Liczymy pasujące modele…
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
Vertical stand for MacBook with holes for ventilation. I found giahuy2201 's model but I noticed that it was missing holes for ventilation. So I added holes on one side for better ventilation and hole design matching the entire piece.…
Wydruk około 5,64 €–6,89 € nettoWstępna wycena jednego wariantu
This model is a modified version of the vertical stand for the 2016 MacBook found on ThingiVerse: https://www.thingiverse.com/thing:2130027 It has been adapted for the new 14" MacBook released in 2021. The slot matches the curvature of…
Wydruk około 4,44 €–5,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When using my notebook at home, I connect it to a usb-dock and need to securely store it on the side of my desk. So I made this stand to have it stored neatly and provides good air flow for cooling. This model consists of two feet and a…
Wydruk około 2,46 €–3,00 € nettoWstępna wycena jednego wariantu
My family does a lot of video calls with grandparents and the kids faces are always in the bottom of the frame and the angle is just terrible. The phone stand is a must for long calls so just holding it won't do. This stand might not be…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Remix of @formulagp46 MacBook Pro 2020 Dock to accommodate two MacBook Pros in vertical orientation. I've checked this with both Intel and M1 13" MacBook Pro 2020 and with my wife's Intel 15" MacBook Pro and they all fit nicely. Will…
Wydruk około 9,72 €–11,88 € nettoWstępna wycena jednego wariantu
Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
Requires supports, do not scale it (the laptop don't fit in that case), 40% fill. 31/12/2023 - Updated Stl, Gcode and 3mf files. Added Step file.
Wydruk około 10,40 €–12,71 € nettoWstępna wycena jednego wariantu
Design is a simple “foot” that supports a laptop vertically. Print two. "It's better than balancing your laptop on its edge!" Can be printed upright or on its side, no special settings needed. There's enough of a gap between stand and…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
As model name says, was part of my overal project to tidy my place a bit. Using my old CFW PS3 as media player i have to flip it vertically, but original stand is on the oposite side make it hard to access BD drive for me, later i next…
Wydruk około 7,74 €–9,46 € nettoWstępna wycena jednego wariantu
I designed this because I wanted extra desk space. You can mount the laptop either closed or open, if you wanted to still use your laptop screen when it's docked. The front of the stand features an opening so you can still use the…
Wydruk około 5,83 €–7,12 € nettoWstępna wycena jednego wariantu
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
Wydruk około 6,13 €–7,50 € nettoWstępna wycena jednego wariantu
This model is a replacement for the included desktop charging stand. It was designed to be wall mounted and use the original power supply. It has several parts and requires some specialized fasteners which can be found at most ACE…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey all, I'm back again, this time with an almost vertical laptop stand. I needed a more vertical stand for my desk so I changed up my standard stand a bit. Takes up a bit less real estate and puts the monitor a few inches higher. I also…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Laptop on the photo is Lenovo IdeaPad S340 15,6". PETG, 3 perimeters, 20prc infill.
Wydruk około 3,64 €–4,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for your phone that is able to change it's orientation There is four part to print the plaque and pivot needs to be screwed togrther with two 15mm wood screw
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
I saw here a quality gauge for vertical embossed text. But I needed also an engraved version to see the quality of the text when designing it in Fusion 360. Therefore I made one that is smaller and prints faster too. The smallest text…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Model allows the phone to be charged in horizontal and vertical Alignments. The model also contains a space for a wireless charger. The size of the wireless charger can easily be changed in the model by changing one sketch dimension.…
Wydruk około 7,04 €–8,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by the grandeur and elegance of Roman vases, this classic curved flower pot marries traditional aesthetics with modern functionality. Its wide, graceful silhouette is adorned with thin vertical lines that trace the pot's…
Wydruk około 23,89 €–29,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, vertical box for 3x5 notecards or recipe cards. Extended lid for using tabs on the notecards.
