81 modeli
I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.
Sony NP-FZ100 battery case would be nice if you could post some photos after printing
The NP-FZ100 battery is used in the Sony A9 and A7-RIII. I had previously designed a battery for the A7-RII's batteries - something that was really needed given the rate you go through them. Now with the additional A7-RIII body (and…
This is 4x holder for the Sony NP-FZ100 battery. There is also a 2X version in the files. The lid attaches to the holder with 3x3mm magnets. Also attached are the Fusion 360 files. If the fit is too snug, please modify the current offset…
Very practical battery holder for 2 NP-FZ100 batteries + 2 SD cards and 2 Micro-SD cards. I got the idea from the Sony Facebook Group, but the creator removed the file from thingiverse and it is nowhere found again. As i found the Design…
------------------- Sept 2026 Update ----------------------- Following some helpful feedback, the original models have been marked as "DEPRECATED". The updated versions have an improved fit, and should hold the batteries more securely…
I've printed vertical ('sony' face on the plate) with support only for the top retention overhang, the small guides on both internal borders can be printed without any support. I tested it with 0.1 layer and with 0.2 layer, 20% infill;…
The idea was to use one per battery. And write on each side if the battery is full or empty. Push the battery from the open side until it snaps in.
I made multiple Sony NP-FZ100 Batterieholders for Gridfinity. 1xBatterie 1x1x3U (6U) 2xBatteries 1x2x3U (6U) 4xBatteries 2x2x3U (6U)
Designed to hold 8 Sony A7SII (NP-FZ100) Batteries
Sony NP-FZ100 1x2 Gridfinity bin stores 3 Batteries, and stacks when empty.
I have sliced the model in cura and added supports below the notches. Variant 2 has serrations on the sides that were intended to make it a grippy surface to aid removing the cover. But pressing on the side also jams the cover to the…
As a full time photographer I need a lot of batteries but they don't make nice cases to store them all together so I made one. I had 2 needs with this case which are it had to carry 4 batteries and it had to lock closed. I successfully…
Holder für two Sony NP-FZ100 batterys. I printed two in different colors to know which battery is full or empty.
Box na Sony baterie NP-FZ100 dvě varianty pro 6kusů a 12kusů (skládá se z vrch, spodek a 2x latch) Adaptér pro SD 5ks nebo CfA 7ks (zabírá místo jedné baterie) Je potřeba použít M3x30 šroubek na jeden box 6ks (4x latch, 2x pant) Jedná se…
stackable gridfinity 1x2x8 holder for two sony fz100 batteries. sd card slot is a bit of a ‘had-some-room-left’ sollution but it is possible to get it out ;)
Technics AEH-AZ100 charging case protective TPU skin
Belt holder for sony battery. It is equipped with a fuse, it is very tight. Printable version without supports it is possible to overcome the fuse by force. Version for printing with supports, the fuse must be unlocked before removing the…
Single sided battery protector / cap
Printed with fuzzy skin fuzzy skin thickness 0,1 fuzzy skin point distance 0,1
Skadis batteryholder for sony camerabattery.
This battery dispenser can hold 5 Sony NP-FZ100 batteries. This helps you cycle through your batteries more consistently instead of using the same one over and over. The support structure breaks off very easily. The support structure is a…
Oil filter wrench for Kawasaki Z1000 2010 oil filter. Fits for HF303 Hiflow and original Kawasaki oil filter. Ratchet 1/2in. Category: Hand Tools
Super simple battery holder for up to 4 Sony NP-FZ100 Batteries.
Holds four, Sony NP-FZ100 batteries with a snug enough fit to hold batteries securely while in a backpack. To remove a battery, just give it a little push from the hole in the 'bottom' side. I like to keep the fully charged batteries with…
Protective case for the Sony NP-FZ100 battery. No support is required for printing.
GUIDE https://www.instructables.com/Z100s-3D-Printed-Symmetric-Wireless-Mouse-Guide/ VIDEO GUIDE: https://youtu.be/o0P37Avcor0 -60g with AAA. Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable…
Il existe d'autres modèles à imprimer pour protéger les batteries NP-FZ100, mais celui-ci est une version minimaliste conçu pour protéger juste les contacts, sans prendre trop de place ni de poids. Le couvercle est bien serré sur la…
I recently bought a Beeline navigation device for my motorcycle. The mounting option for my type of motorcycle were either limited location wise, or bulky and ugly otherwise. So I decided to create my own option. In the cockpit attached…
This is a insert for Sony FZ100 camera batteries and compatible versions. The insert is designed for the incredible Whity's Rugged Box. It can house two Sony FZ100 batteries. Use more of these inserts to house as many batteries as you…
A quick remix from @Hami's designt to fit a single spare battery.
