Liczymy pasujące modele…
If you want to sell my Enders in your Etsy Shop or any where else please subscribe to my Patreon Commercial Subscription $8 = Authorization Badge patreon.com/ProjectLowk Assembly instructions: Snap the Pieces together and use super…
Introduction “HAWk” is a flying wing concept designed for RC hobbyists that feels just as good to fly as an RC plane made from conventional materials. It’s printed in light weight PLA (LW-PLA) with most pieces in vase mode for maximum…
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
Become the greatest swordsman, Dracule Mihawk with this quick and easy print! Requires: 1x Blade 1x Sheath 1x Handle Recommend print all parts vertically 2-4 walls 20-30%infill When assembling, apply light heat to the sheath, ensuring…
Mask from V for Vendetta movie. Reupload of the https://www.thingiverse.com/thing:23457
There are already several Seahawks logo models on the internet, but I wasn't happy with the quality of them. The smooth curves always had straight segments which ruin the look, especially when scaled large. So, I made my own version from…
The Hawker Hurricane was the workhorse of the RAF during the Battle of Britain , mass produced yet massively effective in its roles of repelling the Nazi war machine from British skies, with over 14,000 being produced over the course of…
This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407
This is a Logo Stand form the NFL Team Seattle Seahawks.
The model of a cable car including the bottom and top station and a cable car cabin I have made for my son. To be completely honest, I probably had more fun in designing and building it then he had playing with it later, but he still…
12-03-25 Update: I had a request to make a version of the sword with a hole included in the blade to slot a ½" (1.27cm) wooden dowel inside for strength at conventions so those should be in the files section. Mihawk's legendary sword Yoru…
Glinthawks are easily the most annoying machines. But someone has to clean up all the scrapped watchers, so I guess I'm thankful for them anyways. This machine is to scale with the official board game and stands on a 30mm base. It is…
A wall mount for the Nighthawk M6 Pro. Has a cutout so you can plug in power, Ethernet and antenna connections. Print with the back facing towards the build plate and with supports. For supports that are painless to remove, use these…
Passionate about aeronautics, it was for meunthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model with the double slide and lock…
Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.
About MK1 Starhawks The Starhawk is the crown jewel of the New Republic Navy. Constructed from disassembled Star Destroyers, Starhawks exceed every standard of their time and can defeat Imperial Star Destroyers with ease. The MK1 Starhawk…
My Step-Dad worked in the Lockheed Skunkworks when they were developing the F-117 - though he swears he didn't work on it. (wink wink) Anyway, I made this for him as a Christmas gift - and printed it 'transparent' because it was…
Developed by BAE Systems, the Hawk was initially developed as a light sub-sonic trainer jet for the RAF, but is found worldwide used by many nations either as a trainer or low cost light combat aircraft. Used as the primary aircraft for…
This is my rough model of the Tomahawk BGM-109 Cruise Missile.
About the F-117 Nighthawk The Lockheed F-117 Nighthawk is a retired American single-seat, subsonic, twin-engined, stealth attack aircraft developed by Lockheed's secretive Skunk Works division and operated by the United States Air Force.…
Warrior Cat. Riverclan Hawkfrost.
-raspberry Pi IR nightvision camera MakerHawk case and mount -case mount holes are 4mm in diameter -the cover is simply put on the case Print instructions support is only needed for the cable gap in the camera case
Check out my Patreon for the latest models and extra files! This model has tons of moving parts! Model Info 25 Parts About 10cm long 60g of weight 4.6 hours total print time with stock settings The single STL files have already been…
Mohawk for the Mega Lego-like Minifigure (10:1 scale) to make your own punkrocker. The pin is the original from the minifigure and you need 5 pieces for the mohawk. After printing glue both halves together, if the fitting onto the head is…
EDIT: Permanently moved to Makerworld. Link: https://makerworld.com/en/models/532905-protogen-mk2-neo-v0-3-m16-x-snowkat This is a rework of the original MK2 Protogen by M16 Studios! All credit for the original models goes to M16 Studios.…
I designed this for DUMMY 13 goes to COMIC CON - Assasin's Creed. You may also find this useful for your project. Have fun!
My first contribution on Thingiverse and first design. This is a 3D printed USB Power bank based on MakerHawk 18650-Board (H961-U v3):…
After receiving a message from Quantum Kitten aka Kala, I decided to have a crack at sprucing up this model. Thanks for the Links Kala. Do check the sizing suits your needs and see attached different variants in regards to finished mesh…
Print and surprise your partner and friends
Introducing the Guy Fawkes Half Mask. For optimal print quality, it's recommended to use support structuring during the printing process. After thorough experimentation, tree support has been proven to be the most effective and…
Pigeons like to breed on my balcony, so I made this hawk silhouette. It comes in 3 versions - small (1 part), medium (2 parts), and large (3 parts). I recommend gluing the pieces together and hanging the hawk by a wire, so that it moves…
Mount a Nitehawk USB adapter on a Din rail to mount it. 5 insertnuts D4.6 are required
Seattle Seahawks Logo Keychain
This model is compatible with the lego system.