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Home Assistant Yellow stand for mounting device vertically, Printed on a Prusa Mini+ using Paramount3D PETG filament, but any filament is fine. Normal settings at 0.2 layer height.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created simple hook as replacement for broken one on my vertical blinds. It was made more rugged. PLA should be enough.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Double vertical stand for laptop. Thickness 34 and 29 mm. 1h39 on my Kobra 2 Neo No support needed.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
This is a simple business card holder. It's 2.72" (82.55mm) high (X) 2.8" (73mm) wide (Y) and 2.7" (69mm) thick (Z) in full with a stand on the bottom and holder with tabbed ends on each side. I made it for some vertical business cards I…
Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu
Updated (v2) - the first 2 photos show the original v1 model, and show how the buffer weight puts too much curve on the PTFE tubes to the MMU3. Changes in v2: Angled the buffer mount so that the buffer-to-MMU3 PTFE tubes are vertical as…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You might want to use the 50% height option to save materials and printing time depending on how stable you need it to be
Wydruk około 5,84 €–7,14 € nettoWstępna wycena jednego wariantu
Large, round beads for vertical friendship bead garlands. Single-sided for non-mmu printing. Cheri font used. 90 mm diameter, 20 mm width, 5 mm teardrop hole for stringing with 5mm macrame cord. Simple end beads with two small holes for…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
With PrusaSlicer slice the model with a layer height of 0.2mm. Add a pause command at layer 63 (12.6mm layer height). Don't be confused: The pause command takes effect at the beginning of the layer, the slicer shows previews of the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Update vom 30.1.2025: Kamera Befestigungschraube in neuer Version mit Einfädelhilfe zur leichteren Verklebung Nun einfach Kleber flächig in die “Einfädelhilfe = überstehender Rand” auftragen, aufsetzen und drehen bis die Rändelkappe…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
The normal size hasa 160mm internal (max roll size) and 32mm post diameter (max hole size). A new jumbo version has a 180mm internal and 38mm post diameter to accommodate larger rolls. After adding the towel roll with the end free,…
Vertical laptop stand with different options for an inner gap to fit variable thickness. The model is printed in 4 parts to avoid supports and to have nicer surfaces: 2 sides and 2 bottom brackets to hold everything together. Assembly…
Vertical stand for PS5 Slim Compatibility: PS5 Slim Digital edition (also compatible with: https://www.printables.com/model/692260-playstation-5-slim-vertical-stand-digital-edition ) PS5 Slim Disc edition PS5 Pro edition Hardware…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
A fully parametric vertical laptop stand for one or more laptops (originally designed for the Framework Laptop 13 ). You can easily adjust the laptop thickness to support other models. I've included STLs for single, dual, triple, and…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from above, the intricate latticework reveals a captivating…
Vertical egg dispenser. Great for saving space in the fridge Can take up to 20 large eggs depending on side. tested ok My first design! You may need to shrink before printing for small eggs to print without support split one of the…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
Another empty spool project! This design is vertical to support a larger number of small removable bins. https://youtu.be/jEJRSixYPKs https://youtu.be/TCCuzT0m3fg Printing and Installation Tips The stand is highly recommended since it…
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
Modular Vertical Paint Rack This paint rack system is targeted at those who are looking for something customizable that can be changed down the line by swapping shelves out and removing or adding tiers. It was designed for ease of…
Surrogate Nintendo Wii U Vertical Stands. 2 models, one can accommodate optional 6mm rubber feet (see pictures) If you enjoy or find this model useful please make sure to click the Like button. Thank you! Layer height: 0.3mm Infill: 15%…
These seven slot, vertical, AR-15 magazine holders can be mounted with either a female threaded magnet, or screwed to the wall (pre-centered holes provided). If using magnets, I would recommend at a minimum three 25lb+ Neodymium magnets.…
The Shade Foregrip is a vertical foregrip designed for Nerf and Airsoft. This grip can be attached to Picatinny-Rails aswell as Nerf-Rails without any modification or adapter. Notches in the top allow the grip to be locked in different…
If you have a Playstation 2 and want to save some space, I designed these simple stands to hold them upright. There are models for both PS2 Fat and Slim consoles. Fit all known revisions. Add some rubber feet to the bottom of them to keep…
My sister and I came up with this design to hold her documents and papers vertically, in order to save some space on her desk and keep it tidy. The holder has four slots, each one being 10 mm wide. We also added a small tray on one side…
A small wind turbine made from ApolloX material, perfect for outdoor use in your DIY weather station. This model uses a bearing to easily turn. (A 608 bearing) Used materials: FormFutura ApolloX If you want to see more follow us on **…
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
This is a remix of https://www.printables.com/model/253408-customizable-lego-compatible-text-brick-key-fobs While the original creates a perfectly fitting LEGO brick, the ring to which you attach a keyring lies flat on the print bed. This…
Model is inspired by https://www.printables.com/model/124247-macbook-air-m1-2020-stand Changes from original model: changed vertical slot to hold m1 pro without tilting slightly increased height and with added fillets UPD: added small…
UPDATE to the UPDATE : First change, I rotated the front ends to better hold a keyboard when you want it out of the way. Second change is that the connecting rod holes are now static (old model used one of the infill holes which could…
(Update 18/07/2025: Added a third file with mount tabs next to record button as per a request. There are now a few different versions.) Wanted an easy to use & low profile vertical mount for my Hero 9 Black, so sketched this up in Fusion…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
This model was requested by a friend of mine and is inspired by a beautifully designed but very pricey bike wall mount. However, I built an individual version myself from scratch and am happy with the result. So let's share it. It's…
I designed this PlayStation stand to allow the console to sit upright vertically. This is useful for consoles that have optical disc emulators installed such as XStation, PSIO or MODE. All ports are available as well as the parallel port…
Update 25.03.2024: Added a parametric and customizable version of the stand. Improvements The model was developed to enable fast and material-saving printing and at the same time to be stable. The print in size 25mm requires only 42g of…
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
The model is about 8 cm in diameter. It serves no other purpouse than rotating in the wind and looking cool. The design uses a 608 bearing in the center of the turbine. All the parts should be idealy printed without support, especially…
Fit runner size of 2.0, 2.5, and 3.0 mm.
