Liczymy pasujące modele…
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
The three interlocking gear shaped holders are held in place by a frame at the bottom. The whole office organizer is print-in-place and no assembly is required. Beside its functionality this design also shows the possibilities of 3D…
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
This is the Case for the Raspberry Pi Zero ver1.3 Zero_Base_A is normal type Under Case. Zero_Base_B cover is Under Case with screw hole. Zero_Top_Basic is Top Case with I/O slot. Zero_Top_withCPUHole is Top Case with I/O slot and CPU fan…
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
If you have a Razer Viper Ultimate with the docking station you probably have or had this issue where the mouse just won't charge properly. The mouse always shifts a tiny bit down which prevents the mouse from charging most of the time. I…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
A station and organizer that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent, six brushes and a ink pen. Included are .stl, .3mf and two print files, one in PLA and other in PETG. Enjoy organizing.
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Introducing our 3D-Printed Movie Organizers: Elevate your movie collection with precision-crafted organizers for 4K UHD Blu-rays and Steelbooks. Others coming soon! Designed for accessibility and customizable to match your unique taste.…
Wanted a good and stable trash can in the front of my R1S. Bought the Yee Pin lower console organizer from Amazon to hold and stabilize it in place under the dash.…
I printed this in PETG on my Prusa Mini+ with 0.25mm layer height and 4 perimeters. The wedge is a bit shorter than the keypad so it would fit on my small print bed. You could easily extend it but it works well as it is.
Here is the model for an insert for an Ikea Kallax Drawer with the dimensions 27.5 x 30.5 cm. The box has the dimensions that it fits exactly 3 times in width and 2 times in length in the drawer. It's perfekt for cable management or…
Tassenuntersetzer bzw. Glasuntersetzer in verschiedenen Größen. Für Tassen/Gläser bis 90mm, 85mm, 75mm, 65mm, 55mm. Bei allen ist noch ein bisschen Luft, damit man nicht zu genau zielen muss mit der Tassen. Bei Heißgetränken empfehle ich…
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
Untersetzer mit Wabenmuster und Kreismuster / Coasters with honeycomb and circle pattern Maße 100x100mm / Dimensions 100x100mm
It is a buzzer into which a low-cost button and an LED strip can be integrated as electronic components. The assembled model can be screwed to a plate from below after threaded inserts have been melted in. A threaded insert must also be…
If you are like me, you have printed a lot of these because you don't want to shell out 20 bucks on a watch organizer. This solves that problem. Working in cooperation with rbelnienk182's Timeless Organization, this puts 4 of them into a…
Organizer for 12 types of hookah tobacco. The lid slides into a groove.
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
suitable for: cling film, aluminium foil, baking paper...
Follow the same directions as in Personalized Drink Holder by HP | Download free STL model | Printables.com , but with the insert and frame from this model. You'll need 5 of the rings from the original model (whether your own modified…
Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern und Sternenzerstörer habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Handy all-weather sign to print and attach (I just used some packing tape) to any area/table you may have outside your home for contact-less food delivery when sick (or in a COVID hot spot). I live in cold temps and this has survived two…
I made this thing for preventing accidently presing the pump when i travel and the bottle is in bag with other things what i not want to get sanytized. I upload also .BLEND file for easy remake in Blender Print Settings Printer Brand:…
Remix for smaller printers. I also modified something to have faster prints.
Print on the surface of the screw heads, then no support is needed.
Der Kaffeetassenuntersetzer schont den Tisch vor Hitze, abdrücken der Tasse und vor Kaffeetropfen.
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Für SD-Karte, Stifte, Taschenrechner, usw.
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
The containers are in sizes 5x5 / 5x10 / 5x15 / 5x20 / 5x25 / 10x10 / 10x15 / 10x20 / 10x25 / 15x15 / 15x20 / 15x25 / 20x20 / 20x25 / 25x25 / 30x5 / 30x10 / 30x15 / 30x20 / 30x25 / 30x30 cm. All are available with a smooth, designed…
For the updated version click here or on the link. https://www.printables.com/model/1210802-cable-organizer-oxo Chain Cable Organizer, Keeps All Your Cables Together Assembly instructions, place the pieces as shown in figure 1, then pull…
Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…
Organizer for shoes. 2023-02-17 Added versions with holes that should print fatser and use less material. 2023-02-26 Added a version of the model without a base.
