Original Prusa Enclosure Lid Prop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the Prusa Enclosure Lid to be held open, and you can work with out the lid getting in your way.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
I needed a way to hold the lid open when working by myself. Due to my setup, I can't open the lid the way it's probably meant to, so I have to have someone hold it while I'm working in from the top or have the lid sit on my head/back. Sometimes someone isn't always available to help me and it makes it hard to do certain things when I need to use both of my hands and hold the lid up on my head. So I created this! I had other versions in mind, but none of them worked out and they were causing me to use and then therefore waste a lot of filament. I used a piece of PVC pipe that I cut to roughly 22.5in (or 57.15 cm) then I cut a slant at each end. The top was originally meant to sit on the lid/handle , but that didn't work, however using it on the handle itself worked just as well.
PLA
0.2 Speed
No Supports - (flip the models so they sit on correct faces. I added a picture that will hopefully help)
15% infill