This model gives you the possibilty to mount a (good) aliexpress bicycle mount on a Kawasaki Z1000 steering block. This block is around the handle bars and therefore the mount cannot be attached directly to the bar itself. There are three…
It's Sony 3x NP-FZ100 battery holder but on horizontal. I printed it with 0.6mm nozzle at 0.35 layer height with PLA.
Skadis holder for 2 NP-FZ100 batteries, print with supports
The internet has many kinds of NP-FZ100 battery cases. I found some of them made of TPU were sold in places like Aliexpress, and I thought I could make them myself, so I made them. The symmetrical storage allows you to put the battery in…
Cap to protect the battery contacts and hold a single SD card
Funda protectora para tus baterías Sony NP-FZ100 ( Sony aIV ). Yo llevo tapas de diferentes colores para diferenciar si la batería está cargada o si es una batería que saco de la cámara porque ha quedado descargada. Impresas en PTEG
I wanted to carry an extra battery on the front of my backpack using Peak Design's Anchor Connectors or Think Tank Red Whip bungee straps. The Red Whips are really tight, but they do work. I used Inferno3D's (on MakerWorld) remix to remix…
This is a remix of the original no-screws parametric box, modified to hold six Sony FZ100 batteries securely.
A replacement for the factory fork covers for the Kawasaki GPZ1000RX (Ninja 1000R or ZX1000a) These thread onto the schrader valve cap threads (pictured last), unlike the originals which are just snap fits into the top of the fork tubes.…
Ein Rahmen zum einstecken eines Ladegeräts - für Sony NP-FZ100 Akkus - und zur montage z.B. an einer Wand. Das Ladegerät lässt sich durch die seitliche Öffnung herausdrücken und sitzt gut in der Halterung
This is an insert for my Eurobox/Gridfinity-Transportation-System to accomodate the Panasonic FZ1000, some (micro-)-SD-cards and a spare battery. It is 3.5 x 3.5 Gridfinity-units in size. I cut out the corners from this square to make…
Kawasaki part 920751762 is no longer produced. This is a near perfect replica of it and should be printed in a flexible material: Nylon, TPU, Ninjaflex, etc. The factory part has two cylindrical recessions on the bottom, most likely for…
I made my first version of these holders a few years ago for my camera batteries, and I really liked that I could see what is charged at a glance. Just keep charged ones with the contacts down, and drained ones flipped the other way. I…
Kawasaki KZ1000, KZ900, Z1000, Z900 oil cap fits most kawasaki models. M30x1,5 threads
This is a remix of a popular NP-FZ100 battery holder that holds 2 batteries but it is now a waistband clip model. I have added a waistband clip that makes this great for event photographers who have to change their batteries often and at…
Noctua 92mm x 14mm fan case for Minix NEO Z100-0dB. https://noctua.at/en/products/fan/nf-a9x14-pwm https://www.minix.com.hk/products/z100-0db-fanless-n100-mini-pc The fan is connected to a USB port (5v).
Design: Remixed from 490 MFG's design , brought into spec with Gridfinity Refined for magnet and screw support and still compatible with all regular Gridfinity spec baseplates. Print Settings: No special print settings are needed. I…
It is a great mini PC but under a constant heavy load in the summer heat eventually the Wi-Fi stops working. This fan shroud clips over the case. The 80mm fan I chose is USB powered and has variable speed. I found the lowest speed was…
Prints well with PETG on it's bottom with minimal supports on the top of the SD card area.
A cool keychain by Kawasaki brand.
Depending on accuracy of print , feet may require clearancing with rotary tool or engraver to fit over studs.
This piece provides a hot air flow block from the front radiator up through the E-Brake lever on 2016-2018 Yamaha YXZ1000R cars. This replaces the paper towel I crammed in around the E-Brake handle to stop getting blasted by really hot…
Gridfinity box for Camera batteries USB Charger (for NP-FZ100 / Alpha Sony batteries in my case)
I made a 1x3x6U Gridfinity Holder for my PATONA NP-FZ100 Charger.
