44 modeli
This is my wall mount design for the Asus RT-AX86U/RT-AX86U Pro router, with cable management and SSD pocket. There are two versions - one is the compact with narrow cable management for tighter spaces and the other one is the extended…
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
I purchased the Odyssey x86j4105 single board computer (sometimes called re_computer) and found very few cases were available for it. There is a $15.00 dollar metal case the manufactures sell and Akash17's Thingiverse record. But I wanted…
This is a remix of Kosmich's excellent wall mount design for the Asus RT-AX86U/RT-AX86U Pro router. I opted for a slightly lighter version with cable management with a somewhat different design. I also added holes/loops for zip ties to…
The operation of my roller shutters was still with mechanical surface-mounted switches and I wanted to replace these with a WiFi roller blind switch. The problem was that I couldn't use a built-in switch (I didn't have a hole in the…
I was looking for a small case for my home assistant pi 4 setup. I am using the geeekworm x862 ssd drive along with the 11mm embedded heatsink. This is a remix of https://www.thingiverse.com/thing:3714695 .
No chassis modification required for installation simply unscrew and replace a couple of screws with 2mm londer ones, for the shock mounts use 3mm nuts and washers to prevent chassis from scratching, usage of washers is recommended for…
Add two features A pivot point at the base so it feel more like actual controller thumbstick Replaceable thumbstick so it can be replace with TPU for better feel
Material: PETG, ABS, or ASA Two parts need to be printed: Pegs facing upwards Pegs facing upwards, mirrored along the Y axis No support required 0.20mm layer height You should be able to reuse the original 4 screws to assemble them. The…
MECH-X86 is a fully printable and poseable robot figure using Dummy 13 joints! You will need supports for this BTW. Also I will be making more of these! Hope you enjoy! :)
This is a case for the UDOO X86 Single Board Computer, designed in Onshape. I've added some holes and plugs for SMA Female RF connectors for those with the Ultra edition of the card, or have just added a wifi mini pcie card - you'll want…
The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed. The hand grip works also fine…
Darius is a Nano-ITX Intel® based single board computer with a ram slot, 2 mSata slots, and active cooling. This enclosure can be printed or modified to fit the Darius or other Nano ITX single board computers by customising its removable…
small bracket to mount a Raspberry Pi with X862 m.2 Shield to a 10" / 19" network cabinet uses 1 U
This is designed to sit atop the original case design by @tn00364361_495827. CWWK X86-P5 Devboard Case by tn00364361 | Download free STL model | Printables.com I didn't have the required screws for that case, so I whipped up something…
his is the case for a luggable, all-in-one SFF PC, which is an homage to and inspired by the Compaq Portable line of computers. The design phase of the project took a couple of months as an exercise in learning FreeCAD. The internal…
180 mm x 150 mm Skimmer Stand Total Height 86 mm (76 mm legs, 10 mm thickness of platform) Honeycomb Pores Round Legs Designed for Reef Breeders RR-150 Skimmer (Reef Rhythms series)
Mount for the X86-P5 development board with the 4x 4*M2 nvme expansion board . Space/clearance for air to travel around the nvme. Use four m2x12 countersunk screws to screw into the pre-existing holes in the heatsink. Print in PETG, 4…
Hi, this is a simple rackmount cover for the modular system 19" 2u rack for the UDOO x86 You can get the Frame on Amazon or directly from the Distributor…
mit PLA gedruckt Druckeinstellungen Füllung 15% Schichthöhe 0,2mm Stützen nur Box-Teil4.stl
TinyLlama single board x86 PC case. I created an case and buttons for version 1.1 of the Tiny Llama Vortex86EX SOM single board DOS computer in TinkerCAD. Revised 01/26/2023: Enlarged vga port opening in base. Widened space for 1.1 PCB…
Simple holder LED remote controls with a width of 40x86x7mm. I recommend using PLA filaments and setting the print to 0.2mm layer hight. It is recommended to attach the holder to the wall or furniture with double-sided adhesive tape.
The fan is a regular 120mm PC fan. The shield is for the board with red USB ports and FPC cable (rev 1.1). I might upload the shield for the board with blue ports as well. No promises. The shield is separate from the main body. It can be…
The backplate has two options either a fan or vent slots. Made with Solidworks - I'm new at it, so just got it to a point where it works. I've uploaded the source so you can tweak it if need be. Printed with CR10 V3 - Cura PETG 0.2 Layer…
The CWWK X86-P6 Pocket NAS has a Sticker on the back that hides essentially holes in the case. This snap-fit replacment hides those holes. Choose your color, add additional vents, have fun. The model was created in FreeCAD, I have…
So for this Cover, I have tested is the Malaysia 3x6 One, The UK one is untested. And the 2x Hole is for super short Metel Buttom, something like this: Note You need a 22mm Metal Button.
Customized version of https://www.thingiverse.com/thing:2334107 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2334107 Instructions Using the following options: maxDia = 58 centerBoreDia = 8.4…
Darius is a Nano-ITX Intel® based single board computer with a ram slot, 2 mSata slots, and active cooling. This enclosure can be printed or modified to fit the Darius or other Nano ITX single board computers by customising its removable…
MECH-X86 is a fully printable and poseable robot figure using Dummy 13 joints! You will need supports for this BTW. Also I will be making more of these! Hope you enjoy! :)
No chassis modification required for installation simply unscrew and replace a couple of screws with 2mm londer ones, for the shock mounts use 3mm nuts and washers to prevent chassis from scratching, usage of washers is recommended for…
its work in progress, in next iteration i want to add chaining .. so you can connect multiple to big one electric box for multiple sockets, remixes welcome!
Have you broken the original rear bumper mount? Print this model!
A spool cover to fit for a servo winch in the front of the RGT EX 86020 Intruder To prevent the wire to tangle when not under tension I used some longer m3 screws for the servo and a litle triming of the bumper holder, there is not a lot…
Customized version of https://www.thingiverse.com/thing:2334107 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2334107 Instructions Using the following options: maxDia = 58 centerBoreDia = 8.4…
86X86 table/desk container for thermostat switch socket base86X86 table/desk container for thermostat switch socket base
MECH-X86 is a fully printable and poseable robot figure using Dummy 13 joints! You will need supports for this BTW. Also I will be making more of these! Hope you enjoy! :)
kein support notwendig gedruckt mit Creality Ender 3 S1 Pro. Slicer: Cura Schrauben erforderlich
Zughaken für Fiskars UPX86 um abgeschnittene Äste herunter zu ziehen. einklappbar Schrauben erforderlich. Für Halterung UPX86.stl ist support erforderlich. gedruckt mit Creality Ender 3 S1 Pro. Slicer: Cura
This is a holder for fixing the AC adapter of ASUS wifi router RT-AX86U. Screw the holder to the wall in two places, and you can place an adapter on the holder horizontally.
This thing holds 2@ 92mm fans on an Asus AX86U wifi router. I started off printing NiscaTheOne's similar design, but it didn't meet my needs ( https://www.thingiverse.com/thing:5041793 ). Both versions blocked a few air holes on the…
Side mount for https://www.printables.com/model/278361-switch-wall-mounting-box-86x86mm. Not a remix but leaving marked as such to make a connection to where it can be used. Printed with PETG at 0.3mm layer and 25% infill.