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
I've been looking for a vertical stand that would hold the (larger) horizontal feet and the hole plug. All the ones I found with recesses were for the (smaller) horizontal feet of the digital edition. I imported the STEP file into Fusion…
A small bracket that functions as a vertical laptop stand that can hold a portable monitor to function as a 2nd screen. I use a Lenovo Legion Y530 and an Arzopa S1-Table portable monitor. 2 brackets are required, and they can be printed…
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
Update September 11 2022 - Changed the braces to be less noticeable and made the connectors square for better printing and to keep them level. The legs were updated to fit the square pegs. Added size indicators on the parts for…
Create a minimalist and efficient workspace with this vertical laptop stand. By holding your laptop upright, it frees up significant desk real estate and promotes better heat dissipation for optimal performance. This universal stand…
A generic laptop stand I made for my MacBook Pro 13" (2015) Pretty sturdy Single easy print, without any supports. Laptop-stand-20mm.STL Fits upto 20mm laptop My laptop is approx 18mm thick. So the stand is designed with a space of 20mm…
The OG Xbox is a big chonker. Save some space and stand it upright. Bottom of stand has vent cutouts so the Xbox case can still breathe. I recommend placing rubber feet on the bottom of it to maintain air flow and so it won't slide around.
I have a work light over the printer that casts a shadow of the print head and it was very difficult to see what was happening at the nozzle both in person and with the OctoPrint webcam. It's interesting that most of the existing lighting…
Print list: x2 upper x2 lower x1 central
First design to stabilize PS4 when vertical and to improve airflow/cooling. Print 2 pieces. No supports needed. PS4 not included.
This sponge holder can hold up to three typical sized dish sponge in a vertical orientation. The sponge holder measures 90mm wide and 130mm deep. Each sponge slot can accommodate 30mm thick sponge. It is intended for use with an…
Choose a model that fits the height of your laptop. If the height is the exact number, it may be better to choose a higher number for the stand.
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
🌿 Modular Vertical Planter Bring nature into your home, office, or workspace with this modern modular vertical planter system. Designed with elegant wavy-textured pots and a sturdy freestanding structure, this planter helps you create a…
I like how Ace_D remixed the Switch portrait holder with the comfortable grip. However after printing his design I found several issues. The right handle is largely separate from the center piece. The console fit is very tight. There is…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
Vertical stand for PS5 Slim Compatibility: PS5 Slim Digital Edition (v1) (Not compatible) PS5 Slim Disc Edition (compatible with: https://www.printables.com/model/693226-playstation-5-slim-vertical-stand-disc-digital-edi ) Hardware…
Screw mounted holder for 2x Video game controllers. Works with Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5. Purchase it here :) https://www.etsy.com/listing/1768995799/double-controller-holder-for-xbox-ps5
Note: there is also robust heavy duty vertically printed mode: https://www.printables.com/model/337795-parametric-hinge-vertically-printed-robust Info: i have remodelled and made a great model from @Meistel Edel (thx!) parametric , so any…
I found this Ugrinsky style windmill on thingiverse (Yuck! I know…) but I didnt find the parts supplied that useful apart from the blade design, which is awesome. I made some simple brackets and other printed parts needed to experiment…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
Vertical grip that mounts to mlok rails. Stubby version included. Feel free to comment or message me if you need any help!
Just another vertical laptop stand... but this one has a flexible hinge at the bottom that adjusts to the thickness of your laptop. Nothing screams "I'm a maker" louder than this simple piece of 3D printed plastic. The thin layer in the…
Vertical Stand for Oculus Quest2. Foe added functionality see: https://www.printables.com/model/404773-oculus-stand-vertical-elite-add-on
You can use this stand to keep your iPad air 2 at vertical or horizontal as per the pictures.
A spring button design element. Print it out, see how it works and use it in your own designs with the shared plasticity file. This design prints in place, vertically. 0.16mm layer height.
I wanted to mount my PS5 vertically on the wall after mounting my PC on the wall a few days prior (Don't judge the visible wires… I was too impatient to do cable management before taking these photos to share with you 😁 ) . Due to the…
Works with motors up to 40mm in height and have the nema 17 standart. Wall line count should be high since they will endure the pressure of the screws I used 7 but 5 should be enough. Print with legs straight up not on it's side(like the…
Print twice or use the single model.
A simple and easy to print stand to hold your laptop vertically when it's not in use or when it is plugged into a monitor. I designed it to fit a DELL XPS 15 (which is about 25mm thick), if you need another size just let me know and I'll…
