Wyniki wyszukiwania: x55

Tp-Link Deco Wall Stand for x10 x20 x50 x55 X60

Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.

Ammo Box Swedish Mauser 6,5x55

I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…

Scharnier 80x55x16(7) L-B-H

Stabiles Scharnier in den Abmessungen 80x55x16(7) LBH Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill

Gridfinity Baseplates for IKEA Malm Drawer (40x55cm small version with 2 drawers)

These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…

Ventilation 110x55mm to 100mm Ø 90 Degree Bend V2.

NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…

6,5x55 Mauser ammo box

I got a request for a 6,5x55 ammobox of the new model i make. I made 2 sizes for the shell 12,42mm and 12,60mm. So you can choose if you want a little tighter fit or not. I made a o-ring to fit the lid but it's made for 2mm o-ring string…

Power socket cover / Steckdosen Blende Abdeckung (55x55mm)

The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.

Linksys Atlas Pro 6 Velop (MX5500) Wall Shelf

The air intake at the bottom of the unit is unobstructed. There is a cut out for connecting the power supply plug. You can route the cables to either side, or underneath the shelf. The buttons under the unit are accessible. The unit locks…

Rectangle Ventilation 110x55mm Angle 90 Degree Upright - Updated

This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print result for overhangs. See…

120mm fan mount for 110x55 retangular ventilation duct

I exported a "strait" option that allows mounting the ventilation duct in line with the fan if you need that. The “side” version is the one I used to extract air from a cabinet as shown on the pictures. The cabinet is used a cat litter…

X55 X56 HOTAS Desk Clamp remix v3

Remixed to use a metal clamp I located on Amazon . Here is the link: https://www.amazon.com/gp/product/B07BHXXR4D/ref=ppx_yo_dt_b_asin_image_o08_s00?ie=UTF8&psc=1 WALI C-Clamp Base Stand Mounting Accessory for WALI Monitor Mount…

Tikka long action 3,56'' AICS 10 & 6 round mag 6.5x55

6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…

Ammo box for cal. 7.5x55 (SWISS)

Box for ammo cal. 7.5x55 (SWISS), can hold 35 ammunition. Very useful for sport shooting 300m with Schmidt Rubin K31. For this Box you must add 8 parallel pins (ISO 2338) Ø5 h8x18 (if you can't find it, you can cut a bar of any matirial…

Filament Sample Card 85x55mm (Business Card Size)

I designed this Sample Card in a Business Card Size. The Fusion360 model is customizable.

TP-Link Deco AX3000 X55 Router Wall Mount

Small wall mount for the TP-Link Deco AX3000 X55 Router. It has two versions, one meant to be used with 3M Wall strips for clean mounting and removal, and one with a screw hole. Arch design supports the weakest area of the print so it…

TP-Link Deco X55 ceiling mount

This is a ceiling mount for TP-Link Deco X55 wireless mesh router. If you plan to use this model for replacing a WDR4300, the holes should fit. (123mm) You will need additionally: 2x M3x8 screw 2x M3 heat inserts (4.1mm outer diameter)

Rectangle Ventilation 110x55mm to 100mm Ø V2

NEW Version. Cosmetic cleanup and sligthly better modelled. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may have to experiment with…

Rectangle Ventilation 110x55mm Parts

This is parts for 110x55mm rectangle ventilation tubes. See also other 110x55 parts https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr And a 90 degree horizontal to verticla twist module…

6,5x55 Steyr Mannlicher ammo box. New design

I got a request for a 6,5x55 ammobox of the new model i make. The spacing is 50pcs/81,20x12,60mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string…

Fan Bracket for X550-T2 Intel Ethernet-Network-Adapter

Designed for the NB-BlackSilentFan 40mm (XM-1) Designed for PETG Print settings I used: 25% infill 4 wall loops Tree supports Rotate top side on build plate Sits very snug and firm. Free to use, free to edit & STEP files are in the…

Lego 12V Train Motor (x550a) Wheel Anti-slip Rubbers

I have an old set of Lego trains with a 12V train motor. https://www.bricklink.com/v2/catalog/catalogitem.page?S=722-2#T=S&O={%22iconly%22:0} There was rubber rings on the wheels to make good contact and friction but it is not a surprise…

X550 Quadcopter

UPDATE 28.6.2016: I've been busy last few months, hope to find time for this hobby and to finalize this project page Motor mount holes are rotated 90° in ARM_ALT.STL X550 is a Work-In-Progress - here's my To-Do list: upload some video…

Fan Bracket for Intel X550-T2 - Noctua Compatible

This is a remixed model with specific changes to fit a Noctua NF-A4x10, Though the changes should result in wider compatibility with other fans as well. Note that this bracket, and the original it is remixed from, is compatible with the…

Bullet 6.5x55 Swedish

Used as a template for leatherworking. Printed upright with PLA, 0.2 layer height which seemed to work nicely.

