GEN2 Decor - Gridfinity Drawers - STANDARD (Legacy)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original GEN2 185 Gridfinity Decor drawers. The new version is MODULITH 185 Gridfinity Decor Drawers.
- Rating
- 5 / 5
- Likes
- 136
- Downloads
- 930
- Makes
- 4
- Views
- 3,933
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
NEW VERSION: MODULITH 185 GRIDFINITY DECOR DRAWERS
These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet slots, and a tear-away front that keeps tall fronts dead straight while printing. New prints should start there.
This page stays up with the original files, so existing builds, makes and collections keep working.
 | ||
|
| |
The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.
The GEN2 Decor Gridfinity Drawers - Standard are a collection of the standard length drawer bodies, they combine the best of both the GEN2 Storage System and the Gridfinity system by Zack Freedman. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
Wait What is the GEN2 System? Watch this short video and prepare for storage awesomeness!
What you need?
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:
• GEN2 Modular Drawers - Standard - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!
• GEN2 Table Top Kit - Standard - Alternatively this kit will allow you to place your drawers on top of any table surface.
FACEPLATES | |
|---|---|
 |
Essential Series |
 |
Chevron Series |
 | EdgeMetal Series |
HANDLE/KNOBS | |
|---|---|
 |
BlockBar Series |
 |
Crystal Series |
Decor Drawers | |
|---|---|
 |
GEN2 Decor Drawers - Standard |
|
|
HARDWARE
Includes affiliated links to help support my projects
• Filament - Black PETG (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or Scratch Awl (for installing under tables)
• Magnets (Optional): 10x5x2mm or 10x2mm
• M3 nuts and screws: M3x6 - M3x10- I prefer this kit
For basic instruction on assembly please check out the above video
INSTRUCTIONS
• Push M3 nuts into slots on handles/knobs
• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.
• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time. You'll at least need the drawer case from this model kit to get started - GEN2 Modular Drawers - Standard.