Crank handle for Vex robotics and automata. NOTE: updated hardier version https://www.printables.com/model/1363457-sturdy-high-torque-crank-handle-for-pltw-automata
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We use the Project Lead the Way curriculum in our engineering lab. This handle is useful for a few of the projects.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was designed with the big PLTW automaton project in mind, but can be used for any project using Vex axles. If you need a different type of hole, it's easy enough to use a negative volume in the Prusa Slicer, adjusting it to size. NEW: I have included a medium and a shorter handle to accommodate whatever box size you may be using to make an automaton.
Print this in two parts, and snap the peg into the handle. I found a good pressure fit in several filaments, but you can always glue it as needed. I printed the rotator piece standing on its peg end, and used organic supports, selectively painted on. It doesn't take much support, and should rotate easily once they are removed. Update: I will be uploading a heavier-duty redesign of this type of crank handle later today. Save this one for smaller and lighter-torque projects. Sadly, it failed to ongoing Teenager Test! Here's the beefy version: https://www.printables.com/model/1363457-sturdy-high-torque-crank-handle