Logitech X55/56 - Ikea Poang Mount

This is a mount I made for my Ikea Poang for DCS, its specifically made for the Logitech X56 or Saitek X55 HOTAS. You'll need two Brackets and 2 Mounts and some hardware listed below. I've found you only need to use half of the mounting…

Powkiddy X55 Stand

A stand for the Powkiddy X55 handheld console. It can hold any handhelds as long as their depth isn't above 19mm. It's well balanced and it won't tip over. It's designed to be printed using a 0.6mm nozzle, but a 0.4mm would print just…

Rectangle Ventilation 110x55mm to 100mm Ø V2.

NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may…

6.5X55mm Swedish Stacking Loading Block

6.5X55mm Swedish stacking loading block. Category: Tool Holders & Boxes

Business card case 85x55

Prusa MK3s+: Material:PLA Layer 0.2mm Seam position: nearest Solid infill threshold area: 70mm2 Speed out perimeter: max 50mm/s No brim, no supports. You need to gently open the hinges.

Reloading tray .223 -> (243 / 6,5x55 / 308 / 3006 / 9,3x62 etc)

Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.

Ventilation 110x55mm 3-Way Flat and Upright Duct Link

This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…

Rolltop Pillbox with 55x55x1mm Slots

With 2 Slots for 55x55x1mm foil packaged meds, or paper with Meds/Contact info. Reverse slots are Indented.

Ventilation duct knees for Europlast flat system (220x55)

Since Europlast flat ventilation system (220x55) offers quite limited range of knees and missing some quite essential (45 degree) ones, I decided to make some custom parts. I added some air guides for quieter operation and extra strenght.…

Ventilation 110x55mm to Ø 100mm Pass Through V2

New version. Smaller cosmetic changes for a nicer look. and easier print. These models are parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. See also…

6.5x55 SE Reloading Block

Print this in whatever material you like. There will be some bridging, so make sure your printer is capable of it.

Rectangle Ventilation 110x55mm 90 Degree Twist

This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…

6,5x55 Swedish Mauser

You should use PLA because if you use PETG the firing Pin of your rifle could be damaged, if you dont use it in a rifle it doesnt matter.

Tp-Link Deco Stand for x10 x20 x50 x55 x60

This stand was designed to hold the classic 110mm diameter tp-link deco mesh systems series (x10/20/50/55/60) Printed with 3 walls and 20% infill.

Scharnier 100x55x14(6) L-B-H

Stabiles Scharnier in den Abmessungen 100x55x14(6) L-B-H Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill

Organiser Box V2 95x55x40mm

Organiser Box printet in PLA 0,2mm Speedprofile. No supports

Volvo 940 2 DIN Radio Frame for Sony XAV-AX5500

I love the original design done by @Ornotermes and thanks to offering the original CAD drawing I was able to use my sub-par Fusion 360 skills to make some small modifications to fit my use-case. I used a Sony XAV-AX5500 and to allow for…

Scharnier 201,5x55x16(7) L-B-H

Stabiles Scharnier mit Inbusschraube M5x50 als AchseStabiles PLA oder PETG 100% Infill

Ventilation 110x55mm 90 Degree plus Horizontal to Vertical Twist

This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…

Rectangular Duct 110x55 - Round to Rectangular #01

Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…

Intel x540-T2 / x550-T2 / x710-T2L PCI Bracket

Lost my Full size PCI Bracket for my Intel X710-T2L so I made my own! I created the same bracket back when I had the Intel X540 but it looked horrible in BambuStudio so I had to recreate it with the skills I've acquired since then. This…

Logitech/Saitek X56/X55 4 way hat cover

Designed as an alternate option for the 4 way throttle button. Slip on fit. Printing: Minimum/no infill should work No supports needed when printed from base. Shrink/enlarge to get the fit you want. Print Settings Printer Brand: Creality…

Ventilation 110x55mm Duct Wall Fastener

110x55mm ventilation duct wall fasteners and one for 2020 alu V-profile. One of the models require a M3 nut to be inserted together with a hex 16-20mm SHCS (hex socket head cap screw). See also other 100mm and 110x55mm ventilation parts…

6.5X55mm Swedish Vase Mode Stacking Loading Block

6.5X55mm Swedish Vase Mode stacking loading block. Revision History: 05/14/2023 - Fixed *-50 and -25 slot cut into lip. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…

6.5x55 SE Attachment for Region 420 Funnel System

I made an insert for my 6.5x55 SE . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.

