Liczymy pasujące modele…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
“That’s right, Yosemite Sam. The roughest, toughest hombre that ever locked horns with a rabbit.”
Lola Bunny bust to be printed in parts. This design includes the following STLs: -Bust -Left ear -Right ear Recommended printing parameters are listed below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to…
This is a quick little riser to get my Tuneshine lifted to be visible above my couch cushion. It leans the device back at about 5 degrees and raises it up about 30mm. The tuneshine unit can be found here https://www.tuneshine.rocks/ if…
"What's up, doc?" Bring the world's most famous rabbit to your collection with this Bugs Bunny 3D printable statue. This model captures his nonchalant charm, featuring his signature tall ears, gloved hands, and a mischievous grin. The…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas blanca 2mm, negro 1mm Diámetro 40mm Kingroon KP3S Printer Printed with 0.4 nozzle,…
King Neptune Pendant use 3 walls 50% infill Honeycomb infill ironing optional orient however you please , I found it looked the best when printed loop down with ironing on.
Frustrated needing to replace your hearing protection because of a small part you cannot get? I was, no you don't need to be. These should work on any 3M over the ear style hearing protection that uses 2mm rods to mount the yokes on to. I…
Hello, Welcome to my profile, full of models and miniatures :-) I have Coyote from Looney Tunes for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the…
Hello, Welcome to my profile, full of models and miniatures :-) I have Daffy Duck from Looney Tunes for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the…
Hello, Welcome to my profile, full of models and miniatures :-) I have Bugs Bunny from Looney Tunes for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
To work with the 3M WorkTunes, I had to heat up the knob to 170*F, press it onto the shaft, and let cool. Heating the knob and allowing it to cool on the shaft is what makes the splines on the shaft bite into the plastic. I did not try to…
Lay it flat to ensure the strongest print and eliminate the need for supports. I used PLA, and it worked well. However, PETG or ABS would likely perform even better. You'll need three T-nuts for 2020 extrusions, along with three M5 15mm…
ENGLISH: Follow me on Patreon for a commercial license: 3D Wusel Welt | Patreon Bring classic cartoon fun to your home with this digital file for a Looney Tunes Lampe 01 3D-engraved lamp. The sphere features a highly detailed engraving of…
The beloved Looney Tunes Taz character as a can holder to suit 375ml (12 oz) cans. Could be scaled slightly to suit other size cans. This is a scan of the original mug, which was then changed to make it a little easier to print and to fit…
If you have a 3M Worktunes that uses a two piece headband that looks broken like this: I made a one-piece FLEX design. Print with TPU. Printed 0.2mm STRUCTURAL, 2 perimeters, 10% infill, no supports. The slots have an overhang which…
Please adjust sizing/depth of cookie cutter to your preferred dimensions!
We had a set of these headphones where the clip was broken and the cup was constantly falling out. This was the fix. When installing these onto your headphones, be mindful that both attachment points are directional. The tube that the…
“That’s right, Yosemite Sam. The roughest, toughest hombre that ever locked horns with a rabbit.”
Lola Bunny bust to be printed in parts. This design includes the following STLs: -Bust -Left ear -Right ear Recommended printing parameters are listed below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to…
This is a quick little riser to get my Tuneshine lifted to be visible above my couch cushion. It leans the device back at about 5 degrees and raises it up about 30mm. The tuneshine unit can be found here https://www.tuneshine.rocks/ if…
"What's up, doc?" Bring the world's most famous rabbit to your collection with this Bugs Bunny 3D printable statue. This model captures his nonchalant charm, featuring his signature tall ears, gloved hands, and a mischievous grin. The…
Looney Tunes - Bugs, Porky, Daffy, Tweety, Tasmanian Devil, Sam and Sylvester 3d printable model.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.84mm and the Actual…
I made this Gossamer for a friend, and thought I would also share it here. It prints straight-forward with no issues on my U1. Be careful when removing the supports from the fingernails, and the various hairs on the body. The paint on the…
Looney Tunes - Speedy Gonzales - 1953 3D printable model.
Looney Tunes - Bugs Bunny - 1940 - 2 VERSIONS 3D printable model.
Customized version of http://www.thingiverse.com/thing:140343 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=140343 Instructions Using the following options: hinge_placement = 1 emboss_height = 1.5…
Looney Tunes Logo, the logo for the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. The logo for the Looney Tunes cartoons has changed considerably over the years, as well as at times incorporating…
I found that the case provided by ISOtunes for their ISOtunes Free wireless earbuds was a tad unstable and I often lost it in my workshop. I created a case that wraps the original ISOtunes earbud case and, via embedded 10mm x 2.5mm…
Inspired by RedDadSteves Looney Tunes Sign I attempted to create my own in Fusion 360 without remixing his original files. Hope everyone enjoys! PLA material and settings used 0.2 layer height, 20% infill on a Creality CR10 V3 running…
Barnyard Dog from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Beaky Buzzard from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Porky the pig Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
I've included a version for desktop/bookshelf and also one for placing on a wall. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the…
Hector the bulldog from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Taz from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Witch from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Looney Tunes sign Hopefully you won't catch the Looney Tunes earwig and have that tune going ‘round-n-’round your head. :D
If you like these models, please press the like button. If you create these models, please post a make! These fridge magnets are designed to be usable as a coasters also. 3 Characters from Looney tunes are included and all the models are…
This Piano Toothbrush / Pencil holder is a great gift for the music lover in your life. This does not require a multicolor printer as you can easily print the keys and top separately. Couple of dabs of super glue and you have a great…
I made this after watching the little mermaid movie. I figure it would be fun to make it. make a comment if you want me to change anything. follow me for more designs. :)
Michigan J. Frog - Looney Tunes The dancing frog. He is in one short only called “One Froggy Evening.” https://www.youtube.com/watch?v=evgEJlOPoeo
cute disney/looney tunes babies keychain / necklace charm 3mf & stl inc print face up all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the rest of my keychain collection by…
cute disney babies keychain / necklace charm 3mf & stl inc print face up all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the rest of my keychain collection by clicking on my…
cute disney /looneytunes babies keychain / necklace charm 5 color and 4 color inc in 3mf file 3mf & stl inc print face up all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the…
This is Gossamer, the monster from Looney Tunes, originally created by the amazing Chuck Jones in 1946 for the cartoon “Hair-Raising Hare.” In the 1952 remake, he was called “Rudolph” or “Monster.” In the 1980 cartoon Duck Dodgers and the…
The Grohe aqua tunes holder broke so I cadded a new one in Fusion 360 and printed in PLA with 0.30 layer using 0.6 nozzle and 15% infill. I used organic supports. Use two M4x30 screws to fix it and re-use the M10 insert bolt from the…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas blanca 2mm, negro 1mm Diámetro 40mm Kingroon KP3S Printer Printed with 0.4 nozzle,…