As a speacial request to Matthew, I have included the original file from Caiquecca for reference only. So Ive done two models one to print for cosplay as a wearable helmet and the other so you can drill a hole in the bottom and add it to…
For mounting a Netgear Nighthawk M1 on the wall. Update 2023-03-02: Version 2 has some nicer fillets and don't hide the feet that can be removed to access the connections for the external antennas
This is a pretty good rendition of the F-117. Best printed on Ultradetail 0.05. The angles of edges will have ridges or lines if you don't print in this mode.
88mm Kwk 36 HE Shell This Shell was used in the Tiger I Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. It has been designed to fit the projectile by AskaLooN…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Scanned using Reality Capture and touched up in Meshmixer. Pink is the original and the black is the copy. I recommend using a raft and supports for the belly. Print instructions Category: Animals
I designed and use these for my Nitehawk-SB based Stealthchanger build. Print from ABS/ASA or other high temp/strength materials. Uses two 2mm wide zipties for indirect tensioning. Allows for two 1mm lengths of piano wire to run through…
Just a short angled fore grip which fits exactly on the picatinny rail. Have fun :) Lenght: 89,9 mm Angle: 30° Barrel cover: https://www.thingiverse.com/thing:2886730 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't…
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
The design of this throwing axe is inspired by the Tomahawk from the first installment of the Call of Duty Black Ops series, released in 2010. The Tomahawk was made popular by the multiplayer game mode Sticks and Stones. I recommend…
This is a case for the Netgear Nighthawk M1, M5 and M6 that can be placed on a table or mounted on a wall. To mount it on the wall, a wall bracket is attached and the case with the device is slid into it. This allows the device to be…
About Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland Not a biggest fan of PG-7 cable glands (like me) and willing to make safe and secure LDO Nitehawk-SB USB cable strain relief using Galileo 2 Extruder ? This one is…
I absolutely loved tacohittah's ornament , but I wanted a bigger version on a stand as a display piece. I closed the hole on the ornament, made it 300% bigger, and added a stand with the IOWA branding as an inlay. All of the pieces are…
I hadn't realised the differences between the two helmets from Destiny 1 & 2 Any queries give me a bell. Do check the sizing suits your needs as in its unsized, Cheers Jace Category: 3D Printing
Jurassic Bawk sign, extruded at 4 layer heights in order to either manually swap colors at different heights (which I did), or to manage color changing layers using an AMS/MMU. Prints just fine under normal 0.2 settings with 15% grid…
Podstawka dwustronna na tablet i telefon. Zmieści się tablet, który ma 26 mm grubości i telefon, który ma 14 mm grubości. Masz do wyboru dwa pliki .3mf. Pierwszy bez grafiki. Drugi z dodaną grafiką topora. Model nie wymaga podpór jeśli…
idealnie odwzorowane logo wk dzik jako brelok
Just a quick modification of an existing design to add extra length on the strain relief to enable it to be used for the Nitehawk36
Berserker mech from the game HAWKEN. The zip file contains printable parts. Legs, cockpit and arms are movable. For most parts printing with supports from bottom is adviced. I printed my make at 30%
Print with Organic/tree supports at 0.2mm layer height. Can do multi color, wipe tour over infill color change recommend
This model is compatible with the lego system.
Easy print. The pieces are separated to print multi-color. Use CA glue to hold it all together. You can use the “Jayhawk_Head” if printing with a MMU.
This is my 1:16 Scale RC Global Hawk drone model. This project is a continuation of my Ardupilot series and it combines many new interesting solutions like V-Tail, Flaperons, Skis and Electric Jet Thruster. It was also my first time…
I wanted to create an MMU3 Buffer mount to use with overhead spool management, which minimized both the modifications to any Prusa ecosystem and the number of filament path bends. I use it with the RepBox from RepKord , but you can swap…
Seattle Seahawks 1st Layer White 2nd Green 3rd Blue
The Powkiddy RGB30 is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.…
This is a custom made model built from SVG specifications for the Seattle Seahawks' logo. The Cutter has a easy to extract edge around it. The mold embosses the details of the logo into the cookie. It includes a handle which can be…
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
Here is the awesome looking Seattle Seahawks Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
This was modeled directly from the Rev C (v1.4) Nighthawk 36 CAD, and adds a couple features above and beyond what other offerings currently have. There are wire management hooks to hold wires in place. Zip ties can be used around the…
The Sikorsky UH-60 Black Hawk is a multi-role military helicopter developed by Sikorsky Aircraft. First introduced in the late 1970s, it has become one of the most widely used utility helicopters in the world. The UH-60 is known for its…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bring the Marvel universe into your collection with this highly detailed 3D printable figure of Hawkeye with Baby Groot perched on his shoulder. This unique collectible captures the perfect balance between action and charm — showcasing…
Skyhawk 172 Silhouette Wall Art model. adjstable size.