Inspiration https://www.printables.com/model/122388-best-cable-clips
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Incastro Organize your desk with style! Incastro is designed to optimize the space on your desk to contain everything you need. The base is 240x100mm (3mm radius corners), where you can make various accessories to better manage your…
A simple yet effective cable organizer clip. Prints fast, looks good, does it's job. What more would you want? Features Three sizes available: Small for e.g. USB cables Medium for e.g. thicker quick charging cables Large for e.g. display…
Get every last drop of toothpaste out of the tube! The toothpaste squeezer grabs the toothpaste tube between the rollers. Turning the wheel will drive the gears and squeeze the toothpaste tube. Assembles without tools with a snap fit to…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity…
This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with…
After browsing over several modular drawer or small compartments projects, and even started to print a highly rated one, I realized that they were not ideal for my primary use case that was to store various types of small screw, nuts and…
This hoodie-shaped pen holder brings a sporty, playful look to any desk. Inspired by modern streetwear, it’s designed for young users, students, gamers, and creatives who want something fun but still functional on their workspace. The…
Designed to enhance desktop storage efficiency, this pen holder combines an Elongated Hexagon shape with Kumiko-style , blending Japanese minimalism with practical aesthetics. Available in two size options Version A : 95 × 150 x 100 mm…
To download the latest version click on the link. Organize all your workshop cables. Organize all your home and office cables. Organize your desk. version For small and medium sized cables click here or on the link.…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
Most of the packets for my kitchen/baking needs come in standard sizes. So I quickly drew up a model to store them in my cabinet. (The compartments are 65 mm x 20 mm each in clearance and 60 mm deep. If your packets differ, you can simply…
A skull-shaped holder/organizer with a hollowed-out section, perfect for storing small tools, pencils, pens, or other items. You can scale it freely according to your needs. Measure, resize, print. Printed with Fuzzy Skin effect. Fuzzy…
A lightweight Key Organzier: Prevent key scratches on your phone or wallet Easy to use with one hand : push keys out with index finger and select the key you need. Perfect when carrying stuff. Customizable in slicer to fit your amount of…
This is a fun fidget toy that you can squish and squeeze. Make this with PLA. All the parts snap together and don't require any glue, but if you want the parts to be even more securely connected, you can still glue the Squeezer Cap to the…
This design explores modularity as both a functional and aesthetic solution . By developing a system of interchangeable internal inserts, each tool—whether a pen, cutter, or marker—can be intuitively assigned its own space. The intent…
Stackable box organizer, usefull for workshops, for PC table, or wherever you need… I use it also for poops, when I know, there is small amout :)
Socket sizes: *Imperial Short 500 12pt - 1/2 inch drive - 3/8" to 1" in 16th increments *Imperial Short 375 12pt - 3/8 inch drive - 1/4" to 13/16" in 16th increments *Imperial Short 375 8pt - 3/8 inch drive - 1/4" to 1/2" in 16th…
Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…
Modular Desk Organizer System – Standard Set This Desk organizer design includes four interchangeable components sized to fit together naturally. The set consists of a Classic Phone Stand , Pen Holder Module , Storage Cup Module and a…
A 3D printable Voronoi pencil holder. Keep your pens and pencils in one place with this stylish Voronoi pencil holder. The Voronoi cell structure gives this holder an elegant look and translucent features. The model is easy-to-print,…
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
This model is a remix of the original “Catch-All Trays / Desk organizer” model. It is fully compatible with this remixing model and it can also be stacked on top of the original remixed model. The containers are in sizes 5x5 / 5x10 / 5x15…
Please read the description! When you decide to print my model please print the normal box first and look how it goes before you print the organizer holder! This model is not compatible with gridfinity! All inserts from the smaller box…
Tired of losing your remotes or dealing with cluttered surfaces? This remote control holder is the stylish and functional solution you’ve been looking for. Designed with versatility in mind, this sleek organizer isn’t just for remotes,…
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
This is a cable organizer for your desk to keep all those running wires organized in this sleek design I made in Audodesk Fusion 360. This was printed on the Anycubic Kobra 2 Neo Printer! This design can be printed with PLA or ABS to make…
Lot's of nice, clever, ingenious, good looking cable organizers out there - this is not one of those. This one is simple, effective and practical. Wind the cable on your fingers (3 of 4, depending on the size of your hand) and tuck it…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
Definitely my favorite addition to the Stackable Shelf Organizer so far! This is a drawer organizer in various sizes that is fully compatible with the parent design and simply drops into one of the shelves. You can use the organizer with…
Add a touch of natural magic and order to your home with our Tree Branch Organizer. This unique tree-shaped organizer is not only a practical solution for storing writing supplies but also a stylish accessory that will instantly enhance…
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Two half-width modules fit perfectly into one full-width slot, allowing flexible configurations based on your needs. Fully modular system 🔹 What’s included Full-width module Half-width module Divider drawer Connector See Also - Modular…
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
With this practical cat food pouch squeezer , you can get the very last bit out of every cat food pouch — cleanly, easily, and without sticky fingers. Short on Youtube: Wet cat food pouches often leave a surprising amount of food behind.…
**9/26/22** Updated model that uses 4mm screws with larger hinges and a small insert for an SD card in the top shell. Enjoy! Might revise the hinges since they seem like a weak point. I needed to drill the holes out a bit but other than…
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
I went looking for the model shown in the back-to-school contest picture, and was disappointed to find that the files only seemed to work for Cura (ie, totally unprintable for me). So I went back to that remix's original and made my own…
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Another cable clip! I designed this as I wanted to do a project with my son to use up the last bits of PLA left on our spools. It’s a simple design with a slight taper on the gap that prevents the cables from popping back out. Easily…
