634 modeli
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
I designed this powerful tweezer for laboratory equipment whose purpose is to directly facilitate laboratory activities related to clinical, biological or chemical laboratories. Since I could not get functional efficiency from the designs…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
tweezer cover - the originals were soft and poorly visible (transparent in the photo)
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
3 tool holders in one. Hold 3x Tweezers, 5x files, and a pair of scissors on your Honeycomb Storage Wall.
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
A simple holder for tweezers that only requires 2 slots in a row.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Slim long tweezers for removing poops during print.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Modified an existing model to use less material and accommodate 8 plastic tweezers.
Wydruk około 4,06 €–4,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BORING Tweezer - Set Not as boring as it seems. These are highly optimized for FDM printing, super cost-effective and print perfectly every time. Ideal for teachers, scientists and hobbyists who might deal with many students or multiple…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Garage Set part 4 : Tweezers for 3d printers I don't have a 3D printer so if I could win a Prusa i3 MK3S at the "pratical contest" it would be fantastic. Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…
This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…
A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
UPDATE : A new and improved angled version is now available for download! https://www.printables.com/model/475497-angled-jst-tweezers _____________ I've been using this JST tweezers whenever I'm modding 3d printers. If you're like me, I…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
REVISION HISTORY 2023-07-23: v1.01 released - resolved issues with overhangs in the “teeth” 2023-05-08: v1.00 released PROBLEM I found out that though my JST tweezers, being very effective for pulling out and connecting back JST…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
Tweezer rack for Ikea Skadis pegboard system. Multiple slot sizes are included to accommodate different size tweezers. Should be printed with supports for the Skadis hook regions. Remix: I enlarged the original model to fit the larger…
These craft tweezers come in handy for grabbing small items with precision. Available in two tension options -- v4 for soft tension and v5 for firm tension -- these tweezers are especially useful for crafting with my pony beads and for…
Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…
Tweezer holder for the Ikea skadis pegboard system. Original OnShape file available here https://cad.onshape.com/documents/a23dd4002928da9978ebafd8/w/d15acd308e77d01db89f5ccf/e/2e32cb14af912c3bb6e348b6 Print Settings Supports: Yes…
Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…
A remix of the 6 tweezers version if you have 9 tweezers to store
The original design is taken from Miguel Camba , who was inspired by Alexandre Chappel's drill bit tray . I reworked the Fusion360 file to have a better adjustability. It is not perfect yet, but spacing, widths and lengths are now fully…
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
this is a remix: https://www.thingiverse.com/thing:2384216 The great design of pzonyga didn't really grab the tip for me because the thin arms deformed a little when they went together. So I made the tweezers a little more massive and…
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports ANGLED version to be printed upright STRAIGHT version to be printed flat on bed use 4…
Small but useful tweezers, which is easy printable with ~3g filament within ~10min. Here is a short movie. Check how well the tip surfaces coincide with each other. Its one side is designed flat for easy printing. Have fun!
Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…
Prints upside down without any support!
Made sides wider, stronger and with angles to easily slide on the tweezers. Also, it prints horizontally and has an easy grab to remove it. To attach to a multiboard, either push it into one of the tile connectors like I did or use one of…
Tweezers holder for Honeycomb Storage Wall.
The 4x1 box works with both straight and curved tweezers, the 3x1 box only works with curved tweezers
Simple tweezer holder to be used with the honeycomb storage wall .
JST Tweezers These tweezers are specifically designed for effortless disconnection of JST connectors. BENEFITS: Designed for FDM Printing No support needed Smooth Operation
Little tray for 3 tweezers to be hung on a Ikea Skadis board. The model should be printed without support. Print it upside down (I have uploaded the STL in the “to be printed” orientation). I used a 3mm brim to help secure it to the bed.
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
Holder for 4x Tweezers to mount on a IKEA Skådis Pegboard. Update the pictures. My original tweezer holder broke as it was, pointed out in the comment, to tight dimensions. So I printed the new model in PETG. Had some strings and a bit of…
I print it from PET-G too, but best are from PC - Carbon. 5. Nov. 2023 Added side version
simple cross tweezers. Useful for soldering delicate parts, holding wires etc. tough-version can be used when more force is required, normal version (less spring force) when handling delicate objects. Instructions print (no support/raft…
Today, I was putting together Perler Fuse Beads with my cousins when we ran into a dilemma: There was only one pair of included tweezers. I happened to have my computer open, so I hopped onto Solidworks and threw together this .stl so I…
Gridfinity tweezers holder
Just tiny tweezers for little stuff :)
Holds two simple tweezers upright. Print the left and right hooks flat, angled edge up, and attach them with self tapping 3x12 tapered screws. As the hooks are separate, you can easily print different shape hooks to work with your pegboard.
