Liczymy pasujące modele…
Craftsman V20 battery mount can be printed with no supports and 20% infill. There are two screw holes (4mm or less) for mounting and the head should be smaller than 10mm.
This is a tool mount for the Craftsman V20 series tools, you can mount vertically or horizontally. I would only recommend using this on the smaller tools. I designed a snap in mounting system that works on a peg board, but you can mount…
Simple mount to store your Stanley fatmax v20 batteries Best option is to print with support in the slot area
Craftsman V20 4-1 Place Battery Non-Latching Holders Mount Craftsman V20 Battery Holder Mount. Includes files for 4, 3, 2 and 1 battery holders. No supports needed. Print on edge as pictured. Edit: Added files with 80mm and 40mm hole…
Wall mount for a Dewalt DCS356B Oscillating Multi-Tool. Spacer included, just level and use 2 screws. Can be printed with PLA / PETG / ABS. I prefer PETG on this mount. Check out the oscillating blade wall mount holder here:…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M12 DC 5V NPN NO LJ12A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
Nastenny drzak aku naradi Stanley Fatmax v20 // Wall holder for Stanley Fatmax v20 acu tools
I made a wall mount for a Parkside battery. Simple and practical solution for organizing your tools. Happy printing! :)
Keep your cordless tools organized, secure, and ready for action with this ultra-slim, one-sided tool holder designed to fit Milwaukee M18 and DeWalt V20 power tools, as well as Bauer and Hercules (Harbor Freight) cordless tools that use…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
Some-thing to hang my Craftsman V20 Blower Hanger CMCBL710 with. A hanging bracket to hold the blower when not in use. Print on edge as pictured. No supports needed, but go with 6 perimeters for strongest bracket with not much more print…
Keychain Collection V20 20 different Keychains! Follow Please! My New Group: https://www.printables.com/de/group/3d-printer-group-for-epic-figures-eQ3qerR
I needed a relatively simple and quick to print wall mount for my Craftsman V20 charger so I made one. Designed it to use #6 panhead screws since that was what is in my drywall screw kit. Uploaded the F3D (dont judge me) if you'd like to…
Well, basically this is a version of this thing: https://www.thingiverse.com/thing:6414243 where I reduced the length of the arms by 3mm and also added the latching clip so that the battery can be installed upside down.. This way I can…
Just a push fit attachment to give you a narrow aperture on the Sharks odd shaped handheld vacuum range, for getting into smaller area. Also included a particularly long one you can slice down to the size you want. No supports required.
Updated version: This is a Craftsman V20 battery mount for the Craftsman VersaTrack system. This is remixed from the screw in mount by kengeer. Holds battery securely to the track. Version 2.0: I redesigned my versa track clip and better…
Craftsman v20 duckbill nozzle for the round tube variant. You'll slip the cutout side on first, locking in behind the raised spot on the tube, and then rock it forward to press fit into place on the end. If scaled properly it should fit…
Simple, easy to print, tool holder for Craftsman V20 tools. No supports needed. Print on edge as pictured. Edit: Added extra long version. Craftsman V20 Tool Holder XL
I wanted something that can hold a tool like this model , but I wanted to keep the battery installed in the tool. The Craftsman V20 handheld vacuum comes with a crevice tool attachment (7) that stows in the Onboard storage (8) This design…
The software that you need on the camera to recognize the count, may you install very easy with crome (ff is not working) on this site: https://jomjol.github.io/AI-on-the-edge-device/index.html
The final print will require an m3 (roughly 16mm but quite flexible length wise) to mount to your drill. I printed in tpu to prevent breakage because I am rough on my tools. This may work with other materials but pla is likely too brittle.
Model is designed with a 2.2 mm wall, to fit 5x0.4mm lines. Material: PETG Line Width: 0.4mm Wall Lines: 3 → no infill Flow Rate: 110% on my Snapmaker printer, I needed a little more material, otherwise the walls would separate Print the…
The final print will require an m3 (roughly 16mm but quite flexible length wise) to mount to your drill. I printed in tpu to prevent breakage because I am rough on my tools. This may work with other materials but pla is likely too brittle.
This year's shutter shades re-design! Snap-on temples and an easy-to-print design - let's goooo 2022! HT to original design by @drjames: https://www.thingiverse.com/thing:1603773 Category: Glasses
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter Type 8212. The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter…
Support to adapt the Gk7205V200 camera to an FPV test drone.
