Liczymy pasujące modele…
This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…
Remixed the model of pianoplant to either include no hole in the top (original) or 3 more remixes that should be easier to print (for example with TPU) since they have simple overhangs. Original without the hole in the top Modified with…
This is a minimal headphone dock for Sony's 1000MX3 headphones. I found my headphone constantly running out of battery and wanted a place dedicated to charging them so they were always topped up (since I use them for 8 hours a day). I…
I recently went to treat myself a little bit and spent a little extra money for a new set of bluetooth earbuds. These WF-1000XM4 earbuds are amazing… and have the price tag to match (for a relatively broke university student, at least…
One of my first models. This is a headphones holder to stick to the side of my screen. It was specifically made to fit best my sony XM4 headphones. Of course it is fine more many other headphones.
Provides a loop for you to attach a location tracker to your Sony WF-1000XM4 headphone case, without adding the bulk of a full case. It has a nice snug fit and shouldn't slip off, but in case it's not tight, there is a slight indent for…
A fitted holder for the case of your trusty XM4s! Made to work with Skadis. Best printed upside down, with support enabled. It's possible to save on supports, by just placing a line of supports down the middle, and under the pegs.
Two pieces, they fit together as a friction fit. No supports are required. FreeCAD project file is included. By editing the parameters in the spreadsheet you can customize it to make it work with other brands of headphones too.
Holds extra ear tips for wireless ear buds. Designed for Sony WF-1000XM4, but likely works with many other styles.
Designed for Sony XM4 headphones, these cat-ear clip-ons are simple to print and assemble, with no need for supports nor instructions. Originally uploaded by myself on MakerWorld. Pt 1 & 2 of making:
The lack of modification options for the sony headphones made me create my own. They're glue on, but with simple plastic glue they won't damage the headphones (I tested thoroughly). Printed so the support is on the part that is attached…
Two piece headphone holder for Sony XM4 headphones. I printed with 15% infill, 0.2mm layers with brims and support for the board only. (the photo shows a stray strand of the brim).
Skadis mount for Sony WF-1000XM4 case
I printed my out of clear resin. I cannot guaranty any water resistance, do this at your own risk
The lack of modification options for the sony headphones made me create my own. They're glue on, but with simple plastic glue they won't damage the headphones (I tested thoroughly). Printed so the support is on the part that is attached…
Two piece headphone holder for Sony XM4 headphones. I printed with 15% infill, 0.2mm layers with brims and support for the board only. (the photo shows a stray strand of the brim).
this model require: -pen spring -some nail with diameter of 2mm -some part from the original box (optional). -some soft foam for impact protection.
Its not possible to disable detection sensor on the headphones, only in the app... but it freaking comes back from from time to time. This is my solution… If using after market pads, u might have to scale model to fit.
Recently I broke a left hinge of my headphones ear-cup mount. Unfortunately a new hinge costs more than $20, so I decided to try and recreate a hinge model and print it. You can find original Fusion360 project in f3d file. Hope someone…
Disclaimer: this is definitely not the best / easiest to print headset holder around. This was more of an excuse for me to experiment with dovetail joints running along an arc. You're probably better off searching for generic SKÅDIS…
My print: polymaker TPU-95HF 0.6mm nozzle 0.4mm layer height with adaptive layers on (without adaptive layer height maybe go for 0.2) Tree supports seemed to work best Important: There are cutouts on the back for where the hinge goes…
Holder/bracket for Nema 17 stepper motor. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes arre for M4 screws. Measurements: Height: 48mm Width: 47mm Length: 82mm Max stepper length: 56mm (motor can be longer if…
This is simple little print to help charge your SONY WH-1000XM4 wireless earbuds in your Tesla, or potentially any vertical Qi wireless charger. I can confirm it works with my 2022 Tesla Model 3 and my Anker Powerwave Stand. I just…
Arc does not need any support. Print it with decent brim. Base is best printed on a side. Arc and base can be used only lose coupled but also with the arc glued to the base. Parts are separated for better printability.
Printed without supports and minimal infill. I printed at 0.3mm as you can't see the curved bit when it's on the stand
The hole is a little bit oversize, so the case might rattle a bit. Prints without supports Made with blender by combining a bin generated by https://github.com/kennetek/gridfinity-rebuilt-openscad with the shape of the earbuds case.
With this model you can store your in ears on your skadis pegboard. I really liked the T-Nut system created by 6d6178 therfore you need to print two of his M2.5 T-nuts to mount this. The mount was designed to store the case with some kind…
If you download it, please leave a like. Accreditation to RostaP
This is a quick and easy solution for me since the XM4 clips are quite wide which means the headset can't rest comfortably on my head and ears. I sized the clip(s) down so that there are 1 click and 2 clicks or notches on the headband, I…
