Liczymy pasujące modele…
Replaceable Steering Wheel Cover for PXN V99/V10 (PRO/ULTRA) To install, remove the hexagon head screws from the wheel and replace the faceplate. To assemble the handles, you will also need: 6x M3 x 20 mm screws (DIN 912) 6x M3 nuts
This is based on the awesome MIG23MLD-Joystick-Gimbal by tiktrimo over on Github. Do check out the other cool things he's got going on here: https://github.com/tiktrimo https://imgur.com/user/tiktrimo The joystick is a replacement for the…
Replacement of the main gearbox handle for the PXN-A7. For installation, you will need a standard screw for fixing the main gearbox handle.
This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal. It is totally plug and play, you don't need to change the original electronics. It uses a inexpensive 50kg load cell a HX711 and a arduino…
wheel pxn v10 pro/ultra 325mm jeśli ktoś wykona będę wdzięczny za zdjęcie i komentarz
This is a quick mount I made for the PXN CB1 button box. It fits the "side arm" of the Next Level Racing wheel stand 2. I printed this with 4 walls and 15% infill and it seems to hold up well.
This Picatinny rail attachment allows you to add a flashlight or laserlight to the bottom of your SixNeedler.
Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.
The Krups Essenza Mini comes with two tiny driptrays. One is full after two cups of coffee, the other is always near empty. So I created a single compartment which does fit the original parts.
Introduction This is an adapter to mount the PXN-CB1 to a 8040 profile sim rig with a RAM mount. The linked RAM mount is made from black aluminium and fairly strong so the button box doesn’t shake while touching. The links below are…
I cannot use the original drip tray as it does not allow me to fit my favorite cup. I do tend to forget to put my cup in place at least once a week however, which then results in a big mess… sigh… For that sole reason i decided to print…
Item is for modeling only and is not intended for printing
This fender is meant to be a drop-in replacement for the stock Begode EXN fender. It fits into the pockets and grooves in the rear of the case. This design prints without supports in about 5 hours on my Prusa MINI+ Details: Filament:…
I modelled the original stand and then increased the area on which a cup can be placed. The optional brim is an anti-slip feature that should be carefully superglued to the top of the new stand. Print this in a food-safe material or…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
Remix GoPro Tripod Mount with a pocket hole for a 1/4" Hex Nut + remix for Insert Nut
This is my version of the PXN button box holder for Next Level racing rigs. It can be mounted to left or right of the rig, and is angled slightly up and towards the driver. Pring with at least 3 walls and 15% infill on a 0.4mm nozzle for…
PXN CB1 Control Button Box mount for 4040 aluminum extrusion. Features an adjustable angle for improved ergonomics. Includes a center hole for M8 rig mounting. The design allows the CB1 to rotate: install the central screw first, then set…
I have an RSeat P1 and while the tubular construction is rock solid, it does make mounting add-ons more difficult than a profile rig. So, like anyone would, i bolted a slab of oak to it. The oak shelf lets me use a trackpad, streamdeck,…
All parts have a 0.2mm tolerance relief and should snap together, except for the top two pieces which need to be glued or fused.
Para cuando tengas que contar muchas monedas, se te facilite el trabajo.
remixed statue of official oscar holding lipstick/ use for fun contests ;)
English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…
Happy printing! Description : I made my version of the fidget spinner body to practice the knurled textures. press-fit and/or with some superglue will work. Model height: 7mm (same as 608 bearings) Hole tolerance: 0.2mm (e.g. 22.2mm for…
Reflexní boky Radlice Tatra VT 8x8 Nalepte a přišroubujte ( Lesklá a hladká strana přijde z venčí )
English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…
Coin Holder for Mexican Pesos Suitable for coins 1, 2, 5, 10 Monedero para Pesos Mexicanos Adecuado para monedas 1, 2
I designed this model as a spare, since I broke the original. print in petg for food use, if possible coat it with resin
You can print this as big or small as you want. Do not need supports. I did not design the logo, just adapted it into a keychain.