Powersupply Case [117x55x195]

Powersupply Case [117x55x195]

Ventilation 110x55mm 3-Way Combo Duct Link

This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…

X56 and x55 comfort kit and VR helper

X56 and x55 comfort kit and VR helper, I made this when I got a new X56 and found My hand was to low to reach the top hat switch and the top button on the joystick, and as you can't see the buttons in VR, I made this so I could identify…

20rd lockable Ammo Box 6.5x55

Lockable ammo box for 20 rds. of 6.5x55

Ventilation 110x55mm 45 Degree Bend Flat

This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print and result with overhangs.…

Missle X55KC

Russian missle X55KS M 1:144 Category: Vehicles

Kitchen fume extractor window nozzle for 110x55mm

I designed this nozzle to fit between the wall and the window, in such a way that when the window is open the nozzle directs the air out of the window. It fits a 110x55mm ventilation tube. Category: Kitchen & Dining

LACK Table Wrench (55x55x45mm)

When assembling a large quantity of LACK tables from IKEA, screwing in the feet will become really hard on your hand. Therefore you can use this handy wrech to help you install the feet. This wrench has an inner diameter of 51x51mm which…

Fox 210x55 Rear Shock Sag Tool

This model should work for any 210mmx55mm rear MTB shock. The model is 55mm long with a 25% and 30% indent for proper SAG adjustment.

Ventilation 110x55mm Magnetic Link Set

This is parts for 110x55mm rectangle ventilation ducts. To be used connecting two ducts with a magnetic coupling for easy parting. On the image below, wall mounted duct is connected to a duct mounted to the backside of a Voron 2.4…

Ammobox/Munitionsbox GP11 / 7.5x55 Swiss

Sehr stabile und praktische Munitionsbox für eine Trainingseinheit auf dem Stand. Die Munitionsbox fasst 50Stk. GP11 (7.5x55 Swiss) Patronen. Herausnehmbarer Patroneneinsatz, falls mal etwas in die Box fallen sollte. Die Höhe des…

Scharnier 141,5x55x16(7) L-B-H

Stabiles Scharnier mit Inbusschraube B5x50 als AchseStabiles Scharnier mit Inbusschraube B5x50 als Achse PLA oder PETG 100% Infill

Box with 50x55 compartments

This design is a box with a lid that latches. The lid attaches with a filament hinge. The overall dimensions are driven by the number of rows and columns of compartments and their size. The Fusion 360 design is parametric. This model is…

Tool storage for metal lathe (HBM 250x550)

Tool storage for metal lathe (HBM 250x550) Freecad file in attachment

6.5x55mm Swedish/6.5 x 55 Mauser-Krag Cartridge

Vacuum block TV 145x55x50 SCM/Morbidelli

Cups for SCM

Cover Cap for Flat Duct 110x55mm

cover cap for flat duct 110x55mm (e.g. intelmann) for sleeve (113x60mm) petg → 250 celsius → 0.12mm layer

Flachkanal 110x55 T-Stück auf Rund 100mm

Material PETG 0,4er Düse 0,2 Layerhöhe oder nach belieben….. Stützen, auf jeden fall Bitte vom Schieber die Kanten etwas abrunden.

TP-Link Deco X55 wall mount

ATTENTION! Don't use this mount if you don't know what you're doing! Working on a wall outlet is dangerous! Everything you do is at your own risk, I am not responsible for any damage on people, animals or anything else when you use this!…

Tp-Link Deco X55 Wandhalterung

Halter für Tp-Link Deco X55 Mesh-System. Alle Anschlusskabel sind beim Anschluss versteckt. Der Deco rastet bei der Montage ein und ist in der Halterung fixiert. Vatiante ist für eine Dachschräge

Business card slimline case - Australian card size 90x55mm

Most other business card holder models don't fit Australian standard 90x55mm business cards. I found and really liked the design of @dhiertz but it didn't fit my cards. While at first I tried to change the dimensions in the slicer, the…

Logitech X55/56 - Ikea Poang Mount

This is a mount I made for my Ikea Poang for DCS, its specifically made for the Logitech X56 or Saitek X55 HOTAS. You'll need two Brackets and 2 Mounts and some hardware listed below. I've found you only need to use half of the mounting…

Ventilation 110x55mm 3-Way Flat Straight and 45 Degree.

This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. This model is a 3-way links for rectangle ventilation duct 110x55mm. It was updated on June…

Rectangle Ventilation 110x55mm Straight.

