Wood Crate organizer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: Spacer AA for WOOD CRATE with legs / spacer-aa-for-wood-crate_02mm_pla_mini_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 24.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
wood crate with inserts to organize different items
- Rating
- 4.889 / 5
- Likes
- 134
- Downloads
- 529
- Makes
- 11
- Views
- 2,133
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Proudly my most detailed model so far which also looks great in brown or wood filament.
Can be used with or without inserts to hold what you need.
I added an insert for each of the batteries that I have and was able to physically test:
- AA batteries
- AAA batteries
- GoPro Hero 7 Black batteries
- Gopro Hero MAX batteries
but I can add more inserts if you think you need a different one, just let me know.
PRINTING TIP
I noticed that some battery brands are slightly wider than others so I added a test file for each of the inserts, so you can test it first. Scale it up by 0.5 - 1% increments if needed and dont forget to scale the crate the same amount. (so first print the insert and after testing you can print the crate with the same scale)
Recommended settings:
Material: PLA/PETG
Layer height: 0.16 - 0.2
Nozzle diameter: 0.4 or 0.6
Infill: 10-12
Perimeters: 2
Supports: NO, as long as your layer height is not too big, mainly because of the details of the horizontal tables.
You can see my other models here:
________________________
If you like my designs and want to support me or sell physical prints, you can check out my patreon
https://www.patreon.com/meafdesigns
________________________