Liczymy pasujące modele…
Meine Frau brauchte eine halter für ihren Lockenstab deswegen habe ich ein Ständer für den GRUNDIG HS6230 erstellt. Gedruckt in PETG
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My black print in PLA is strong but was a bit rough testing it; perhaps with no raft this would be the go-to. Yellow images represent an ABS print that was brushed with acetone to smooth it out. Clear is PETG with lots of brim no raft.…
print as many additional chains as you need for your self
A 4"x4" mini lithophane of the album Chromakopia.
Various word art names. Prints well at 0.2 on Mk3S+ and Mini+. Print face down on smooth PEI sheet for best results. Credit to Robert Halter.
Tyler, The Creator Spotify code keychains. Scan the code on the keychain in Spotify and the song you have chosen will begin playing. If you have any song codes you want to see leave a comment.
4"x4" Flower Boy album cover lithophane.
Project: CHROMAKOPIA HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and…
Origional Design by - @tyler_200709 Tyler designed an excelent case. I was able to print without supports and only a brim for the buttons. I printed at full speed for my K1 0.2 PET-G CF No Supports Brim for buttons 4 Walls I used M2.5…
The difference between 2.0 and 3.0 is that 3.0 has slightly larger lettering (keyring size is the same) Update: 4.0 has been added and has a better keyring
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A caricature of Billie Piper as Rose Tyler from Doctor Who (the 9th doctor)
4"x4" Wolf lithophane album cover.
Found a nice model on Thingiverse and remixed it and want to share it here aswell. printed with PETG - no supports
Rock Bands - Aerosmith - Steven Tyler 3D printable model.
Fight Club - Tyler Durden (Brad Pitt) - 1999 3D printable model.
every album made by Tyler the creator these are all single color files make sure to do a layer pause a layer 8 and switch colors there (bright color on dark color, or dark on bright color recommended)
Tyler, The Creator "Call Me If You Get Lost" Keychain. Feel free to request any more keychain ideas. Thanks
Since I rarely use the trimmer guards on the Gillette Styler, and don't have a bathroom counter, I made this wall mount to free up valuable real estate around the sink. I mimicked the design of the original Gillette Styler holder as well…
I bought GILETTE styler and leaving it around in the bathroom, I missed a holder which does not come with the product. I thought of making one, it might not be perfect but it is perfect for the use. the grooming holder has to be glued on…
This is a historical replication based off an actual tyler (tiler) sword from the House of the Temple of the Scottish Rite of Freemasonry. It's outside the main building and part of an awesome exhibit including some of the US founding…
Scroll down for the english translation… “ TYLER ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
I'm going to CFG dressed up as igor in the earfquake music video. I needed this golden pin, so I made it. works great! I would highly recommend using adhesion for this, AND using as fine resolution as you can. I’d also love to see how…
Quick Remix of the original model of @TylerDurden_312780 with holes for M5, to be mount with bolts and t-nuts. Printed mine in 0.2 with 3 perimeters and 20% gyroid infill, printed without support without problems. For the right bracket,…
sonny angel tyler the creator
Heres a remix for the Gillette Styler you can stick to your wall
Tyler Perry's Madea - Mabel Earlene Simmons - 2005 3D printable model.
This is a Spotify keychain that if you scan will bring you to Tyler The Creator on spotify.
really thin model in person but works great
WeeTinyFreestyler The WTF is like the FIVE33 Tiny Trainer but in a freestyle Frame. Essentially you can use all the same parts you would in the tiny trainer but you don't have to, you can get creative with this fame. The WTF frame has…
Matlock - Tyler Hudson - 1986-1995
Step into the underground world of rebellion with this incredible Tyler Durden 3D print STL model that captures the iconic character's defiant stance and attitude. This detailed figurine showcases the legendary anti-hero in his signature…
About the design This wall mount is designed to hold my wife's LUXE Airstyler hair dryer, curler. The holder accommodates the weight and size of the styler unit and has a notch for the handle +cord to hang down. Printing Instructions…
I would recommend scaling it up for better results
CMIYGL keychain where you an put your own photo or just Tylers one
-Layer height 0.2mm -wall thickness 1.2mm -top/bottom thickness 1mm -Infill density 20%, Cubic If you can, you should slow down the outer walls, to reduce time speed up the infill speed, and to change colors/filament add a script…
Simply stand for ALL Fstyler design mouse…
Eien Adaption des Dyson Airwrap-Halterung auf Neded All in One Hairstyler.
This is a multiboard mount for the Gillette Styler trimmer and its guards (sizes 1-3). The trimmer mount takes the space of 1 column and 3 rows. It slides over two connectors (one for the top and one for the bottom for extra security,…
My daughter is a hard-core Tyler the Creator fan and asked me to create a base so that she can put her Chromakopia figurine on the Turntable. I guess with some modifications, you can adapt it to any other figurine with a round base.
Tyler, the creator's album keychain "Chromakopia"; 3.7cm high, 4cm long and 1mm thick.
Model I made for my car dealership, modeled from the Classic Toyota logo.
I felt like putting a bullet between the eyes of every Panda that wouldn't screw to save its species. I wanted to open the dump valves on oil tankers and smother all the French beaches I'd never see. I wanted to breathe smoke. - Narrator…
Gillete holder for Venus razor and styler. On a double side tape. Print with Petg or PLA.
Modeled for Dyson hair styler Use optional folders in .blend model to configure the final output, but here is 2 typical .stl to print - with click-and-hold and 2xM1 screw mounting alternatives Print with 0.1mm layer height, tree supports…
The photo shows the first version, where the angle isn't ideal. Overall, it works fine for me, so I didn't reprint it. However, in the model uploaded here, this has already been fixed — the tilt angle is correct and it's ready to print as…
a simple model of tylers 2017 album Flower Boy
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Wednesday and Tyler Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at…
The first (near as I can tell) organizer for Tyler Sigman's Crows. This is for the basic edition, not the deluxe one. Everything fits in the box with zero lid lift. Designed in Onshape.
A single open yoke on a small back plate. The trimmer's barrel drops through it and the wider head sits on the top face, so gravity does the work — the same principle as a wall-mounted razor holder. Nothing is enclosed. There's no cup or…
I felt like putting a bullet between the eyes of every Panda that wouldn't screw to save its species. I wanted to open the dump valves on oil tankers and smother all the French beaches I'd never see. I wanted to breathe smoke. - Narrator…
CMIYGL keychain where you an put your own photo or just Tylers one
Tyler, the creator's album keychain "Chromakopia"; 3.7cm high, 4cm long and 1mm thick.
Chromakopia Mask from Tyler the Creator's new Album
Fight Club - Tyler Durden (Brad Pitt) - 1999 3D printable model.
