28,550 models
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Most of the packets for my kitchen/baking needs come in standard sizes. So I quickly drew up a model to store them in my cabinet. (The compartments are 65 mm x 20 mm each in clearance and 60 mm deep. If your packets differ, you can simply…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for PETGSource material: PET
Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
This pencil organizer that's also a giant functional nut and bolt – size M80, to be exact. Interior dimensions: 69mm (diameter) x 107mm (height) External dimensions (WxDxH): 100mm x 114mm x 110mm I found that this was a nice size, both…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
Print approx. €8.11–€9.92 excl. taxPreliminary estimate for PETGSource material: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…
The Infinity Pen Holder is more than a simple desk organizer. With its clean, minimalist design inspired by the infinity symbol, this unique piece is the perfect blend of form and function. This model helps keep pencils, pens, and other…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
Taken from Thingiverse: https://www.thingiverse.com/thing:3679094
Print approx. €16.76–€20.49 excl. taxPreliminary estimate for one variant
Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A practical organizer designed for storing spice packets, baking ingredients, instant soups, and other small kitchen sachets. The angled compartments keep packets visible and easy to access while helping maintain a clean and organized…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets,…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
larger compartments 80x35mm new design
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
Easily customizable and removable IKEA SKADIS Jumper Wire Holder and Organizer it can holds up to 4 different lengths of jumper wires Assembly This model has a very tight fit You may need a hammer to insert the beams You can resize the…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Update: Sep. 12 2022 Added STEP and F3D files. Add in a color change for the last layer to achieve the outline effect. Mine is printed with 0.4mm layers, but any other layer height should work just as well. It also fits snugly right…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Stores individually wrapped tea bags vertically with display bag visible. Easy to pull from bottom with generous fingerhole cutout at front and bottom. Holds approximately 1.5 boxes of tea. When stocking tea bags, reverse half of them 180…
Print approx. €8.87–€10.84 excl. taxPreliminary estimate for PETGSource material: PET
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
18cm inner diameter (188mm outer) planter dish to put below planter or cover pots to collect and evaporate excess water. 140mm and 159mm inner diameter versions added. A variation with higher rim has been remixed by @FabianBaumeis_972452…
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
A remix of IOI671701's Hornady Comparator Set Organizer Box . This box will hold: 5 headspace comparator inserts (A, B, C, D, E) 8 bullet comparator inserts 1 anvil 1 spare grub screw (under the anvil) 1 comparator body 1 1/16" hex key…
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for PETGSource material: PET
This is a mandala organizer. It has never been so easy to be in order. It's something everyone can enjoy! The height is 2.5 cm, the width is 20 cm and the thickness is 0.2 cm. Before printing, see the printing instructions. Printing…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Safely store and protect your cables with ease, ensuring they stay neatly organized and tangle-free.
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
I designed this powerful tweezer for laboratory equipment whose purpose is to directly facilitate laboratory activities related to clinical, biological or chemical laboratories. Since I could not get functional efficiency from the designs…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
A mechanical tube squeezer to print yourself. It works not only for the plastic toothpaste tubes but also for metallic ones, like for mustard. Some of the parts have to be printed with ASA or similar material to achieve the required…
An enlargement of the stl model by 10% was used for the small packs and 65% for the large packs
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for one variant
Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Tired of searching for screws and small items in various jars and containers? This 3D-printed organizer is the solution! Easy to Use: Simply pour the contents of the jar into the organizer for a neat and organized setup. Special Funnel:…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
This is fun little pen holder in the shape of a guitar amp half stack. Pay attention to the settings below, and you should be able to print this very quickly and have a great result. I've also included a “blank” bottom template if you…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Organize your organizers with this Gridfinity compatible filament swatch organizer. The slot size is 3.2mm x 80mm and the organizer fits 20 filament swatches. This organizer is made specifically for the default size of this .scad…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
Print approx. €17.36–€21.22 excl. taxPreliminary estimate for one variant
Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Proudly my most detailed model so far which also looks great in brown or wood filament. Can be used with or without inserts to hold what you need. I added an insert for each of the batteries that I have and was able to physically test: AA…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
tweezer cover - the originals were soft and poorly visible (transparent in the photo)
A low profile USB drive, SD card and micro SD card organizer. Can be printed with whatever settings. IMPORTANT: Friend tried this model without scaling and had issues with a very tight fit in the usb and SC card slots while I had no…
Every one of these tweezers need less then 5meters. Have fun!
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Kids love to paint, and when they paint, the need a little squirt of each color. The kids in the school love these little ten pot paint organizers. Your little ones will love them too. When the day is done, it's easy clean up in the dish…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
The anytime sniffling, sneezing, coughing, aching, stuffy head, fever, so you can rest without heartworms medicine organizer. If you keep frequently-used medicines, vitamins, or other remedies in an easy-to-access location, this tray may…
Print approx. €11.06–€13.51 excl. taxPreliminary estimate for one variant
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Simple clip snapFit to hold the microphone of Razer gaming headset Compatible Razer Blackshark V2 Razer Blackshark V2X Razer Blackshark PRO (Wirelesse) maybe ? Printed with PET-G without issue 0.2 layer height - 100% infil Thank you and…
Need to organize your stain glass sheets, here you go. Width tolerance for the pieces of glass is 5mm.
Print approx. €11.12–€13.59 excl. taxPreliminary estimate for one variant
Are you tired of rummaging through piles of disorganized food coloring bottles thrown in a drawer or box??? If so this is the "printable" for you!!! This simple Gel Food Coloring bottle organizer will organize your life (ok seriously)….…
Not really a remix but an addition to the Charger Cable Organizer by DFV Tech . This base holds up to six Organizers, each of which can be taken out separately. Important: The Charger Cable Organizers themselves have to be printed at 120%…
My personnal proposition for organize all kind of stuff: Drawer with modulare compartment (1 or 2). Anti slip system (drawer won't fall if you move the shelf). Integrated label shape (for paper label or 3d printed label) Stackable shelf.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Thanks to x13a for the original model. Mainly i remixed the model to add 4 microSD Slots and to get the GoPro to fit in with this lens cap on.