A set of 3D printed tweezers in five different shapes. Perfect for modeling, electronics, or small repair work. Each tweezer tip has a unique shape – from fine to strong grip. Easy to print with no supports needed and a small hole for…
This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…
A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…
Gridfinity Tweezers box - 10 pieces This is an optimized version of the “Gridfinity tweezers box” by MarB (Thanks a lot for the .step file) I added various fillets, made the baseplate slightly thicker and removed unnecessary features. It…
some easy-to-print, basic tweezers for optimum strength print with enough perimeters so it turns completely solid in case you need flat surfaces at the tip, you can fold a piece of sand paper so it's double sided and carefully pull that…
Elevate your bead crafting with this duo for standard-sized beads! Showcase Bead Buddy Aligner: Quickly aligns beads with a simple 5 second shake. Saves time during bead prep. Tweezers: Enables precise placement of single beads on your…
Multiboard Push-Fit Straight Tweezer holder Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped. Even though I redesigned the…
Thats my tweezers holder for my honeycomb wall. Just screw a M4 insert behind it. Done :)
This is a 1x1 Gridfinity container used to store a single pair of side cutters and a single pair of tweezers. The side cutters shown in the picture and used to model the slot within this container can be found here . This model was…
A simplified version of a set of plastic medical tweezers. Great for sorting beads, picking up small parts or eating Chinese food. I use them to feed baby birds…. ….to my snakes! * I have uploaded three versions in various levels of…
This is a holder for up to ten tweezers and optionally one additional cross tweezer. I found no holder which is mounted vertically to the wall and was suitable for my set of ten SMD tweezers, which you can find easily in the common online…
Ergonomic Tweezers - Pinzetta ergonomica Resize/Scale to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Precision tweezers for biological samples of small animals, insects, worms ... they allow animals and insects to be gently grasped without crushing them. I use this in biological samples in speleology. on the photo, the original is in…
Tweezers for aquaristics. Ideal for planting flowers
Reading some of the comments from the original design and having some concerns myself, I wanted to make sure that it wasn't going to be a chore to remove tweezers quickly and easily. Luckily, the original designer provided the STEP file…
Useful tool +++ 4 designs for different needs +++ Fast to print
Use the 3mf file. I use a 0.6 nozzle, make sure you adjust that to your own nozzle. The end of the tweezers has a cup that will allow you to grab different things and hold them more easily. 4 outer walls, 5 bottom, and top layers Infill…
Customized compliant mechanism tweezer
Honeycomb Storage Wall Tweezers Holder. Prints with no supports
It's said necessity is the mother of invention. Dropping spacers or having the magnets grab the needle nose pliers while mounting the heatbed was frustrating. These tweezers made subsequent reassembly easy. With a long reach and secure…
An optimized version of @theo_from_tinkertv optimization of @MarB's “Gridfinity tweezers box”. I didn't like having to store my curved tweezers with the pointy side up so I added a trough to allow them to be stored pointy side down. I…
The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers
Every one of these tweezers need less then 5meters. Have fun!
Description copied from MakerWorld : This 3D-printable crossing tweezer is meticulously engineered for the precise manipulation of screws and other minuscule components. Its innovative design allows for automatic closure, securely…
Room for 6 tweezers, 2 precision knives, 3 spudgers, etc.
🧰 Tweezers – 3D-Printed Workshop Tools These 3D-printed tweezers are designed for precise and functional workshop applications – ideal for gripping threads, holding tiny screws, positioning small parts, or fine assembly work. Each design…
I tried a few existing models for hanging my tweezers and decided to make my own variation. Nothing groundbreaking, just a style I preferred. I printed mine in PETG, .2mm, no supports.
My friend broke his Tinderblox tweezers so I modeled them. I've uploaded Fusion360 (.f3d) file for easy edit. Game: https://www.alleycatgames.com/tinderblox
Three models of tweezers, simple and quick to print Tres modelos de pinzas, sencillas y rápidas de imprimir
These tweezers are a further development of the chip grabber. https://www.printables.com/de/model/205739-grabber These tweezers are suitable for grabbing things that are difficult to reach and where there is little space available The…
This 1x1 gridfinity block holds a pair of side cutters, a hobby knife, and angled tip tweezers.
Tweezers for your odds and ends. Grab those tiny screws, bolts, and nuts.
All tweezers i could find had to thin tips to make then usefull for Hex & counters wargames, this one has tips that is kinda the middle of the metal ones you can buy and the thin ones for electronics. This one fits GMT counters perfectly…
Tweezers to grab small magnets. Holds 8-15mm magnets. There is also a separate model included (by request) for 6-10mm magnets. EDIT 2022-05-26 Added tweezers for 4mm magnets by request Print instructions PLA, no supports.
This is a single-file cross tweezer, based on the original design by Joo. I found that the sides of the original moved too much, so this version keeps everything in place. Supports are probably needed in the print.
I have a lot of picks, tweezers, files, and exacto knives. I wanted them to have a place but also have the most frequent ones easily accessible. Behold the 5 bay, stackable, pick, file, exacto, sharpie, tweezer storage. Stackable. 4…
Simple tweezers stand for watchmakers or hobbyists. Keeps tweezers in easy reach without cluttering up the workbench. V2.0: Added separators as done by a someone who remixed my V1.0 file. Thanks for the idea :) In Bambu studio I changed…
I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…
Small tweezers for removing poops during print.
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…
This is a 1x2x6U Tool Holder for your Cutters, Long-Nose and a couple pair of Tweezers.
This is a print-in-place tweezer that requires only 4 grams of filament, no supports, and no glue.
Spring tweezers You can choose from 2 spring variations: Soft spring - easy to work with Hard spring - if you need more harder tweezers Sizes: 142 x 30 x 10mm No supports needed Any convenient materials
I have created this model to hang my tweezers and cables. It's the size of small grid so that I could reuse grid connectors. I have added the hooks to expand it's functionality. Hope you find it useful as I did.
![[Improved] Tweezers holder - IKEA Skådis (Skadis)](https://media.printables.com/media/prints/352540/images/7421305_1ad9cfbe-7ae6-4563-a026-1e7d129b8a85_75bc5a30-1342-4e98-aeca-f2fe1cfea4a1/img_6567.jpeg)
![Honeycomb hook hanger + hook (tweezers, cables ect) [single grid size]](https://media.printables.com/media/prints/830222/images/6405567_c71d7214-9215-44f6-a915-e86270acddc7_a384fcec-a9bb-4986-b311-442197256079/hanger2.jpg)