Sollte der Router zu eng in der Halterung sitzen ändern Sie den Parameter “Spalt”. Zur Zeit steht er auf 0,3 mm. Mit 0,4 oder 0,5 sollte der Router leicht in die Halterung ein- und ausführbar sein. Meine Halterung ist im Wohnmobil…
I have a CWWK Mini Fanless PC running OPNsense firewall. It gets a little warmer than I'd like with no fan, so I designed this mount to hold a fan on top of the heat sink case. The case supports an 80x10mm fan on the bottom, but the CPU…
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
Magnet based on the F-117 Nighthawk. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
Celebrate one of the greatest minds in modern science with this stylized 3D printable bust of Stephen Hawking . Featuring his iconic glasses, asymmetrical smile, and a thoughtful gaze, this collectible sculpt captures the essence of the…
Seahawks logo ready to in two colors. Category: Signs & Logos
Printed with 0.16 mm layer height in PLA. Length is 15 cm, you might want it a little smaller. Modeled after the Hawk Raider sword from the Golden Age arc. Kind of big, to be comfortable for use with the big hardcover berserk manga. May…
Vanguard mech from the game HAWKEN. The zip file contains printable parts. Legs, Shields, cockpit and arms are movable. For all parts printing with supports from bottom is adviced. I printed my make at 25%
Here is an accurate model of the F-117 Night Hawk. It is worth noting that to my best knowledge, the structure is scaled to the actual aircraft. I also included a model without the internal structure that is a lot easier to print. I…
Remixed from https://www.printables.com/model/184911-iowa-hawkeyes-decoration by Dylan2868. Changes fixed thin walls made logo and border flush added some thickness to black layers to give it some additional heft added hole at top to use…
Repo Man Punk Skull With Mohawk Bit of a dud. The LA map did not transfer to the skull. and my attempts to decimate it after applying the map… ended up just turning it into a low poly skull. Even with 300,000 tries… it decimated into…
EN: This is a remix of Jacoza's comfy, thumb-supported Tomahawk Slingshot . Jacoza's design works with flat rubber bands. I needed a version for 5mm tubes and this is the result. In addition to the remix, the 3MF file also contains…
This model is compatible with the lego system.
Polecam do kamery
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*From Wikipedia: The BGM-109 Tomahawk Land Attack Missile (TLAM) is an American long-range, all-weather, jet-powered, subsonic cruise missile that is primarily used by the United States Movie and Royal Navy in ship and submarine-based…
A simple logo version of Taylor Hawkins' hawk tattoo…RIP Taylor. Printed using Atomic Filament's Black Marble PLA.
I had a Blackhawk Omnivore holster (that I'm assuming uses a standard Blackhawk mounting pattern, so this should work for other Blackhawk holsters as well) and I wanted to mount it to my Safariland belt rig. Made this adapter in Fusion…
The RP2040 chip of the LDO Nitehawk SB toolhead board gets very hot with an enclosed chamber and is also mounted on the back side of the board facing the extruder motor which adds to its heat exposure. For a 55C+ chamber temperature I was…
Requires one din clip available here: https://github.com/VoronDesign/Voron-Parts/blob/main/DIN_Mounts/din_clip.stl Requires 2 M2x10 self-tapping screws for securing the mount to the din clip. Requires 3 M3 screws for securing the USB…
hello, this is my conception of headphone holder, i made space for important usb in front of project, above is place where you can put your pencil or stand your phone, in front of this holder is text PC Masterrace. project match to qube…
Scout mech from the game HAWKEN with movable parts. Individual printable parts in the zip. I printed my make at 30%. Print with supports from base adviced.
Instructions The Printed parts need to be glued together you dont need any supports, just a good first layer wich will stick good to your bed. Tips Use some glue wich is transparent watch this YouTube video if you dont know what glue to…
Introducing the Modern Hawk Statue – a powerful and elegant tribute to this majestic bird of prey! 🦅✨ ✅ 90mm Tall – A striking addition to desks, shelves, or display cases ✅ Minimalist & Elegant – A modern take on a fierce predator ✅…