I wanted a card trading post, but was annoyed it wouldn't fit in the original box, for which I already found the insert and organization to be subpar. So I created a set of boxes and parts and inserts to better organize my Catan game and…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
For just one or two tweezers
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.
This is a simple remix of model created by TinkrMakr I used Blender to add bevels around all the outer edges of the Squeezer.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Simple box to keep ramen organized in my cupboard. It is sized to fit at least a package of Neoguri.
Print approx. €15.43–€18.85 excl. taxPreliminary estimate for one variant
This is a replacement part for the Raspberry Pi Zero CSI connector. I printed this with a 0.4 mm nozzle at 0.1 mm layer height with PLA. I printed ten at a time to allow for cooling between layers.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I need specific pi zero enclosure then i created this minimalist raspberry Pi Zero enclosure with hexagon lid.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
3 tool holders in one. Hold 3x Tweezers, 5x files, and a pair of scissors on your Honeycomb Storage Wall.
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Printed on an Ender3 S1 Closes with a crisp snap fit Print settings : Print with open end facing upwards 0.2mm Layers 0% infill PLA @ 205C Bed@ 65C
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Safely store and protect your cables with ease, ensuring they stay neatly organized and tangle-free Print time : 44min button | 1h49min Case | 1h cap (you can also simply cut a 60x60mm or a 2mm plywood) The setting i used (trust the…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
A stand that holds 9 2oz acrylic bottles so you can easily store a decent set of basic paints. The model is optimized a bit to reduce material used, and is able to be printed without supports. I decided to make it 3x3 rows for easily…
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
The picture shows a typo, CR2033 corrected CR2032. Changed V13GA to LR44. V13GA battery is a same as LR44. LR44 is the more widely used name.
I made this pen organizer to hold this set of 42 Acrylic Pens sold on Amazon: https://www.amazon.co.uk/gp/product/B07NSMZKQL/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 The holes in the organizer are 12mm diameter and 60mm deep so…
This desk organizer includes a clock, calendar, pen holder, and compartments for paper clips and small notepads. Notepads with a size of 90 mm x 90 mm can be inserted. Instead of a calendar, a nice picture could also be used, for example.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Freezer door key for Frigidaire, Kenmore, GE freezers. Fits the square locks. Fits the same lock as these from Amazon . >[REPLACES PART NUMBER]: Manufacturer Part Number: 216702900. Replaces Part Numbers: 216702900 06599905, 08037402,…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
A simple holder for tweezers that only requires 2 slots in a row.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Premium player component insert is available on my Gumroads Store . Organizational insert for the board game Minecraft: Builders & Biomes by Ravensburg. My kids and I really enjoy this game but setup can be a little time consuming. I…
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for one variant
As a Type 1 Diabetic I need to inject insulin daily to live. This insulin also has to be stored in the fridge but when I used to stack them in the shelf on the door if more than 2 boxes were stacked up they'd slide over the top of the…
Print approx. €12.36–€15.11 excl. taxPreliminary estimate for PETGSource material: PET
Honestly this remix of this design is way better than mine original. https://www.printables.com/model/659216-gridfinity-tweezer-box-angled-entry Rest your tweezers with style. Gridfinity Yeah, by Zack Freedman - gridfinity.xyz. Box has…
Print approx. €5.47–€6.68 excl. taxPreliminary estimate for one variant
Here is my version of a seed packet organizer. Each ‘slot’ will hold one standard size seed packet for storage of a maximum of 10 packets. The design is also ribbed to provide additional support and make the print more rigid when printed…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
Angled speaker stand for Razer Leviathan v2. Desing of the stand goes well with the design of the speker. RGB is not restricted. + 25mm more room for your cables!
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
The Prusa i3 MK3S+ LCD Knob Extruder Motor Visualizer is a scaled-down version of the LCD Knob for the MK3S+ which has an embedded rare-earth magnet for use as an extruder motor visualizer. Also works great as a refrigerator or…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Print approx. €17.21–€21.03 excl. taxPreliminary estimate for one variant
Mein eigener Entwurf eines Stiftehalters/Schreibtischorganizers. Höhe: 100mm Kann skalliert werden. Yet another Desk Organizer. Heigth: 100mm Can be scaled. Category: Organization
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
An organizer that I designed to hold all the tools that I had, and it fits pretty comfortably next to the printer. Printed in standard Red PLA, 0.2mm layers. NO supports. GCode is using Prusa's Factory speed settings. Compatible with this…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
Modular Cutlery Organizers 5x5 cm 25x5 cm 20x5 cm 15x5 cm 10x10 cm Customizable
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
I have created a zero clearance insert for the Festool KSC60 sliding compound miter saw. I have added the .stl file as well as some print files for the Prusa mini. which you can just glue the pieces together. The print files are 100% fill…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Organizador de escritorio
Print approx. €18.47–€22.57 excl. taxPreliminary estimate for one variant
Bass fishing lures, Salt water fishing lures, Stick baits, Crank baits, Top water baits, glide baits ...whew. There are a lot of baits. And all of those baits are have a lot of sharp pointy hooks. If you are like most of us fisherpeople,…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
I couldn't find any existing models that perfectly fitted my needs (collecting coins from 50 cents to 2 euros and were not too bulky), so I designed my own model. Feel free to customize the dimensions (or anything else) to better suit…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
