Liczymy pasujące modele…
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Drywall anchor, easy to print
Update October 22 2022 - Added a whole version of the grip for anyone who wanted it. Here is my Luke Skywalker lightsaber featuring a slide-open control box to reveal the internal circuitry as featured in a deleted scene from Return of…
consider supporting me on my patreon http://www.patreon.com/wekster For the balloon I would suggest a vase mode or any other option without any infill.
Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly CaseStudyno8 . Also from Dogbert's emitter remix and timmy_d3's remix . It has…
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
MY NEW DRYWALL ANCHOR INSPIRED BY https://paulbhardware.com/snapskru-drywall-anchor-8x1-1-2-snap30011 I ADDED A BIT TIP TO IT AND IT IS ALSO DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER FIT TO THE WALL. PRINT WITH PETG AND AT…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Patreon This model needs supports to the chin. Luke Skywalker, a Force-sensitive human male,…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
A multipart drywall mount that can be oriented to print for optimal strength. I have printed at layer heights of 0.2mm and 0.35mm and both work fine. (It is a tight fit for the parts but that is exactly what we need for its application)…
Expands as screw is inserted to keep it snug in the drywall. No supports needed. Recommend printing at <0.20mm layer height.
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Drywall nubs? These auger-style drywall/plasterboard anchors have a little knob on the end that you can either hang skinny things on directly (like lanyards, picture frame wire), or you can use them as anchor points for accessories with…
Rigips/plasterboard dowels, 2 variants, with PZ2 or PH2/PD2 bit. Must pre-drill with Ø6 or Ø6.5mm drill! Printing from PETG or Nylon or strong, extra PLA variant. Filament layer adhesion must be very good! (I printed out from Fiberlogy…
“If you see me, it's already too late” SPIRIT A brushless flywheel blaster by wonderboy v1.6.2 - 11/18/2024 Once upon a time, I really wanted to build a T19 dart blaster (by torukmakto4). Some time later, I saw a Gryphon remix with a T19…
There are many types of commercially available drywall anchor. However, most of those designs don't perform well when 3d printed. So rather than recreating a design optimized for injection molding and adapting it to 3d printing I decided…
In my experience cable grommets are expensive, hard to find, and never quite the right size, shape, or color for my needs. That means they're a nearly perfect use-case for 3D printing, because you can print the exact number, size, and…
Had a chance to make some tweaks and gave him a base. Not perfect, but should be more accurate than the previous one. Faces are tricky to get right, but it's a lot of fun to try. Best printed upright with supports under nose/chin/back.…
Ever wanted to build an UK Ant weight / US Fairy weight, but you've had no idea where to start? The SVRN platform is a system I've developed and extensively battle tested over the last year to help get you started. The base robot is a 4wd…
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…
I like the phone holder, but the joints are bridges. Not anymore.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Printed in PETG. To remove the original blade I used a small flathead to pry the metal ring on the shaft until it breaks off (the small metal retaining ring). I then used pliers to pull it from the shaft. The fan blade should slide off…
Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…
Case for the BetaFPV Air65 TinyWhoop
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. Pennywise Duck. …They ALL float down here. When you're…
Why? My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser…
08/24/26: I've released a bigger version: 12/16/22 update: I finished printing using vanilla white PLA from Prusa. I’m updating some files as I encountered some issues. I also refined the mooring parts by making cleats so that’s also in…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
This is just the WWE heavyweight Championship belt. i printed it on my anycubic neo with pla. enlarged it to 105%
Description The “Stubbie” design by LD.P worked really well, but in common with the commercial plastic anchors I was getting breakages and No. 8 screws tended to strip out the anchor. So I set myself the following design goals: Should be…
The second lightsaber wielded Jedi Knight Anakin Skywalker during the time of The Clone Wars when he fell to the dark side. This is Anakin's lightsaber as it is seen in Episode III: Revenge of the Sith. The parts in the folders are parts…
Below is the original creator's description: The Modular Panel System (MPS) is a collection of files that can be used to assemble 3/4" plywood into just about any cubic shape. Currently it includes 3 files: MPS - Corner Clamp - Used to…
🌅🌅 May the 4th be with you! At MiniWorld3D we celebrate Star Wars Day of May 4th with a model inspired by Luke's iconic home at the Lars moisture farm in Tatooine. To be hidden from the Emperor and Darth Vader, Obi-Wan Kenobi took baby…
First you print the top 2 times, with the top down. there is no support needed inside the hinges. After that you can print all legs and hingepins. They all store easily inside and give you a wide range of table heigths. Assembly is super…
Features Fully customisable to suit any diameter of PVC pipe and to suit your own printer tolerances. Accurately calculates the length you need to cut your PVC pipe to in order to achieve a specific dimension (see OpenSCAD console…
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Print & acrylic draw.
