default…
Wall mount for Knipex 1252195 wire stripper with hole for M4 srew
Designed as a mount for my 8" Irwin Wire Stripper (2078309) that uses the Skadis T-Nut system. Through some user makes it seems that this design conveniently works for other wire stripping tools as well. I actually replaced mine with a…
My Method I used Fusion to turn the original STL back into a solid before drafting the slots by an additional 20 degrees relative to the bottom face. I have provided the F3D file and a STEP file for further remixing. Printing Tips Print…
I use this to protect the threads on the ends of my barrel. But I thought I'd make it into a basic air stripper (not quite muzzle brake) design. To build the .scad file you will need the OpenSCAD thread library:…
Honeycomb Holder for Jokari Super 4 plus wire stripper. Printed with 0.6 mm nozzle, 0.3 layer, 20% infill, tree supports Printed on Anycubic Vyper ;-D