I do have a special backpack for photographic gear. Often I do not want to take that much gear with me. Especially on short city trips etc. Then I take a day backpack or a simple shoulder back. Putting in the camera unprotected has then…
small and simple tray that fits my bluetooth in-ear headphone case perfectly. I use it with an angled USB C plug. USB-Charging Port accessible easy and fast to print, no supports designed close to the original case, rounded corners etc.…
This is a custom wall mount designed for the K&F Concept NP-FZ100 battery charger (with dimensions of approx. 21.5 × 54.1 mm) , which is often bundled with dual battery packs (2600mAh). The mount is fully compatible with the IKEA SKÅDIS…
A compact, rugged-style case for two Sony NP-FZ100 batteries and your choice of memory cards . The hinged lid, reinforcing ribs, and separate latch keep everything together in one organized package. Choose the card layout that matches…
Sony FZ100 battery charger holder / wall mount.
after the first winter, this part was broken. So I designed an easy to print replacement. the second design has two holes to secure it with a cable tie. print with 100% infill to make it stable
This is a custom wall mount designed for the RAVPower and BLUMAX NP-FZ100 battery chargers (older generation models) , used with Sony Alpha cameras such as A7III, A7IV, A7R III/IV/V, A7C, A7S III, A9, FX3, FX30, and others . ⚠ Please…
This mount was primarily developed for telescope pier mounting. It provides basic mist/condensation protection for this fanless minipc. It won't protect from huge rain but some light sprinkles should be fine. the cable mounts on the sides…
Voici un support GRIDFINITIRY pour batterie NP-FZ100 pour les boitier Sony Elles ont toutes été imprimé en PLA et avec un remplissage a 5% de type gyroïde Il y'a un petit gravage "BATTERIE" -------------- Here is a GRIDFINITIRY battery…
I tried several existing battery holders for both my Sony cameras and I found most to be too fat due to the fact they mostly orientated the batteries back to back upright. Since I fit them in my sleeve pocket of my camera bag, I wanted…
I added an M.2 ethernet controller to get a second LAN connection on my Minix Z300-0db. I had the ethernet connector board just hanging out loose out in a simple 3d printed box, but I wanted it more permanently mounted to the machine, so…
Precision Alignment for Charging This is a functional 3D printable adapter specifically designed and tested for the Technics EAH-AZ100 headphone case. EAH-AZ100 supports wireless charging, its small form factor prevents it from reaching…
Diese Schutzkappen ermöglichen eine beschädigungsfreie Demontage und Montage eloxierter Muttern an der Gabelbrücke sowie der Telegabel. Es sollte ohne Infill gedruckt werden.
A very simple friction fit lid NICKSH Sony NP-FZ100 battery case. I'd recommend using a rubber band as it will probably become less of a friction fit over time, but it works well enough to keep everything in place.
very basic, but functional output shaft seal driver for 1st gen z1000 and z750 engines.
Gridfinity Patona Charger Sony NP-FZ100 Sony A7IV A7III A7RV A9III Mirrorless Cameras I added small gap to eliminate Hull line when printing.
1st model I ever created. A simple dispenser for Sony NP-FZ100 batteries that can be mounted on Multiboard/Ikea Skadis.
As far as I know, this part has been discontinued, you can make it from various materials or use it as a carbon fiber mold.
Simple kawasaki z1000 keychain for best results recommended 0.2 nozzle.
Simple kawasaki z1000 keychain for best results recommended 0.2 nozzle.
It's Sony 3x NP-FZ100 battery holder but on horizontal. I printed it with 0.6mm nozzle at 0.35 layer height with PLA.
I added an M.2 ethernet controller to get a second LAN connection on my Minix Z300-0db. I had the ethernet connector board just hanging out loose out in a simple 3d printed box, but I wanted it more permanently mounted to the machine, so…
Voici un support GRIDFINITIRY pour batterie NP-FZ100 pour les boitier Sony Elles ont toutes été imprimé en PLA et avec un remplissage a 5% de type gyroïde Il y'a un petit gravage "BATTERIE" -------------- Here is a GRIDFINITIRY battery…
Depending on accuracy of print , feet may require clearancing with rotary tool or engraver to fit over studs.
This battery dispenser can hold 5 Sony NP-FZ100 batteries. This helps you cycle through your batteries more consistently instead of using the same one over and over. The support structure breaks off very easily. The support structure is a…