Craftsman V20 Charging Station Bracket to store charger and hold battery while charging. Store the charger when not in use and attach to the battery while charging. Battery holder is taller to provide clearance for charger module. No…
A film holder for an Epson Perfection V300 scanner. Needs minimal supports. Settings used to print were grid/snug to support just the overhang, 5% grid infill, and a .16mm layer height. Holds a 6-photo strip, and has a small catch…
mostly inspired from thingiverse: Clamp MFT Adapter by JoFi1987 - Thingiverse I made my first model with some help using FreeCAD in order to adapt it for Bessey HV20 clamps. 4 small holes are made for M5 screws and bolt (M5*12 is working…
Material: PLA/PETG Layer Height: 0.10 Infill % : 30 Supports: None Print Orientation: Default as modeled
🧰 Stanley Fatmax V20 Battery Holder Keep your workspace organized with this easy-to-print Stanley Fatmax V20 battery holder ! Designed for strength and simplicity — no supports needed and prints cleanly on most printers. Features: ⚙ Fits…
Lens cap is designed to use a light interference fit with the largest diameter of the lens house nearest the camera body. Tether loop is designed for small split ring lanyards for flash drives and dongles (see image below) Amazon Link:…
Tool holder for Craftsman V20 18 Ga. Cordless Brad Nailer, extra clearance for hanging tool when not in use. Simple, easy to print. No supports needed. Print on edge as pictured.
I made this model to have a perfect fixed position for my water meter gateway sensor on my Elster/Honeywell v200 water meter. There comes a holder with the gateway but it is one size fits all and I found it hard to have it in the right…
Description Material: PLA/PETG Layer Height: 0.10 Infill % : 30 Supports: None Print Orientation: Default as modeled, or “face-down”.
Resized the original to fit. Opened the top of the charger hole so the phone can be easily removed w/o unplugging it. Has a notch in the back for fingerprint sensor/camera access. The volume buttons are obscured since they're on the left,…
I really like the boruit flashlights (I have 4 different models lol) and wanted to have it mountable on my bike. It's light is 180° adjustable so it's nice to quickly adjust during rides. Thanks to adjustability of the light it can be…
Description Cordless tool battery adapter. Dewalt Battery to Stanley Fatmax V20 tools Extra hardware spade connectors wire fuse terminal x3 M3 x10mm bolt & Hex nut x3 10k ohm resistor 6x30mm spring, might be able to use a pen spring Prep…
There is a model online someone is selling for the V20 charger that is not public. So i decided to take inspiration from that and simplify it so it only includes 1 screw to mount. I also included my fusion files that has the outline of…
For better customizability and strength it is now printed in two pieces that slide together. Test pieces were “hammer fit”, but the final pieces printed from Prusament were not that tight, so I secured them with a drop of glue before…
VIVO V20 Pro Phone case with custom K letter on the case, comes out beautifully. Print Slow. First layer if there are few gaps, its ok let it print, second layer will cover it.
PLA/PETG 0,2 mm layer height 15% infill No support (print on side) If You are glad with my work You can buy me coffee: https://ko-fi.com/szarkadiusz
Cable Holder for IEK SV20+2 with Ebrom H05V-K 0,5 mm² How you can use the Files: Kabelhalter_SV20+2_V3_offen.stl between SV20+2 and plate Kabelhalter_SV20+2_V4_gesenkt.stl for use without SV20+2 as Cable Holder Used screws: 3x16 Spax…
Rat Rig V-Core 3 - Enclosure 2.0 side panel for electronic, this panel is not in the original package of panels for the Enclosore. If you use textured print sheet print one mirrored to get the textured side out.
Adapter to put stanley fatmax v20 tools on skadis boards
PSU Mount for Genius 4 Port Smart Receiver board(s). This is designed for the 2023 edition. This PSU Mount has 2 designs, each fits a different size PSU. PSU Options Available MW LRS 350 - Fits standard Meanwell/Generic PSU's MW LRS 600 -…
Simple bracket to wall mount a stanley fatmax v20 single battery charger (sfmcb12 type 1). Easy to slide out for mobile use. The main load should stand on the charger's pads (up to a point...). Takes 3.5mm screws. Use top or bottom to…
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
V6 Extruder Cooling Fan Cover dzino3D v2020, Fan 30x30x10
Ratrig Elektronic back cover V200 files for print and lasercut
This is an original and final version of my VersaTrack battery mount for the Craftsman V20 series batteries. The primary objective was to simplify battery access. Additionally, I incorporated features to make it easier to add or remove…
I followed the dimensions in the picture, but they are a little off. just use M4 or M3 screws. M5's for the 2020 part
it's connected to the grinder with a screw on the native mount point best to print with supports
X CARIAGE dzino_mini_v2021_6.2 V6 Bowden hotend mount
Simple Endstop mounts designed for 2020 extrusions. I designed these so that I could add a second Z endstop for my right motor on my Anet A8 Plus, but this should be compatible with virtually any 3D printer that uses 2020 extrusions.…
this is meant to be mounted on the side of the rail system to save space build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
T-spline Spiral Vase designed in fusion 360, print in the orientation of the model with no supports.