Ventilation tube 110x55mm straight. To be printed standiing up. Scale slicer i Z-axis to get the length you need or want. In addition to the tube is a female/female part you can combine with the male-male tube of the 110x55mm ventilation…

Intel X550-T2 40mm Fan Shroud

This is a simple slide-on fan shroud for the Intel X550-T2 network adapter. It allows mounting of any standard 40mm fan. Parts required: 4x M3 heat inserts 4x M3 bolts (length depending on fan thickness) 1x M3 plastic thread bolt (to…

Intel x550-t2 Fan Shroud

Designed this fan shroud to cool the commonly available Intel x550-t2 NIC cards that can be found on the second hand market. Needed it to remain 1-slot in width. The fan model that I used is YY7015M12B. This fan is taller than a half…

Multiboard Rail for TP-link Archer AX55 Router

Print it the same way , as your Multiboard, 3x walls, 15% infill, use Organic supports

Empty spool box 200x55

Designed for 200x55mm spool (Rosa3d) Each part has a different dimension. You have to print each to complete the circle Full cicrcle = part1 + part2 + part3 Category: DIY

7.5x55mm Swiss Reloading Tray

Reloading tray based on BexarArms template, for 7.5x55mm Swiss Two heights inside to allow the brass cases to stand securely both primer up and primer down. This should help in keeping track of which cases have been charged, as you can…

flower garden label 85x55

flower garden label 85x55 by qubee

220x55 ventilation duct angles

When mounting my cooker hood I needed small angle that I couldn't buy anywhere. Decided to make different ones and post it here so anyone can print for themselves when needed. The opening in the file is actually 220x54mm because it was…

Prusa Enclosure V2 - Bigger Lack table (90 x55)

The parts are adapted for use with the LACK table with dimensions of 90 x 55 cm. 2 MK3S+ size printers can then be placed in the table Some parts are modified so that so many supports do not have to be used. Therefore, it is not possible…

10 compartment Case 110x55mm

Customized version of http://www.thingiverse.com/thing:386904

Rectangular Duct 110x55 - 45° Vertical

Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…

20rd lockable Ammo Box 7.5x55

Lockable ammo box for 20 rds. of 7.5x55

Ammunition Box PG11 7,5x55 Swiss

This is an Ammunition Box for 7,5x55 swiss rounds, it holds 36 pcs.

openGrid rounded shelf with cable cutout (110x55mm)

A standard rounded shelf for openGrid and openGrid heavy. The dimensions are 110x55mm and a 12.5x8mm cutout has been added to the shelf to support a cable pass through.

90° Degree 55x55mm Bracket

Print with 5 perimeters & 20% gyroid infill minimum.

Clamps for Led Bridge by Andy D on Ikea LACK 90x55cm

Model very rough and badly optimized for print, but I don't need to mass produce it so I hope you find it at least helpful for you

X56 / X55 H.O.T.A.S. Switch label + Rotary Plate

Butchered my way with OpenSCAD and added the middle plate for the rotary encoders to the original design by tarpaper . The hole positions is not 100% perfect but close enough and is hidden under the knobs anyway so I didn't bother…

Asus RX550 4GB PCIe Bracket

PCIe Bracket for an Asus RX550

Business Card Holder (85x55mm)

The holder was printed with a layer height of 0.2mm in PLA-CF (BambuLab). The cards have a loose fit, preventing them from getting scratched when removed.

Grip Square plastic pipe 110x55

Attachment of square plastic pipe (air conditioning) to the wall or ceiling

Schachtel Box 250x85x55

Schachtelbox 250x85x55 habe mehrere gemacht und die Schublade voll ausgestattet.

Cannondale Topstone Carbon PDW 700x55mm Fender Bracket

Note: I also had to Dremel the rear fender a little bit to prevent it from interfering with the front derailleur on my 2x GRX.

Ikea Skadis mount for TP-Link Archer AX55

197mm between mounting point centres. Mounting wider diameter is of 8mm, narrower is of 4mm.

Łącznik wentylacyjny fi 155-->110x55

Kupne łączniki i redukcje zajmowały zbyt dużo miejsca. Zrobiłem, jak zwykle, swoją wersję.

NOCO GBX55 Button Gaurds

Simple button guards I made for my NOCO GBX55 jumper boxes.

TP Link Deco X55 3U Rackmount 10"

A 3U 10" rack mount for the TP Link Deco X55. This should fit other decos that also have the 110mm diameter

Saitek X55 / Thrustmaster X65 HOTAS spring tensioner

Simple spring tensioner for the X55 and X65 HOTAS from Saitek and more recently Thrustmaster, just slots under the spring if you've lost the original spares that came with the stick like me! Print Settings Printer Brand: Creality Printer:…

Zátka na jekl 35x55mm

Doporučuji tisknout s minimálními přejezdy perimetrů A není třeba podpěr