Liczymy pasujące modele…
update.. added the Chube mount. Disclaimer!! use at own risk (the camera is pretty close to the hotend) update… corrected the focus distance for VC3.1 RR toolhead and EVA 3 (November 24.) added the body for VC3.1 RR toolhead and EVA 3…
Hello! There is a modified backand toolhead mount to accomodate a CPAP cooling solution for the RatRig Toolhead on the VCore 4. It does require for the current plate to have the 4028 mounting part cut (cutting template included) as it…
Modified VAOC parts for the Rat Rig V-Core 4 IDEX to work with the Mandala Rose Works machined arms. Two of these parts are required, the rest are optional. NOTE: This set is for the updated version of the arm with the insulator pocket…
This model is a wall mount for the excellent XTAR VC4 Plus battery charger, designed for Multiboard and Multiconnect . It likely will also fit the XTAR VC4SL , XTAR VC4 and XTAR VC4H which appear to have the same enclosure but I don't own…
Hello! Here is my version of a toolboard mount for the Orbitool O2S on the stock RatRig VCore 4 toolhead. Since the endstop is in the way of the lower mounting standoff, I did not use it, only the top hole of the toolboard has a more…
Hello! Here is a mount enabling the attachment of a 60 mm PTC Heater ( like this one ) in the RatRig VCore 4. Tested in a 300 size, according to the CAD models, it should fit in the other sizes. BOM: PTC Heater (…
This is a mounting bracket/ clip for the ZOHD VC400 piggyback camera. This allows the camera to be snapped into a bracket or easy removal later. The mounting bracket also has an air scoop as this camera gets HOT during use. This is…
I modified the routing of the bowdens to attach them to the toolhead wiring. You can print the bracket without supports. The hole for the bowden is 5mm, you can easily push a 4mm bowden through. I also added a version with a 7mm hole for…
Hello! Here is a little mount for the 3DO enclosure camera kit v2 that allows to have a side view of the print area by placing the camera in the area of the belt tensioner. BOM: 3DO Enclosure Camera Kit v2 2 x M3x12 hex skrews; 1 x M3…
Remix of only VC4_3do-nozzlecam body.3mf Read the original project for details.
This is a holder for the battery charger XTAR VC4 Plus to mount it on a French cleat wall. I printed it in PLA and I recommend using organic supports as shown in one of the pictures. To assemble you'll need M4x8.1 threaded inserts and M4…
Update from nice Project to use it for IDEX V-Core4 Printers. Original Model was to long as Toolheads can pull the Z endstop for IDEX
Adapted the original one from Cristian I: Adaption of the original one from Cristian I: https://www.printables.com/model/1388826-orbitool-o2s-toolboard-mount-for-the-ratrig-vc4-to Kudos to Christian!
VC4 Joiners with Tube Insert for Titanium Tubes (with or without Clinch Nuts). Simplifies mounting the gantry since most of the spacers arent needed anymore, also reduces the weight of the joiners a bit. This mod Moves the wipers for the…
Adapts this IEC (https://www.mcmaster.com/catalog/130/1203/5428N115) from Mcmaster-carr that I used on the VC3.1 so it can be mounted to the electronics box until Ratrig decides what the solution to the 10a 120v IEC issue is.
The XTAR VC4SL has a slight issue with AAA sized cells that aren't completely bare at the negative terminal, this helps!
This mod will allow (and fix) 1204-1605 Wobblex acceptation for FUNSSOR Aluminium arm for the BRS-Z-UPGRADE 3.2 Link to the aluminium ARM BRS-STORE for the Z-Upgrade 3.2 This FUNSSOR Arms system is not yet official in the BRS-ENGINEERING…
This is a wall mounted hook extender for Karcher VC4 vacuum. Helps you hang all the extra attachments near the vacuum itself. Just put it between the wall and original hook and screw them together. The other side is recommended to be…
Заглушка для Makita VC4210; FLEX ACE; Nilfisk ATTIX и других вакуумных труб диаметром 58-59 мм.
Remixed the model to use the standard multipoints, you can use smal/mid/big thread multipoint to mount the holder (Do not use light multipoint). Original model says it's for XTAR VC4 Plus, confirming it fits VC4 perfectly.
Fixed the VAOC body from https://www.printables.com/model/1109615-vaoc-parts-for-mandala-vc4-rear-arm-updated-pocket so it fits the 6mm pom spacer for the button. The original model was only 3mm deep.
rr_toolhead_vc32h_back and for v-core 4 with MGN12H carriage
Two types of models holding a total of 3 attachments + a slide slot for the main vacuum head tube. Printed using PLA with a 5% grid infill. Project files contain all print parameters for my Ender 3 V3 SE. Please check both the standard…
Drilling jig for the front tensioner on a RatRig V Core 4. It is suitable for all printer sizes It can be additionally fastened with M6 screws and slot nuts. It is drawn for a 4.1mm drill. I printed it with 4 walls and 15% infill.
BOM: 2 x M3 x 8mm (or longer) screws 2 x M3 hex nuts
I have modified the XY Gantry Holders for my vCore3.1 500 to be able to fit the Toro Tube for the vCore 400. Al the mounting holes have been updated. You still need to cut the Rail slightly to accommodate the move of the rail holes and…
A remix of Scorf's holder for the Xtar VC4 charger so it now fits the Honeycome Storage Wall. Supports are required to print the wall mounts.
Adapters for attaching a Makita VC4210 dust extractor to Mafell Erika 60 E dust port using the quick connector of the vacuum hose. The same vacuum attachment is also found on Nilfisk Attix 33/44 vacuum cleaners and presumably most similar…
Adapters for easy charging of AA and AAA batteries in the VariCore VC4 charger.
When I first bought this charger, I noticed it getting very hot during 4-cell capacity testing. So I designed this cooling stand that cools both the cells and the charger while keeping everything at a comfortable 45° angle. Assembly is…
A simple xtar vc4 vertical gridfinity holder Also check the battery holder from Dalkain