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
I was very surprised at not finding this here. It's just a grip that slides under your wood/gypsum etc panel to help lift it. I made it to fit a 24x24cm bed, no support needed. Rare thing that happens: it's perfect (at least for me) on…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
These connectors can be used to build shelves, storage boxes, desks, and other useful items from pieces of nominal ½ - ¾ inch thick plywood. Each connector consists of an outer piece, a 90 deg angle, an X, a TEE, and one or two inner…
Logitech used to provide a case for their mobile mouse models and with older models you could store the USB dongle inside the mouse. Starting with the MX Anywhere 2 they unfortunately stopped this habit and now you get the pure mouse and…
I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…
This is a remix of UnimatrixRed's Lightsaber model, wherein I've added some basic LED lighting to the crystals. I've also revised the clamp lever model to make it easier to print, and have altered the nameplate on the display base to be…
I created an aid to help with rough polar-/daytime polar alignment for the Skywatcher Star Adventurer 2i. simply replace the batterie cover with this 3d printed version, put the phone in the phone holder and run software like “PS Align…
Now with 100% less motor Mounts!* The revised Body is through testing and now no longer requires fiddly motor mounts. The body works with both N10's and N20's, just clip the little tab out of the way if using with N20's. This works with…
Drywall anchor to hang light objects on drywall without a 2x4 stud. Size your screw so that it digs into the top hole, and will split the anchor as it is screwed in. Drill ¼" hole for the anchor, use #6 size screw 0.2mm layer height with…
General Information: A hand sanding tool for 150mm sanding discs and sanding grids with an optional vacuum adapter for dust extraction e.g. for woodworking or drywall works. Usable for 150mm sanding discs or grids I used 20mm…
DISCLAIMER: This lightsaber was modeled based on photos with no scale, so all measurements were guesses. Actual size may differ from props used in films. This is a simplistic lightsaber model based on photos of props used by Mark Hamill…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Just in time for Star Wars Day! Anakin Skywalker's Lightsaber, as wielded by Luke, Finn and Rey as well. This prop changes from movie to movie, so I've meshed together my favorite parts, mostly from Episodes 3,5 and 7, for this model. Be…
In case somebody needs a 3d model of mob7 frame for making custom canopy or whatever. The model is accurate to the production frame except symmetrical motor arms and straight duct profile.
Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…
Small MTG keyword ability bar tokens, as reminder for both you and your opponents! Easy to print, just thick enough so they are easy to pick up and don't bend easily, and make the text pop if you do a color change for the text layers. I…
If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2, Batman... Please support my work by subscribing to my youtube channel www.youtube.com/wekster
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
Here is another small key from Zelda, this time from Skyward Sword. I also designed a key from Twilight Princess if you were looking for that. Only found in Skyward Sword, this key appears multiple times in each dungeon. After finding one…
This is a simple drywall stud finder. It uses a strong neodymium magnet to detect drywall screws which indicates possible stud locations. Move the stud finder across the wall until the center indicator starts to rattle and snaps in place,…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
Vacuum dust catcher for drilling. It can be used on the wall or it can be used on the table. The sucking force of the vacuum automatically sticks it to the support and it will suck all kind of drilling dust. It is made for standard vacuum…
A nice little decoration. Ideally to sit on the top of you monitor or flat tv. Made this years ago and it was available on thingiverse. Now I corrected some flaws and designed again from zero. Can be printed on a Prusa Mini too if you…
Lifeguard buoy Print Settings Rafts: No Supports: Yes Infill: 60% Category: 3D Printing
This is a set of pieces that can be used to recreate a Luke Skywalker figure at 500% scale. This figure was released in 2016 and was included in 8 sets between 2016 - 2022. All of the stl files needed to create this have been included in…
Hardware: If you are using all 20 probing arms: M3 Heatset insert x80 M3*6 hex socket machine screw x60 M3*10 hex socket machine screw x20 0.4mm accupuncture needles (8cm) x20 - same ones you'd find for cleaning 3d printer nozzles…
For those seeking to make a more accurate Graflex saber replica: I re-designed the clamp section and adjusted the lengths of the top and bottom to be more faithful to how an authentic Graflex flash tube disassembles. Now when the saber is…
New version of the tray for the Skywatcher EQ6 R Pro mount, more rigid and with grooves. This tray can be mounted on any mount with a 2" diameter tube and an angle of 56°, to maintain horizontality. To prevent rotation on the polished…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Putting it at 4000% size should make it easier to work with. This model is perfection. Maybe a little less crisp, clear lining on the fur, but what do you expect?
you will find a instruction as pdf by "other files"
Key from serial and comics Locke & Key
My first try for a human face.
Description Everyone knows Luke's lightsaber from Return of the Jedi. Disney sells them (I have one). But for those with a keen eye for details will know that the lightsaber Luke uses in most of ROTJ does not match what we get in the…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
More miniatures see Collection
To remove the original blade use a small flathead to pry the metal ring off of the shaft. The toroidal fan is a press fit and is keyed to the shaft. This is a replacement fan blade for Honeywell's Turbo force fan. The new fan blade…
First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!
MY BEST DRYWALL ANCHOR YET IS DESIGNED TO USE A PHILLIPS HEAD SCREWDRIVER TO INSTALL ALSO HAS A BIT TIP ON IT THAT SNAPS OFF EASY FOR DIFFERENT LENGTH SCREWS TO BE INSERTED AND IS DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Here's Luke Skywalker's lightsaber from Return of the Jedi! Be sure to print two of the triangular indicator pieces, those are very small prints, I would suggest printing them at the same time as some of the larger pieces to let them cool…
Warning Some print issues on some original files, I solve it by changing from 0% to 15% infill on the upgrade parts which have failed with 0% infill. Definition C1 is the bottom color, C2 the middle one and C3 the top one. Printing Is…
This is the clutch and flywheel required for the VW Engine model. Updates: 9/11/2025: Narrowed the clutch pad just a bit.
This part is more eficent than the original part has a smooth sweep inside. Helps the pool to circulate the water. Improves and increases the water flow. Makes it easy for kids to fill water baloons Print Settings Printer Brand: Creality…
Eyegor is a blinking, articulating eye stalk with a plethora of base options to let you grow him anywhere. Stake him hidden in a potted plant, stick him in a cabinet for a scare or put a couple with weighted bases on someone’s desk just…
I designed this peculiar drywall anchor iteratively, following the demise of coat hanger screwed in drywall with "standard expansion-type drywall anchors" (the narrow split ones). I started by reproducing the "threaded" type of drywall…
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Original art created by us, then we used Hueforge to create this 200x200 piece Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab…
Enjoy your own Pennywise night lamp while you wait for the second movie. You need 1x LED red (balloon) 1x LED yellow (lower middle) 2x LED white (eyes and lower right) 4x 100Ohm resistor 3V power source Print the head and balloon without…
fully printable bump key, print in 100%infill in low layer height for quality (0.08) PETG preferred can be used as is, but it will wear down with use fairly quick. best if copied (key cutting kiosks work) and made in brass