PSU Mount for Genius - Dual 4 Port Smart Receiver Controller Mounting system. This is designed for the v2023 model, the one with 3 screw holes. This is designed to be used in conjunction with our HP PSU Straps…
This is the OpenIPC VRX case model. It has been designed specifically for the Eachine EV200D goggles, with no consideration for other products' goggles. Since the goal was to achieve a compact size, a smaller BEC must be used to fit into…
Pololu S18V20x Regulator Enclosure - OnShape design is available here: https://ncssm.onshape.com/documents/9e933de65a1c4
A vertical stand for the V20 Visio Sound bar
This is just a dump of some custom parts I designed for the Getac V200. I figured I'd dump them here before I ebay the computer itself. The handle requires 2x 1/4 in by 1 in screws and matching nuts. The handle mount requires 2x 12in x…
A Frech Cleat Mount for your V20 Stanley FatMax v20 Battery Chargers Suits 12mm Thick Cleats
DeWALT DWE7492 → DXV20PC vacuum dust reduction Parametric 3D-printed adapter that connects the rear dust port of the DeWALT DWE7492 table saw directly to a DeWALT DXV20PC wet/dry vacuum hose — no duct tape, no rubber sleeve, no two…
They never come with a standard size... Suits Ryobi Wet & Dry Vacuum Vacuum Internal Diameter 35.50mm Mitre Saw Internal Diameter 38.30mm
Sensor holder for KiWa/Honeywell water meter Made for M18 proximity sensor
Summary This is my design for a phoniebox, which outputs to Logitech V20 USB speakers. The design consists of a housing for the speakers, a housing for the interior, and a housing cover. What you need Logitech V20 USB speakers a…
This is a remix of the SoundBlater 2 slot cover by Voodle to fit the Protec Audio AV20P3. The hole spacing is just slightly different. Category: Other
This mount will let you attach a Garmin adapter to the headrest of the Cruz v20c. Things you will need: Garmin adapter (female) 2x M3x8 screw 4x zip tie I printed in black ASA with default settings in Prusa Slicer.
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
this is meant to be mounted on the side of the rail system to save space build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
There is a model online someone is selling for the V20 charger that is not public. So i decided to take inspiration from that and simplify it so it only includes 1 screw to mount. I also included my fusion files that has the outline of…
Craftsman V20 CMCL020 LED flashlight holder, wall mount with two holes 40mm apart. Print as pictured. No supports needed.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
Tips for printing: For more strength print diagonally (not tested vertically, may work). I printed it out of ABS for additional strength. May break if the bearings in the vacuum don't very spin well (probably the cause that broke the…
Some-thing to hang my Craftsman V20 Blower Hanger CMCBL710 with. A hanging bracket to hold the blower when not in use. Print on edge as pictured. No supports needed, but go with 6 perimeters for strongest bracket with not much more print…
Craftsman V20 4-1 Place Battery Non-Latching Holders Mount Craftsman V20 Battery Holder Mount. Includes files for 4, 3, 2 and 1 battery holders. No supports needed. Print on edge as pictured. Edit: Added files with 80mm and 40mm hole…
Simple, easy to print, tool holder for Craftsman V20 tools. No supports needed. Print on edge as pictured. Edit: Added extra long version. Craftsman V20 Tool Holder XL
Craftsman V20 Charging Station Bracket to store charger and hold battery while charging. Store the charger when not in use and attach to the battery while charging. Battery holder is taller to provide clearance for charger module. No…
Wall mount for a Dewalt DCS356B Oscillating Multi-Tool. Spacer included, just level and use 2 screws. Can be printed with PLA / PETG / ABS. I prefer PETG on this mount. Check out the oscillating blade wall mount holder here:…
Tool holder for Craftsman V20 18 Ga. Cordless Brad Nailer, extra clearance for hanging tool when not in use. Simple, easy to print. No supports needed. Print on edge as pictured.
This model uses an alternative fullsize SD-Card adapter and I wired all up with wirewrap (simple soldering should do it too) Buttons are 90 degree mounted to get them in front instead top. these buttons are also avaiable with longer…
Remix of the original only to fix manifold errors. The size and shape is perfect once printed.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
This holds your bike computer in front of the handlebars. Glue on the brow for better aerodynamics and protection.
This mount will let you attach a Garmin adapter to the front mount location of a Cruz v20c. Things you will need: Garmin adapter (male if you set it up like the pictures) 2x M3x10 flat head screw 2x M3 hex nut 2x M4x12 pan head screw I…
Just a back cover for doogee v20 pro. The original one is made of glass (Yes, it's not metal, it's glass with aluminum foil underneath). Mine broke and I decided to print a new one out of plastic. It looks really nice on a textured table,…
Flat mount so you can move the interior light off the side near the door to somewhere else, just extend the 3 wires.
Craftsman V20 CMCL020 LED flashlight holder, wall mount with two holes 40mm apart. Print as pictured. No supports needed.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
Tips for printing: For more strength print diagonally (not tested vertically, may work). I printed it out of ABS for additional strength. May break if the bearings in the vacuum don't very spin well (probably the cause that broke the…
Router Lift v2020 23.12.2019 15mm Multiplex, teilweise 2 oder 3 fach Die Höhenverstellung über ein Stellrad von unten. Eine Höhenverstellung von oben wollte ich nicht. Habe eine 1605 Kugelumlaufspindel (ca 20€) verwendet, es würde aber…
This is a remix from https://www.thingiverse.com/thing:398515 The original was too small for my Craftsman V20 drill so I re-created the basic design. The hole at the bottom/front is big enough for the front part of the chuck to fit…
I designed this safety key on the off chance that I lose the original.