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
Designed to fit a Scotch-Brite non-scratch scrub sponge and the IKEA VOXNAN soap dispenser with a roughly 75mm (3 in) diameter. https://www.ikea.com/us/en/p/voxnan-soap-dispenser-chrome-effect-20328978/ The IKEA VOXNAN soap dispenser…
Customized version of http://www.thingiverse.com/thing:2125460 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=2125460 Instructions Using the following options: _text12 = _text11 = _text10 = separatorsLid…
This is a shorter stand for keeping the PXN V9 GEN 2 wheel. My table was too small, and my knees kept on hitting the screws, so I designed a new stand that solves this specific problem. I want to maybe help others with that same issue.…
I might have to revisit this, if not here's the file to print the faceplate on a smaller printer like the Ender 3. You'll have to split to objects and resemble the little nubs with this version because I neglected to separate them in to…
I wanted to put hexnuts right near were the screws touches the bars, because after a while the screw will tear into the plastic and then it will no longer tighten, i had 2-3 fails with the stock prusa part this bugged the hell out of me…
Gridfinity assortment box / bin Generated box with dividers in different sizes. Width = 3 Length = 5 Height = 4 Walls X oriented < 9 Make your own custom designs for free with the super simple https://gridfinitygenerator.com where this…
This is a very low profile non-adjustable bracket for the PXN V900 Gen 2 steering wheel. I printed this in PLA on an Ender 3 at max speed, sliced using Cura, 10% gyroid infill, 4 walls, 0.28mm layer height, minimal supports just for the…
Bonjour, Voici ma tête d'impression direct-drive pour CR10S PRO V2. Montage hotend type V6 full métal en cuivre ! La description complète et les instructions d'achat hardware et de montage sont dans le PDF téléchargeable (instructions in…
=>MERCI DE BIEN LIRE LES MISES A JOUR SVP<= Bonjour, Je vous propose ici mon pack silence pour CR10S PRO V2 (n'ayant pas testé le montage sur la V1 je ne garantis pas la compatibilité au niveau du capteur de plateau). Toutes les…
English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…
2nd Gen pedals do not have a hole to bolt through to support the original, this allows owners to use the base design without needing to drill through their pedals. Also added an option to use the stock 50mm spring that comes with the…
English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…
An accurate model of cheap hobby 3D joystick. For mounting use 3mm thick board with 40mm hole in it. (that video is not
for universal use i didnt made holes for the screws so its needs a bit drilling and threaded insert for plastics or you can cut threads in the plastic if you need some modification just ask and i will try it to make it
There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…
A simple knob to add to an hex nut or to an screw with a hex head. The width and the hight of the knob and also of the hex nut can be adjusted via Fusion360 parameters. The stl works for me for an M6 with a tight fit. Maybe you have to…
Added inserts for M3 hexnuts on the brackets. I'm always a dingus putting things together and I strip the plastic, and I do not trust myself with the threaded heat inserts.
PXN GT One to Fanatec QR1 / QR1 Lite / QR2 Adapter (60mm Extension) This adapter connects a PXN GT One Steering Wheel (50.8 mm pattern) to Fanatec QR1, QR1 Lite, and QR2 systems. It provides a 60mm extension for better clearance and…
A simple hexnut. Dimensions may not be correct! Not tested nor printed myself!
Hey there lads and ladies, bought one of those cheap Chinese hotas sets ages ago. Unfortunately the grip was a little too small for my hands. Long story short, I recreated the joystick inner column so I can 3D print any grip I desire and…
This is a case I designed for the GRA & AFCH 6 digit IN12 Nixie clock ( https://gra-afch.com/catalog/diy-kit-for-nixie-tubes-clocks/diy-kit-for-nixie-tubes-clocks-in-12/ ). Requires a handful of extra PCB standoffs and screws to secure.…
As I live in Mexico, I remixed this gridfinity coin holder to hold 25¢, 10¢, 5¢, and 1¢ USD, as well as $10, $5, $2, and $1 MXN.
The fan is a regular 120mm PC fan. The shield is for the board with red USB ports and FPC cable (rev 1.1). I might upload the shield for the board with blue ports as well. No promises. The shield is separate from the main body. It can be…
Handle for M24-HEXNUT with 3-fold and 6-fold option. Parametric Fusion360-files attached for other sizes. Prints well in the stronger the better ;)
Made this as a joke because I couldn't get the idea out of my head. Sorry it took to long to make manifold. Its a mashup of the printer name the WXR and the car name the WRX. Hope you all enjoy!
When using the normal GoPro mount your video will be offcenter because or your Backpack straps beeing not straight. You can adjust this with these mounts. I would recommend the 10° Version.
Printed with ABS+, but PLA should also do it. Standard print settings - no special troops needed. One side slightly rounded for better insertion.…
Freezer side baskets for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00 Helps keep some of the smaller stuff from overflowing the small freezer shelves.
Wenn eine Krups Nespresso Pixie Clips XN3020 zu lange nicht benutzt wird, trocknet der Boilder und die Pumpe innen komplett aus. Bei Wiederinbetriebnahme schafft die trockene Pumpe es dann nicht, dass Wasser aus dem Wassertank anzusaugen.…
Simple M8 hexnut cover - friction fitted usualy works nice Any matterial + printable without supports size could be adjusted to fit also other M hexnuts sizes
You can use the bigger hole for spinning.
