1 / 3
Vehicle Bumper Scrape Guard (SlipLo Knock-off)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bumper Scrape Guards
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
I had looked online for a cheaper alternative to the SlipLo bumper scrape guard, and could not find any that i was satisfied with. I decided to model up this brief mockup of a SlipLo bumper guard. Attached is a guard with no internal bevels, one with 10 degree bevels every 25mm, and one with 20 degree bevels every 25mm. Print out of TPU and attach via hot glue or adhesive to the front bumper, chamfer side facing the ground.