necessary: pedals for pxn v99 bolts m6x12 count - 4 bracket for pedals - 4 material for printing - PETg 0.2
This container is designed to fit beside the egg holder on a Whirlpool side-by-side refridgerator model GS2SHKXNQ00
lock for 26mm diameter tubes
Case for ethernet controller(compatible with Spectranet) for ZX Spectrum(produced by Shama). It's looking good even with 0.3 Draft PETG preset. I'd prefer use petg for this print cause it works better with self-tapping screw. 100% infill…
To complete the hinge you need a piano wire. It is used also to strengthen the clips. Place a pause at the uppest layer of the hole. Place the wire and let it cover with new layers. The logo is printed with black color in the first layer.…
It can be glued with super glue on the carriage. Should be printed at least with PETG better in ABS
Wuxn WXR screen faceplate, fits 5inch touch screen with raspberry pi. Best printed in PETG. Parts needed: Raspberry pi 4B Freenove 5inch touch display USB cable (A to B) (Fix the screen in place with a little hot glue in the corners from…
Adapted from The Triplex Fidget Spinner, by hodginsa ( https://www.thingiverse.com/thing:1871940 ), to use a M10 hexnut. Update 2017/07/10: fixed the issue of this model with Slic3r. Category: Toys & Games
No supports needed
A vertical coin organizer and dispenser tailored for Mexican currency. It features engraved labels at the base for clear identification. Ideal for keeping loose change tidy.
2D Art of the XNauts from Paper Mario Thousand Year Door. There is a Scientist version and a regular version. You can change the color an make an Elite XNaut
Made as a gift for my friend who happens to own a server hosting company called PylexNodes. If the logo does not fit with the base, I suggest playing with horizontal expansion (preferably base stand) or download the other stl logo file…
A Base for the IKEA VOXNAN soap dispenser caddy so the water and soap is collected. Printed with xpetg blue from extrudr Nozzle Heat: 220 Bed Temp.: 90
Two versions of the body allow for the Classic Boxnaught or print the plain body version and give him whatever face you want. Print at 200% scale for as close to the real thing as possible… for now. Again very fragile so I suggest a…
This model is used to replace the clamp given with the CB1 Button Box with a mount with a 1/4 insert. I used ruthex 1/4" insert and it works like a charm. You can used provided screws to mount the 3d printed part to the button box. I…
PA-GLAXNKKT-AL led profile/plug/dimmer
It squeezes down and holds the panel if you break the plastic.
Created to mount the Mellow Fly SHT36v3 to the Qidi X-Smart 3. Includes. 1. Backplate. Fits to exiting tool board mounts 2. Eddy Mount (Adjustable. Aim for 5-6mm from nozzle height) Needs M3 heat inserts and M3x8/10 bolt 3. Cover. Space…
Simple HexNut Cover for Tedi Led made with basic shapes in peusaprinter. Lovers chanver 71 mm Upper chamber 50.4 mm Oryginaly made for mnovitski https://www.thingiverse.com/thing:3964578 and TEDI led lamp like on the picture.
I decided to make a logo keychain for filament testing and using up those leftover roll bits, this print is 7grams.
bolt with hole for cables Category: DIY
Sometimes I have to carry my Gimble in my backpack and because y ride a motorcycle, the road can get really bumpy, so I need to protect everything in the backpack
I designed an holder for my IKEA Voxnan in the grindfinity system. Enjoy. Print settings on Bambu Lab X1 C Layer height 0.16mm 5% adaptive cubic infill smooth: on Filament: PLA Das Filament Grau
Bonjour, Voici la version de ma tête d'impression "Quiet pack" sans Direct-Drive. Vous aurez la possibilité de réduire votre ventilation de 30 à 50% pour un silence agréable sur votre CR10S PRO V2 (pas testé sur la V1). Il vous faut…
I was annoyed of the huge distance between the exit and the drip tray. Had coffee drops all around the coffee machine because I have low cups. Raised the drip tray. Fits perfectly with the original grid and into the machine.
¡Un exhibidor modular, expandible e infinito para la colección definitiva de monedas de 1 Peso Mexicano (1992 - presente)! Diseñé este sistema porque mi propia colección sigue creciendo y necesitaba una solución que pudiera crecer con…
I liked the look of the KeyHoldr but I don't trust screws directly into plastic. Hence the Hex Hole Modification! This is just the bottom plate with M2 and M3 Hex cutouts for strength.
I CAN REACH IT NOW
MXN Coin holder for $1, $2, $5 and $10. It also has a slot for bills a pencil and a slot in the middle where you could fit a phone or other supplies. I included holes in the bottom of the slot for easy cleaning and drainage The dimensions…
Shorter version of the fauxnicorn grips by DDW
Remixed to fit the PXN HBS, Print with pauses and drop in the nuts as you go.
Welcome to Series 03 of the Modular Brick System! This collection features 10 standard bricks with a width of 3 studs, ranging from 3x1 to 3x10. These 3xN pieces are excellent for unique structural offsets, overlapping joints, and…
After one too many session opening the base of my Thing-o-Matic and having the hex nuts fall out of the t-slots, I decided to do something about it. This design should hold the M3 hex nuts firmly in a t-slot, while still making them easy…
This distance plate is designed to lower the arm rest just a little bit to be a bit comfortable :-)
